Simulation and modeling of the behavior in the four-stroke spark ignition engine by using CFD simulation

Computational fluid dynamics (CFD) is a branch of fluid mechanics that use numerical analysis and data structures to analyze and solves problems that involve fluid flows. CFD have been applied to a wide range of research and engineering problems in many fields of study and industries, including engine and combustion analysis. The objective of this review paper is to analyze the behavior in the four-stroke Spark Ignition (SI) engine by using CFD simulation. To get the require result a few methods have been used to analyze the behavior in the engine such as using CAD geometric model where the solid works software have been prepared. Then, in the CAD geometric model also have ANSYS software to perform analysis in engine module. To predict the behavior of the engine during its working two type of analysis can be performed namely port flow simulation and combustion simulation. So, in first part of this report, the CFD analysis is carried out to analyze the performance parameter, including intake stroke, compression stroke, power stroke and exhaust stroke with hexane fuel combustion. For the results, some details of the engine model and some predicted results including temperature, flow time and pressure profiles. With the existence of CFD simulation it can help many fields of study and industries by predict and analyze the possibility that can be happened in the future. At the same time, serves as a quick and economical way of future engine designs and concepts

Network capacity optimisation in millimetre wave band using fractional frequency reuse

Inter Cell Interference (ICI) is a major challenge that degrades the performance of mobile systems, particularly for cell-edge users. This problem arises significantly in the next generation system, as the trend of deployment is with high densification, which yields an ultra-dense network (UDN). One of the challenges in UDN is the dramatic increase of ICI from surrounding cells. A common technique to minimise ICI is interference coordination techniques. In this context, the most efficient ICI coordination is fractional frequency reuse (FFR). This paper investigates the FFR in UDN millimetre wave network at 26GHz band. The focus is on dense network with short inter site distance (ISD), and higher order sectorisation (HOS). The metrics used in frequency reuse is the signal to interference plus noise ratio (SINR) rather than the distance, as the line of sight in millimetre wave can be easily blocked by obstacles even if they are in close proximity to the serving base station. The work shows that FFR can improve the network performance in terms of per user cell-edge data throughput and average cell throughput, and maintain the peak data throughput at a certain threshold. Furthermore, HOS has a potential gain over default sectored cells when the interference is carefully coordinated. The results show optimal values for bandwidth split per each scenario in FFR scheme to give the best trade-off between inner and outer zone users performance

Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey

In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner

A new hybrid model of dengue incidence rate using negative binomial generalised additive model and fuzzy c-means model: a case study in Selangor

Dengue is one of the top reason for illness and mortality in the world with beyond one­third of the world's population living in the risk areas of dengue infection. In this study, there are five stages to achieve the research objectives. Firstly, the verification of predetem1ined variables. Secondly, the identification of new datasets after clustered by district and Fuzzy C-Means Model (FCM). Thirdly, the development of models using the existing dataset and the new datasets which clustered by the two different clustering categories. Then, to assess the models developed by using three measurement methods which are deviance (D), Akaike Jnfonnation Criteria (AIC) and Bayesian Infonnation Criteria (BIC} Lastly, the validation of model developed by comparing the value of D, AIC and BIC between the existing model and the new models developed which used the new datasets. There are two different clustering techniques applied which are clustering the data by district and by FCM. This study proposed a new modelling hybrid framework by using two statistical models which are FCM and negative binomial Generalised Additive Model (GAM). This study successfully presents the significant difference in the climatic and non-climatic factors that influenced dengue incidence rate (DIR) in Selangor, Malaysia. Results show that the climatic factors such as rainfall with current month up to 3 months and number of rainy days with current month up to lag 3 months are significant to DIR. Besides, the interaction between rainfall and number of rainy days also shows strong positive relationship to DIR. Meanwhile, non-climatic vaiiables such as population density, number of locality and lag DIR from I month until 3 months also show significant relationship towards DIR For both clustering techniques, there are two clusters fonned and there are four new models developed in this study. After comparing the values of D, AIC ai1d BIC between the existing model and the new models, this study concluded that four new models recorded lower values compared to the existing model. Therefore, the four new models are selected to present the dengue incidence in Selangor

