Different Approaches of Numerical Analysis of Electromagnetic Phenomena in Shaded Pole Motor with Application of Finite Elements Method

In this paper is used Finite Element Method-FEM for analysis of electromagnetic quantities of small micro motor – single phase shaded pole motor-SPSPM. FEM is widely used numerical method for solving nonlinear partial differential equations with variable coefficients. For that purpose motor model is developed with exact geometry and material’s characteristics. Two different approaches are applied in FEM analysis of electromagnetic phenomena inside the motor: magneto-static where all electromagnetic quantities are analysed in exact moment of time meaning frequency f=0 Hz and timeharmonic magnetic approach where the magnetic field inside the machine is time varying, meaning frequency f=50 Hz. Obtained results are presented and compared with available analytical result

Ecohydrologically important subsurface structures in peatlands revealed by ground-penetrating radar and complex conductivity surveys.

The surface pattern of vegetation influences the composition and humification of peat laid down during the development of a bog, producing a subsurface hydrological structure that is expected to affect both the rate and pattern of water flow. Subsurface peat structures are routinely derived from the inspection of peat cores. However, logistical limits on the number of cores that can be collected means that the horizontal extent of these structures must be inferred. We consider whether subsurface patterns in peat physical properties can be mapped in detail over large areas with ground-penetrating radar (GPR) and complex conductivity by comparing geophysical measurements with peat core data along a 36 m transect through different microhabitats at Caribou Bog, Maine. The geophysical methods show promise. Peat horizons produced radar reflections because of changes in the volumetric moisture content. Although these reflections could not be directly correlated with the peat core data, they were related to the depth-averaged peat properties which varied markedly between the microhabitats. Well-decomposed peat below a hollow was characterized by a discontinuous sequence of chaotic wavy reflections, while distinct layering of the peat below an area of hummocks coincided with a pattern of parallel planar reflections. The complex conductivity survey showed spatial variation in the real and imaginary conductivities which resulted from changes in the pore water conductivity; peat structures may also have influenced the spatial pattern in the complex conductivity. The GPR and complex conductivity surveys enabled the developmental history of the different microhabitats along the studied transect to be inferred

Theoretical Developments in Electromagnetic Induction Geophysics with Selected Applications in the Near Surface

Near-surface applied electromagnetic geophysics is experiencing an explosive period of growth with many innovative techniques and applications presently emergent and others certain to be forthcoming. An attempt is made here to bring together and describe some of the most notable advances. This is a difficult task since papers describing electromagnetic induction methods are widely dispersed throughout the scientific literature. The traditional topics discussed herein include modeling, inversion, heterogeneity, anisotropy, target recognition, logging, and airborne electromagnetics (EM). Several new or emerging techniques are introduced including landmine detection, biogeophysics, interferometry, shallow-water electromagnetics, radiomagnetotellurics, and airborne unexploded ordnance (UXO) discrimination. Representative case histories that illustrate the range of exciting new geoscience that has been enabled by the developing techniques are presented from important application areas such as hydrogeology, contamination, UXO and landmines, soils and agriculture, archeology, and hazards and climat

Doctor of Philosophy

dissertationThe motivation for this work is the forward and inverse problem for magnetotellurics, a frequency domain electromagnetic remote-sensing geophysical method used in mineral, geothermal, and groundwater exploration. The dissertation consists of four papers. In the first paper, we prove the existence and uniqueness of a representation of any vector field in H(curl) by a vector lying in H(curl) and H(div). It allows us to represent electric or magnetic fields by another vector field, for which nodal finite element approximation may be used in the case of non-constant electromagnetic properties. With this approach, the system matrix does not become ill-posed for lowfrequency In the second paper, we consider hexahedral finite element approximation of an electric field for the magnetotelluric forward problem. The near-null space of the system matrix for low frequencies makes the numerical solution unstable in the air. We show that the proper solution may obtained by applying a correction on the null space of the curl. It is done by solving a Poisson equation using discrete Helmholtz decomposition. We parallelize the forward code on multicore workstation with large RAM. In the next paper, we use the forward code in the inversion. Regularization of the inversion is done by using the second norm of the logarithm of conductivity. The data space Gauss-Newton approach allows for significant savings in memory and computational time. We show the efficiency of the method by considering a number of synthetic inversions and we apply it to real data collected in Cascade Mountains. The last paper considers a cross-frequency interpolation of the forward response as well as the Jacobian. We consider Pade approximation through model order reduction and rational Krylov subspace. The interpolating frequencies are chosen adaptively in order to minimize the maximum error of interpolation. Two error indicator functions are compared. We prove a theorem of almost always lucky failure in the case of the right hand analytically dependent on frequency. The operator's null space is treated by decomposing the solution into the part in the null space and orthogonal to it

