A 2.0 Gb/s Throughput Decoder for QC-LDPC Convolutional Codes

This paper propose a decoder architecture for low-density parity-check convolutional code (LDPCCC). Specifically, the LDPCCC is derived from a quasi-cyclic (QC) LDPC block code. By making use of the quasi-cyclic structure, the proposed LDPCCC decoder adopts a dynamic message storage in the memory and uses a simple address controller. The decoder efficiently combines the memories in the pipelining processors into a large memory block so as to take advantage of the data-width of the embedded memory in a modern field-programmable gate array (FPGA). A rate-5/6 QC-LDPCCC has been implemented on an Altera Stratix FPGA. It achieves up to 2.0 Gb/s throughput with a clock frequency of 100 MHz. Moreover, the decoder displays an excellent error performance of lower than $10^{-13}$ at a bit-energy-to-noise-power-spectral-density ratio ($E_b/N_0$) of 3.55 dB.Comment: accepted to IEEE Transactions on Circuits and Systems

Software-Defined Radio Demonstrators: An Example and Future Trends

Software-defined radio requires the combination of software-based signal processing and the enabling hardware components. In this paper, we present an overview of the criteria for such platforms and the current state of development and future trends in this area. This paper will also provide details of a high-performance flexible radio platform called the maynooth adaptable radio system (MARS) that was developed to explore the use of software-defined radio concepts in the provision of infrastructure elements in a telecommunications application, such as mobile phone basestations or multimedia broadcasters

Multidisciplinary Approaches and Challenges in Integrating Emerging Medical Devices Security Research and Education

Traditional embedded systems such as secure smart cards and nano-sensor networks have been utilized in various usage models. Nevertheless, emerging secure deeply-embedded systems, e.g., implantable and wearable medical devices, have comparably larger “attack surface”. Specifically, with respect to medical devices, a security breach can be life-threatening (for which adopting traditional solutions might not be practical due to tight constraints of these often-battery-powered systems), and unlike traditional embedded systems, it is not only a matter of financial loss. Unfortunately, although emerging cryptographic engineering research mechanisms for such deeply-embedded systems have started solving this critical, vital problem, university education (at both graduate and undergraduate level) lags comparably. One of the pivotal reasons for such a lag is the multi-disciplinary nature of the emerging security bottlenecks. Based on the aforementioned motivation, in this work, at Rochester Institute of Technology, we present an effective research and education integration strategy to overcome this issue in one of the most critical deeply-embedded systems, i.e., medical devices. Moreover, we present the results of two years of implementation of the presented strategy at graduate-level through fault analysis attacks, a variant of side-channel attacks. We note that the authors also supervise an undergraduate student and the outcome of the presented work has been assessed for that student as well; however, the emphasis is on graduate-level integration. The results of the presented work show the success of the presented methodology while pinpointing the challenges encountered compared to traditional embedded system security research/teaching integration of medical devices security. We would like to emphasize that our integration approaches are general and scalable to other critical infrastructures as well

Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Integrating emerging cryptographic engineering research and security education

Unlike traditional embedded systems such as secure smart cards, emerging secure deeply embedded systems, e.g., implantable and wearable medical devices, have larger “attack surface”. A security breach in such systems which are embedded deeply in human bodies or objects would be life-threatening, for which adopting traditional solutions might not be practical due to tight constraints of these often-battery-powered systems. Unfortunately, although emerging cryptographic engineering research mechanisms have started solving this critical problem, university education (at both graduate and undergraduate level) lags comparably. One of the pivotal reasons for such a lag is the multi-disciplinary nature of the emerging security bottlenecks (mathematics, engineering, science, and medicine, to name a few). Based on the aforementioned motivation, in this paper, we present an effective research and education integration strategy to overcome this issue at Rochester Institute of Technology. Moreover, we present the results of more than one year implementation of the presented strategy at graduate level through “side-channel analysis attacks” case studies. The results of the presented work show the success of the presented methodology while pinpointing the challenges encountered compared to traditional embedded system security research/teaching integration

Challenges in real-time virtualization and predictable cloud computing

Cloud computing and virtualization technology have revolutionized general-purpose computing applications in the past decade. The cloud paradigm offers advantages through reduction of operation costs, server consolidation, flexible system configuration and elastic resource provisioning. However, despite the success of cloud computing for general-purpose computing, existing cloud computing and virtualization technology face tremendous challenges in supporting emerging soft real-time applications such as online video streaming, cloud-based gaming, and telecommunication management. These applications demand real-time performance in open, shared and virtualized computing environments. This paper identifies the technical challenges in supporting real-time applications in the cloud, surveys recent advancement in real-time virtualization and cloud computing technology, and offers research directions to enable cloud-based real-time applications in the future

A study of FPGA-based System-on-Chip designs for real-time industrial application

This paper shows the benefits of the Field Programming Gate Array (FPGAs) in industrial control applications. The author starts by addressing the benefits of FPGA and where it is useful. As well as, the author has done some FPGA’s evaluation researches on the FPGA performing explaining the performance of the FPGA and the design tools. To show the benefits of the FPGA, an industrial application example has been used. The application is a real-time face detection and tracking using FPGA. Face tracking will depend on calculating the centroid of each detected region. A DE2-SoC Altera board has been used to implement this application. The application based on few algorithms that filter the captured images to detect them. These algorithms have been translated to a Verilog code to run it on the DE2-SoC boar