Spatially Decoupling of CP Antennas Based on FSS for 30GHz MIMO Systems

In this paper, an effective approach for mitigating the near-field coupling between four-port circularly polarized (CP) antennas in a 30-GHz multiple-input, multiple-output (MIMO) system is suggested and investigated. This is obtained by incorporating a two-layer transmission-type frequency selective surface (FSS) superstrate based on planar crossed-dipole metal strips. This paper presents a comparison between the mutual coupling when the patches are radiating in free space and in the presence of the FSS layers. The simulated results, when the FSS layers are applied, show an average of 6–12-dB improvement in the isolation between four adjacent CP-MIMO antennas. In addition, an accurate study is carried out on the insignificant reflections produced by the FSS layers to redirect those and also prevent any interference. The proposed 2×2 CP-MIMO antenna along with the superstrate is implemented and tested to validate the simulation results. Experimental results of the coupling and reflection coefficients and axial ratio show an acceptable agreement with the corresponding simulated ones

Performance Enhancement of Radiation and Scattering Properties of Circularly Polarized Antennas Using Frequency Selective Surface

At millimetre-wave (MMW) frequencies, losses associated with wireless link and system are critical issues that need to be overcome in designing high-performance wireless systems. To compensate the overall loss in a wireless communication system, a high-gain antenna is required. Circularly polarized (CP) antennas are among preferred choices to design because they offer many advantages due to their good resistance to polarization mismatch, mitigation of multipath effects, and some phasing issues and immunity to Faraday rotation. On the other hand, frequency selective surface (FSS) technology is recently employed to enhance the performance of radiation and scattering properties of antennas used in different sectors such as aerospace, medical, and microwave industry. Therefore, it is appropriate and attractive to propose the use of FSS technology to design practical and efficient CP antennas. CP Fabry-Perot cavity (FPC) antennas based on FSS are investigated in this thesis to fulfil the growing demand for broadband high-gain antennas with low radar cross section (RCS). The thesis investigates both characteristic improvement of CP antennas and RCS reduction issues employing FSS structures. Initially, a high gain CP dielectric resonator (DR) antenna is proposed. Using an FSS superstrate layer, a gain enhancement of 8.5 dB is achieved. A detailed theoretical analysis along with different models are presented and used to optimize the superstrate size and the air gap height between the antenna and superstrate layer. The second research theme focusses on developing an effective approach for mitigating the near-field coupling between four-port CP antennas in a Multiple-Input, Multiple-Output (MIMO) system. This is obtained by incorporating a two-layer transmission-type FSS superstrate based on planar crossed-dipole metal strips. Another technique for suppressing the spatially coupling between DR antennas using a new FSS polarization-rotator wall is studied as well. The coupling reduction is achieved by embedding an FSS wall between two DRAs, which are placed in the H-plane. Utilizing this FSS wall, the TE modes of the antennas become orthogonal, which reduces the spatially coupling between the two DRAs. The third research theme of this thesis is to enhance the purity and bandwidth of CP with the least amount of insertion loss by the use of an LP-to-CP-polarizer which is based on multilayer FSS slab. This polarizer is approximately robust under oblique illuminations. To have a high-gain CP antenna, an 8-element LP array antenna with Chebyshev tapered distribution is designed and integrated with the polarizer. Eventually, in order to enhance the scattering property, the fourth research theme investigates on RCS reduction by the use of two different approaches which are based on FSS. Initially, a wideband FSS metasurface for RCS reduction based on a polarization conversion is proposed. To distribute the scattered EM waves and suppress the maximum bistatic RCS of the metasurface over a broad band of incident angles at both polarizations, the elements are arranged using the binary coding matrix achieved by group search optimization (GSO) algorithm. The reflective two-layer metasurface is designed in such a way to generate reflection phase difference of 180° between two elements “0” and “1” on a broad frequency band. A theoretical analysis is performed on the ratio of the “0” and “1” elements using Least Square Error (LSE) method to find the best ratio value. As the second activity of this research theme, wideband CP antenna with low RCS and high gain properties is presented. The proposed antenna is based on a combination of the FPC and sequential feeding technique

A Broadband Meta surface Based MIMO Antenna with High Gain and Isolation For 5G Millimeter Wave Applications

This paper proposes a Broadband Meta surface-based MIMO Antenna with High Gain and Isolation For 5G Millimeter applications. A single antenna is transformed into an array configuration to improve gain. As a result, each MIMO antenna is made up of a 1x2 element array supplied by a concurrent feedline. A 9x6 Split Ring Resonator (SRR) elongated cell is stacked above the antenna to improve gain and eliminate the coupling effects between the MIMO components. The substrate Rogers 5880 with a thickness of 0.787mm and 1.6mm is used for the antenna and meta surface. Furthermore, antenna performance is assessed using S-parameters, MIMO characteristics, and radiation patterns. The final designed antenna supports 5G applications by embracing the mm-wave frequency spectrum at Ka-band, there is a noticeable increase in gain. In addition, once the meta surface is introduced, there is an improvement in isolation.&nbsp