A multi-domain decomposition-based Fourier finite element method for the simulation of 3D marine CSEM measurements

We introduce a multi-domain decomposition Fourier finite element (MDDFFE) method for the simulation of three-dimensional (3D) marine controlled source electromagnetic measurement (CSEM). The method combines a 2D finite element (FE) method in two spatial dimensions with a hybrid discretization based on a Fourier FE method along the third dimension. The method employs a secondary field formulation rather than the total field formulation. We apply the MDDFFE method to several synthetic marine CSEM examples exhibiting bathymetry and/or multiple 3D subdomains. Numerical results show that the use of the MDDFFE method reduces the problem size by as much as 87 % in terms of the number of unknowns, without any sacrifice in accuracy

Gaussian process methodology for multi-frequency marine controlled-source electromagnetic profile estimation in isotropic medium

The marine controlled-source electromagnetic (CSEM) technique is an application of electromagnetic (EM) waves to image the electrical resistivity of the subsurface underneath the seabed. The modeling of marine CSEM is a crucial and time-consuming task due to the complexity of its mathematical equations. Hence, high computational cost is incurred to solve the linear systems, especially for high-dimensional models. Addressing these problems, we propose Gaussian process (GP) calibrated with computer experiment outputs to estimate multi-frequency marine CSEM profiles at various hydrocarbon depths. This methodology utilizes prior information to provide beneficial EM profiles with uncertainty quantification in terms of variance (95% confidence interval). In this paper, prior marine CSEM information was generated through Computer Simulation Technology (CST) software at various observed hydrocarbon depths (250–2750 m with an increment of 250 m each) and different transmission frequencies (0.125, 0.25, and 0.5 Hz). A two-dimensional (2D) forward GP model was developed for every frequency by utilizing the marine CSEM information. From the results, the uncertainty measurement showed that the estimates were close to the mean. For model validation, the calculated root mean square error (RMSE) and coefficient of variation (CV) proved in good agreement between the computer output and the estimated EM profile at unobserved hydrocarbon depths

Modeling the Subsurface Structure of Sunspots

While sunspots are easily observed at the solar surface, determining their subsurface structure is not trivial. There are two main hypotheses for the subsurface structure of sunspots: the monolithic model and the cluster model. Local helioseismology is the only means by which we can investigate subphotospheric structure. However, as current linear inversion techniques do not yet allow helioseismology to probe the internal structure with sufficient confidence to distinguish between the monolith and cluster models, the development of physically realistic sunspot models are a priority for helioseismologists. This is because they are not only important indicators of the variety of physical effects that may influence helioseismic inferences in active regions, but they also enable detailed assessments of the validity of helioseismic interpretations through numerical forward modeling. In this paper, we provide a critical review of the existing sunspot models and an overview of numerical methods employed to model wave propagation through model sunspots. We then carry out an helioseismic analysis of the sunspot in Active Region 9787 and address the serious inconsistencies uncovered by \citeauthor{gizonetal2009}~(\citeyear{gizonetal2009,gizonetal2009a}). We find that this sunspot is most probably associated with a shallow, positive wave-speed perturbation (unlike the traditional two-layer model) and that travel-time measurements are consistent with a horizontal outflow in the surrounding moat.Comment: 73 pages, 19 figures, accepted by Solar Physic