Subcarrier intensity modulated free-space optical communication systems

This thesis investigates and analyses the performance of terrestrial free-space optical communication (FSO) system based on the phase shift keying pre-modulated subcarrier intensity modulation (SIM). The results are theoretically and experimentally compared with the classical On-Off keying (OOK) modulated FSO system in the presence of atmospheric turbulence. The performance analysis is based on the bit error rate (BER) and outage probability metrics. Optical signal traversing the atmospheric channel suffers attenuation due to scattering and absorption of the signal by aerosols, fog, atmospheric gases and precipitation. In the event of thick fog, the atmospheric attenuation coefficient exceeds 100 dB/km, this potentially limits the achievable FSO link length to less than 1 kilometre. But even in clear atmospheric conditions when signal absorption and scattering are less severe with a combined attenuation coefficient of less than 1 dB/km, the atmospheric turbulence significantly impairs the achievable error rate, the outage probability and the available link margin of a terrestrial FSO communication system. The effect of atmospheric turbulence on the symbol detection of an OOK based terrestrial FSO system is presented analytically and experimentally verified. It was found that atmospheric turbulence induced channel fading will require the OOK threshold detector to have the knowledge of the channel fading strength and noise levels if the detection error is to be reduced to its barest minimum. This poses a serious design difficulty that can be circumvented by employing phase shift keying (PSK) pre-modulated SIM. The results of the analysis and experiments showed that for a binary PSK-SIM based FSO system, the symbol detection threshold level does not require the knowledge of the channel fading strength or noise level. As such, the threshold level is fixed at the zero mark in the presence or absence of atmospheric turbulence. Also for the full and seamless integration of FSO into the access network, a study of SIM-FSO performance becomes compelling because existing networks already contain subcarrier-like signals such as radio over fibre and cable television signals. The use of multiple subcarrier signals as a means of increasing the throughput/capacity is also investigated and the effect of optical source nonlinearity is found to result in intermodulation distortion. The intermodulation distortion can impose a BER floor of up to 10-4 on the system error performance. In addition, spatial diversity and subcarrier delay diversity techniques are studied as means of ameliorating the effect of atmospheric turbulence on the error and outage performance of SIM-FSO systems. The three spatial diversity linear combining techniques analysed are maximum ratio combining, equal gain combining and selection combining. The system performance based on each of these combining techniques is presented and compared under different strengths of atmospheric turbulence. The results predicted that achieving a 4 km SIM-FSO link length with no diversity technique will require about 12 dB of power more than using a 4 × 4 transmitter/receiver array system with the same data rate in a weak turbulent atmospheric channel. On the other hand, retransmitting the delayed copy of the data once on a different subcarrier frequency was found to result in a gain of up to 4.5 dB in weak atmospheric turbulence channel

