Sensorless control of AC machines for low and zero speed operation without additional test signal injection

This work considers the sensorless control of AC machines for the low and zero speed operation range. Two novel techniques have been developed that use the inherit nature of the inverter PWM to estimate the rotor position of the machine. The inherent back EMF and the saliency of AC machines can be utilized to identify the rotor/flux position. The zero vector current derivative (ZVCD) technique for permanent magnet synchronous machines (PMSM) utilizes both of these effects. No additional test signals are injected into the machine and the difficulty in sensing the machine terminal voltage at low speed is eased. Only three standard current transducers are used in the drive system. For the position/ speed estimator only the machine current derivative during the relatively long (at low speed) zero voltage vectors is used for obtaining the rotor position. Practical results show the operation of the drive at several torque and speed conditions including stand still. A further method has been developed for the sensorless control of induction machines. The high frequency harmonics present in a PWM inverter drive system can be used to detect an equivalent impendence saliency that shows modulation due to rotor/ flux position saliency. The proposed method focuses particularly on the extraction of spatial saliency modulation due to rotor bar slotting effect, which can be used to determine the mechanical rotor position. No additional signal injection is required; the method simply employs some of the inherent PWM carrier harmonics

Local weak observability conditions of sensorless AC drives

Alternating current (AC) electrical drive control without mechanical sensors is an active research topic. This paper studies the observability of both induction machine and synchronous machine sensorless drives. Observer-based sensorless techniques are known for their deteriorated performance in some operating conditions. An observability analysis of the machines helps understanding (and improving) the observer's behavior in the aforementioned conditions.Comment: arXiv admin note: text overlap with arXiv:1512.0366

Impact of cross-saturation in sensorless control of transverse-laminated synchronous reluctance motors

Synchronous reluctance (SyR) motors are well suited to a zero-speed sensorless control, because of their inherently salient behavior. However, the cross-saturation effect can lead to large errors on the position estimate, which is based on the differential anisotropy. These errors are quantified in the paper, as a function of the working point. The so-calculated errors are then found in good accordance with the purposely obtained experimental measurements. The impact of the amplitude of the carrier voltage is then pointed out, leading to a mixed (carrier injection plus electromotive force estimation) control scheme. Last, a scheme of this type is used, with a commercial transverse-laminated SyR motor. The robustness against cross-saturation is shown, in practice, and the obtained drive performance is pointed out proving to be effective for a general-purpose applicatio

Self-Commissioning Algorithm for Inverter Non-Linearity Compensation in Sensorless Induction Motor Drives

In many sensorless field-oriented control schemes for induction motor (IM) drives, flux is estimated by means of measured motor currents and control reference voltages. In most cases, flux estimation is based on the integral of back-electromotive-force (EMF) voltages. Inverter nonlinear errors (dead-time and on-state voltage drops) introduce a distortion in the estimated voltage that reduces the accuracy of the flux estimation, particularly at low speed. In the literature, most of the compensation techniques of such errors require the offline identification of the inverter model and offline postprocessing. This paper presents a simple and accurate method for the identification of inverter parameters at the drive startup. The method is integrated into the control code of the IM drive, and it is based on the information contained in the feedback signal of the flux observer. The procedure applies, more in general, to all those sensorless ac drives where the flux is estimated using the back-EMF integration, not only for IM drives but also for permanent-magnet synchronous motor drives (surface-mounted permanent magnet and interior permanent magnet). A self-commissioning algorithm is presented and tested for the sensorless control of an IM drive, implemented on a fixed-point DSP. The feasibility and effectiveness of the method are demonstrated by experimental result

Cross-Saturation Effects in IPM Motors and Related Impact on Sensorless Control

Permanent-magnet-assisted synchronous reluctance motors are well suited to zero-speed sensorless control because of their inherently salient behavior. However, the cross-saturation effect can lead to large errors on the position estimate, which is based on the differential anisotropy. These errors are quantified in this paper as a function of the working point. The errors that are calculated are then found to be in good accordance with the purposely obtained experimental measurement

Position-sensorless control of permanent-magnet-assisted synchronous reluctance motor

The sensorless control of permanent-magnet-assisted synchronous reluctance (PMASR) motors is investigated, in order to conjugate the advantages of the sensorless control with full exploitation of the allowed operating area, for a given inverter. An additional pulsating flux is injected in the d-axis direction at low and zero speed, while it is dropped out, at large speed, to save voltage and additional loss. A flux-observer-based control scheme is used, which includes an accurate knowledge of the motor magnetic behavior. This leads, in general, to good robustness against load variations, by counteracting the magnetic cross saturation effect. Moreover, it allows an easy and effective correspondence between the wanted torque and flux and the set values of the chosen control variables, that is d-axis flux and q-axis current. Experimental verification of the proposed method is given, both steady-state and dynamic performance are outlined. A prototype PMASR motor will be used to this aim, as part of a purposely assembled prototype drive, for light traction application (electric scooter

Observability analysis of sensorless synchronous machine drives

This paper studies the local observability of synchronous machines using a unified approach. Recently, motion sensorless control of electrical drives has gained high interest. The main challenge for such a technology is the poor performance in some operation conditions. One interesting theory that helps understanding the origin of this problem is the observability analysis of nonlinear systems. In this paper, the observability of the wound-rotor synchronous machine is studied. The results are extended to other synchronous machines, adopting a unified analysis. Furthermore, a high-frequency injection-based technique is proposed to enhance the sensorless operation of the wound-rotor synchronous machine at standstill