FPGA-based implementation of the back-EMF symmetric-threshold-tracking sensorless commutation method for brushless DC-machines

The operation of brushless DC permanent-magnet machines requires information of the rotor position to steer the semiconductor switches of the power-supply module which is commonly referred to as Brushless Commutation. Different sensorless techniques have been proposed to estimate the rotor position using current and voltage measurements of the machine. Detection of the back-electromotive force (EMF) zero-crossing moments is one of the methods most used to achieve sensorless control by predicting the commutation moments. Most of the techniques based on this phenomenon have the inherit disadvantage of an indirect detection of commutation moments. This is the result of the commutation moment occurring 30 electrical degrees after the zero-crossing of the induced back-emf in the unexcited phase. Often, the time difference between the zero crossing of the back-emf and the optimal current commutation is assumed constant. This assumption can be valid for steady-state operation, however a varying time difference should be taken into account during transient operation of the BLDC machine. This uncertainty degrades the performance of the drive during transients. To overcome this problem which improves the performance while keeping the simplicity of the back-emf zero-crossing detection method an enhancement is proposed. The proposed sensorless method operates parameterless in a way it uses none of the brushless dc-machine parameters. In this paper different aspects of experimental implementation of the new method as well as various aspects of the FPGA programming are discussed. Proposed control method is implemented within a Xilinx Spartan 3E XC3S500E board

Discrete-Time Observer Design for Sensorless Synchronous Motor Drives

This paper deals with the speed and position estimation of interior permanent-magnet synchronous motor (IPM) and synchronous reluctance motor (SyRM) drives. A speed-adaptive full-order observer is designed and analyzed in the discrete-time domain. The observer design is based on the exact discrete-time motor model, which inherently takes the delays in the control system into account. The proposed observer is experimentally evaluated using a 6.7-kW SyRM drive. The analysis and experimental results indicate that major performance improvements can be obtained with the direct discrete-time design, especially if the sampling frequency is relatively low compared to the fundamental frequency. The ratio below 10 between the sampling and fundamental frequencies is achieved in experiments with the proposed discrete-time design.Peer reviewe

On extended Kalman filters with augmented state vectors for the stator flux estimation in SPMSMs

The demand for highly dynamic electrical drives, characterized by high quality torque control, in a wide variety of applications has grown tremendously during the past decades. Direct torque control (DTC) for permanent magnet synchronous motors (PMSM) can provide this accurate and fast torque control. When applying DTC the change of the stator flux linkage vector is controlled, based on torque and flux errors. As such the estimation of the stator flux linkage is essential. In the literature several possible solutions for the estimation of the stator flux linkage are proposed. In order to overcome problems associated with the integration of the back-emf, the use of state observers has been advocated in the literature. Several types of state observers have been conceived and implemented for PMSMs, especially the Extended Kalman Filter (EKF) has received much attention. In most reported applications however the EKF is only used to estimate the speed and rotor position of the PMSM in order to realize field oriented current control in a rotor reference frame. Far fewer publications mention the use of an EKF to estimate the stator flux linkage vector in order to apply DTC. Still the performance of the EKF in the estimation of the stator flux linkage vector has not yet been thoroughly investigated. In this paper the performance of the EKF for stator flux linkage is studied and simulated. The possibilities to improve the estimation by augmenting the state vector and the consequences of these alterations are explored. Important practical aspects for FPGA implementation are discussed

A comparative study of Kalman filtering for sensorless control of a permanent-magnet synchronous motor drive

Author name used in this publication: Borsje, P.Author name used in this publication: Wong, Y. K.Author name used in this publication: Ho, S. L.Refereed conference paper2004-2005 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe

Some Permanent Magnet Synchronous Motor (PMSM) Sensorless Control Methods based on Operation Speed Area

This paper compares some sensorless Permanent Magnet Synchronous Motor (PMSM) controls for driving an electric vehicle in terms of operating speed. Sensorless control is a type of control method in which sensors, such as speed and position sensors, are not used to measure controlled variables.  The controlled variable value is estimated from the stator current measurement. Sensorless control performance is not as good as a sensor-based system. This paper aims are to recommend a control method for the PMSM sensorless controls that would be used to drive an electric vehicle. The methods that we will discuss are divided into four categories based on the operation speed area.  They are a startup, low speed, high speed, and low and high-speed areas. The low and high-speed area will be divided into with and without switching.  If PMSM more work at high speed, the most speed area that is used, we prefer to choose the method that works at high speed, that is, the modification or combination of two or more conventional methods

Industrial applications of the Kalman filter:a review

International audienc

A novel, robust DSP-based indirect rotor position estimation for permanent magnet AC motors without rotor saliency

Copyright © 2003 IEEEThis paper proposes and implements a novel rotor position sensorless technique for PM AC motor drives, which allows acceleration from standstill and can operate under various practical operating conditions including transient speed changes. The technique developed here relies on the measurement of the phase voltages and currents of the motor. It uses the incremental values of flux linkage, and the back-EMF functions to estimate incremental rotor position. Using a phase-locked loop (PLL) algorithm, an internal closed-loop correction algorithm can correct rotor position estimation drift, which may be due to the motor parameter variations or measurement inaccuracies. The method is implemented in closed-loop using a digital signal processor (DSP), and details of the implementation are provided in the paper. To demonstrate accuracy, robustness and reliability of the position estimation scheme, the paper presents a number of real-time experimental results, including dynamic operating conditions.Li Ying and Nesimi Ertugr

A sensorless speed controller for induction motors

This paper presents a novel sensorless strategy for controlling speed in AC drives containing induction motors. The controller uses field oriented control strategy calculated with estimated rotor flux and speed. These estimates are obtained via a robust estimator.Fil: Busada, Claudio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; ArgentinaFil: Gómez Jorge, Sebastián. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; ArgentinaFil: Bambill, H.. Universidad Nacional del Sur. Departamento de Física; ArgentinaFil: Solsona, Jorge Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages". Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras. Instituto de Investigaciones en Ingeniería Eléctrica "Alfredo Desages"; Argentin

Speed Estimation for Indirect Field Oriented Control of Induction Motor Using Extended Kalman Filter

Speed sensors are required for the Field Oriented Control (FOC) of induction motors. These sensors reduce the sturdiness of the system and make it expensive. Therefore, a drive system without speed sensors is required. This paper presents a detailed study of the Extended Kalman Filter (EKF) for estimating the rotor speed of an Induction Motor (IM). Using MATLAB/SIMULINK software, a simulation model is built and tested. The simulation results illustrated and demonstrated the good performance and robustness of the EKF to estimate the high and low speed. Moreover, the performance of the EKF is found to be satisfactory in case there are externaldisturbances