Optimization of Spectrum Management in Massive Array Antenna Systems with MIMO

Fifth generation (5G), is being considered as a revolutionary technology in the telecommunication domain whose the challenges are mainly to achieve signal quality and great ability to work with free spectrum in the millimetre waves. Besides, other important innovations are the introduction of a more current architecture and the use of multiple antennas in transmission and reception. Digital communication using multiple input and multiple output (MIMO) wireless links has recently emerged as one of the most significant technical advances in modern communications. MIMO technology is able to offer a large increase in the capacity of these systems, without requiring a considerable increase in bandwidth or power required for transmission. This dissertation presents an overview of theoretical concepts of MIMO systems. With such a system a spatial diversity gain can be obtained by using space-time codes, which simultaneously exploit the spatial domain and the time domain. SISO, SIMO and MISO systems are differentiated by their channel capacity and their configuration in relation to the number of antennas in the transmitter/receiver. To verify the effectiveness of the MIMO systems a comparison between the capacity of SISO and MIMO systems has been performed using the Shannon’s principles. In the MIMO system some variations in the number of antennas arrays have been considered, and the superiority of transmission gains of the MIMO systems have been demonstrated. Combined with millimetre waves (mmWaves) technology, massive MIMO systems, where the number of antennas in the base station and the number of users are large, is a promising solution. SDR implementations have been performed considering a platform with Matlab code applied to MIMO 2x2 Radio and Universal Software Peripheral Radio (USRP). A detailed study was initially conducted to analyze the architecture of the USRP. Complex structures of MIMO systems can be simplified by using mathematical methods implemented in Matlab for the synchronization of the USRP in the receiver side. SISO transmission and reception techniques have been considered to refine the synchronization (with 16-QAM), thus facilitating the future implementation of the MIMO system. OpenAirInterface has been considered for 4G and 5G implementations of actual mobile radio communication systems. Together with the practical MIMO, this type of solution is the starting point for future hardware building blocks involving massive MIMO systems.A quinta geração (5G) está sendo considerada uma tecnologia revolucionária no setor de telecomunicações, cujos desafios são principalmente a obtenção de qualidade de sinal e grande capacidade de trabalhar com espectro livre nas ondas milimétricas. Além disso, outras inovações importantes são a introdução de uma arquitetura mais atual e o uso de múltiplas antenas em transmissão e recepção. A comunicação digital usando ligaçõe sem fio de múltiplas entradas e múltiplas saídas (MIMO) emergiu recentemente como um dos avanços técnicos mais significativos nas comunicações modernas. A tecnologia MIMO é capaz de oferecer um elevado aumento na capacidade, sem exigir um aumento considerável na largura de banda ou potência transmitida. Esta dissertação apresenta uma visão geral dos conceitos teóricos dos sistemas MIMO. Com esses sistemas, um ganho de diversidade espacial pode ser obtido utilizando códigos espaço-tempo reais. Os sistemas SISO, SIMO e MISO são diferenciados pela capacidade de seus canais e a sua configuração em relação ao número de antenas no emissor/receptor. Para verificar a eficiência dos sistemas MIMO, realizou-se uma comparação entre a capacidade dos sistemas SISO e MIMO utilizado os princípios de Shannon. Nos sistemas MIMO condecideraram-se algumas variações no número de agregados de antenas, e a superioridade dos ganhos de transmissão dos sistemas MIMO foi demonstrada. Combinado com a tecnologia de ondas milimétricas (mmWaves), os sistemas massivos MIMO, onde o número de antenas na estação base e o número de usuários são grandes, são uma solução promissora. As implementações do SDR foram realizadas considerando uma plataforma com código Matlab aplicado aos rádios MIMO 2x2 e Universal Software Peripheral Radio (USRP). Um estudo detalhado foi inicialmente conduzido para analisar a arquitetura da USRP. Estruturas complexas de sistemas MIMO podem ser simplificadas usando métodos matemáticos implementados no Matlab para a sincronização do USRP no lado do receptor. Consideraram-se técnicas de transmissão e recepção SISO para refinar a sincronização (com 16-QAM), facilitando assim a implementação futura do sistema MIMO . Considerou-se o OpenAirInterface para implementações 4G e 5G de sistemas reais de comunicações móveis. Juntamente com o MIMO na pratica, este tipo de solução é o ponto de partida para futuros blocos de construção de hardware envolvendo sistemas MIMO massivos

Performance Study of Hybrid Spread Spectrum Techniques

This thesis focuses on the performance analysis of hybrid direct sequence/slow frequency hopping (DS/SFH) and hybrid direct sequence/fast frequency hopping (DS/FFH) systems under multi-user interference and Rayleigh fading. First, we analyze the performance of direct sequence spread spectrum (DSSS), slow frequency hopping (SFH) and fast frequency hopping (FFH) systems for varying processing gains under interference environment assuming equal bandwidth constraint with Binary Phase Shift Keying (BPSK) modulation and synchronous system. After thorough literature survey, we show that hybrid DS/FFH systems outperform both SFH and hybrid DS/SFH systems under Rayleigh fading and multi-user interference. Also, both hybrid DS/SFH and hybrid DS/FFH show performance improvement with increasing spreading factor and decreasing number of hopping frequencies