Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Hardware schemes for early register release

Register files are becoming one of the critical components of current out-of-order processors in terms of delay and power consumption, since their potential to exploit instruction-level parallelism is quite related to the size and number of ports of the register file. In conventional register renaming schemes, register releasing is conservatively done only after the instruction that redefines the same register is committed. Instead, we propose a scheme that releases registers as soon as the processor knows that there will be no further use of them. We present two early releasing hardware implementations with different performance/complexity trade-offs. Detailed cycle-level simulations show either a significant speedup for a given register file size, or a reduction in register file size for a given performance level.Peer ReviewedPostprint (published version

Kilo-instruction processors: overcoming the memory wall

Historically, advances in integrated circuit technology have driven improvements in processor microarchitecture and led to todays microprocessors with sophisticated pipelines operating at very high clock frequencies. However, performance improvements achievable by high-frequency microprocessors have become seriously limited by main-memory access latencies because main-memory speeds have improved at a much slower pace than microprocessor speeds. Its crucial to deal with this performance disparity, commonly known as the memory wall, to enable future high-frequency microprocessors to achieve their performance potential. To overcome the memory wall, we propose kilo-instruction processors-superscalar processors that can maintain a thousand or more simultaneous in-flight instructions. Doing so means designing key hardware structures so that the processor can satisfy the high resource requirements without significantly decreasing processor efficiency or increasing energy consumption.Peer ReviewedPostprint (published version

Energy-efficient and high-performance lock speculation hardware for embedded multicore systems

Embedded systems are becoming increasingly common in everyday life and like their general-purpose counterparts, they have shifted towards shared memory multicore architectures. However, they are much more resource constrained, and as they often run on batteries, energy efficiency becomes critically important. In such systems, achieving high concurrency is a key demand for delivering satisfactory performance at low energy cost. In order to achieve this high concurrency, consistency across the shared memory hierarchy must be accomplished in a cost-effective manner in terms of performance, energy, and implementation complexity. In this article, we propose Embedded-Spec, a hardware solution for supporting transparent lock speculation, without the requirement for special supporting instructions. Using this approach, we evaluate the energy consumption and performance of a suite of benchmarks, exploring a range of contention management and retry policies. We conclude that for resource-constrained platforms, lock speculation can provide real benefits in terms of improved concurrency and energy efficiency, as long as the underlying hardware support is carefully configured.This work is supported in part by NSF under Grants CCF-0903384, CCF-0903295, CNS-1319495, and CNS-1319095 as well the Semiconductor Research Corporation under grant number 1983.001. (CCF-0903384 - NSF; CCF-0903295 - NSF; CNS-1319495 - NSF; CNS-1319095 - NSF; 1983.001 - Semiconductor Research Corporation

Early register release for out-of-order processors with register windows

Register windows is an architectural technique that reduces memory operations required to save and restore registers across procedure calls. Its effectiveness depends on the size of the register file. Such register requirements are normally increased for out-of-order execution because it requires registers for the in-flight instructions, in addition to the architectural ones. However, a large register file has an important cost in terms of area and power and may even affect the cycle time. In this paper we propose two early register release techniques that leverages register windows to drastically reduce the register requirements, and hence reduce the register file cost. Contrary to the common belief that out-of-order processors with register windows would need a large physical register file, this paper shows that the physical register file size may be reduced to the bare minimum by using this novel microarchitecture. Moreover, our proposal has much lower hardware complexity than previous approaches, and requires minimal changes to a conventional register window scheme. Performance studies show that the proposed technique can reduce the number of physical registers to the same number as logical registers plus one (minimum number to guarantee forward progress) and still achieve almost the same performance as an unbounded register file.Peer ReviewedPostprint (published version

ret2spec: Speculative Execution Using Return Stack Buffers

Speculative execution is an optimization technique that has been part of CPUs for over a decade. It predicts the outcome and target of branch instructions to avoid stalling the execution pipeline. However, until recently, the security implications of speculative code execution have not been studied. In this paper, we investigate a special type of branch predictor that is responsible for predicting return addresses. To the best of our knowledge, we are the first to study return address predictors and their consequences for the security of modern software. In our work, we show how return stack buffers (RSBs), the core unit of return address predictors, can be used to trigger misspeculations. Based on this knowledge, we propose two new attack variants using RSBs that give attackers similar capabilities as the documented Spectre attacks. We show how local attackers can gain arbitrary speculative code execution across processes, e.g., to leak passwords another user enters on a shared system. Our evaluation showed that the recent Spectre countermeasures deployed in operating systems can also cover such RSB-based cross-process attacks. Yet we then demonstrate that attackers can trigger misspeculation in JIT environments in order to leak arbitrary memory content of browser processes. Reading outside the sandboxed memory region with JIT-compiled code is still possible with 80\% accuracy on average.Comment: Updating to the cam-ready version and adding reference to the original pape

A fine-grain time-sharing Time Warp system

Although Parallel Discrete Event Simulation (PDES) platforms relying on the Time Warp (optimistic) synchronization protocol already allow for exploiting parallelism, several techniques have been proposed to further favor performance. Among them we can mention optimized approaches for state restore, as well as techniques for load balancing or (dynamically) controlling the speculation degree, the latter being specifically targeted at reducing the incidence of causality errors leading to waste of computation. However, in state of the art Time Warp systems, events’ processing is not preemptable, which may prevent the possibility to promptly react to the injection of higher priority (say lower timestamp) events. Delaying the processing of these events may, in turn, give rise to higher incidence of incorrect speculation. In this article we present the design and realization of a fine-grain time-sharing Time Warp system, to be run on multi-core Linux machines, which makes systematic use of event preemption in order to dynamically reassign the CPU to higher priority events/tasks. Our proposal is based on a truly dual mode execution, application vs platform, which includes a timer-interrupt based support for bringing control back to platform mode for possible CPU reassignment according to very fine grain periods. The latter facility is offered by an ad-hoc timer-interrupt management module for Linux, which we release, together with the overall time-sharing support, within the open source ROOT-Sim platform. An experimental assessment based on the classical PHOLD benchmark and two real world models is presented, which shows how our proposal effectively leads to the reduction of the incidence of causality errors, as compared to traditional Time Warp, especially when running with higher degrees of parallelism