Dielectric Resonator Antennas: Applications and developments in multiple-input, multiple-output technology

This article presents a comprehensive review of multiple-input, multiple-output (MIMO) dielectric resonator antennas (DRAs) that have evolved in the past decade. In addition to the major challenges faced during designing an MIMO DRA, this article also discusses research gaps that must be filled in the future. Exploring the advantages of DRAs, numerous novel designs have been proposed in the last few years

Antenna/Propagation Domain Self-Interference Cancellation (SIC) for In-Band Full-Duplex Wireless Communication Systems.

In-band full duplex (IBFD) is regarded as one of the most significant technologies for addressing the issue of spectrum scarcity in 5G and beyond systems. In the realization of practical IBFD systems, self-interference, i.e., the interference that the transmitter causes to the collocated receiver, poses a major challenge to antenna designers; it is a prerequisite for applying other self-interference cancellation (SIC) techniques in the analog and digital domains. In this paper, a comprehensive survey on SIC techniques in the antenna/propagation (AP) domain is provided and the pros and cons of each technique are studied. Opportunities and challenges of employing IBFD antennas in future wireless communications networks are discussed

mmWave polarization diversity wideband multiple-input/multiple-output antenna system with symmetrical geometry for future compact devices

The fifth generation (5G) of mobile networks is a significant technological advancement in telecommunications that provides faster data speeds, lower latency, and greater network capacity. One of the key technologies that enables 5G is multiple-input/multiple-output (MIMO) antenna systems, which allow for the transmission and reception of multiple data streams simultaneously, improving network performance and efficiency. MIMO is essential to meeting the demand for higher data rates and improved network performance in 5G networks. This work presents a four-element MIMO antenna system dedicated to the upper 5G millimeter-wave (mmWave) spectrum. The suggested antenna system is designed using an ultra-thin RO5880 substrate having total dimensions of 20 x 20 x 0.254 mm(3) with symmetrical geometry. The proposed antenna covers a fractional bandwidth of 46.875% (25-38 GHz), covering potential 5G bands of 26, 28, and 32 GHz, and offers isolation of >18 dB. The proposed MIMO system is fabricated and tested in-house. The antenna showed efficiency >88% at the potential band of interest and a peak gain of 3.5 dBi. The orthogonal arrangement of the resonating elements provides polarization diversity. Also, the MIMO parameters obtained, such as mean effective gain (MEG), envelope correlation coefficient (ECC), diversity gain (DG), channel capacity loss (CCL), and total active reflection coefficient (TARC), are found to have good performance. The measured results obtained are found to be in good agreement with simulations, hence making the proposed MIMO antenna suitable for handheld mmWave 5G devices.Prince Sultan University, Riyadh, Saudi Arabi

A Comprehensive Survey on 'Various Decoupling Mechanisms with Focus on Metamaterial and Metasurface Principles Applicable to SAR and MIMO Antenna Systems'

Nowadays synthetic aperture radar (SAR) and multiple-input-multiple-output (MIMO) antenna systems with the capability to radiate waves in more than one pattern and polarization are playing a key role in modern telecommunication and radar systems. This is possible with the use of antenna arrays as they offer advantages of high gain and beamforming capability, which can be utilized for controlling radiation pattern for electromagnetic (EM) interference immunity in wireless systems. However, with the growing demand for compact array antennas, the physical footprint of the arrays needs to be smaller and the consequent of this is severe degradation in the performance of the array resulting from strong mutual-coupling and crosstalk effects between adjacent radiating elements. This review presents a detailed systematic and theoretical study of various mutual-coupling suppression (decoupling) techniques with a strong focus on metamaterial (MTM) and metasurface (MTS) approaches. While the performance of systems employing antenna arrays can be enhanced by calibrating out the interferences digitally, however it is more efficient to apply decoupling techniques at the antenna itself. Previously various simple and cost-effective approaches have been demonstrated to effectively suppress unwanted mutual-coupling in arrays. Such techniques include the use of defected ground structure (DGS), parasitic or slot element, dielectric resonator antenna (DRA), complementary split-ring resonators (CSRR), decoupling networks, P.I.N or varactor diodes, electromagnetic bandgap (EBG) structures, etc. In this review, it is shown that the mutual-coupling reduction methods inspired By MTM and MTS concepts can provide a higher level of isolation between neighbouring radiating elements using easily realizable and cost-effective decoupling configurations that have negligible consequence on the arrays characteristics such as bandwidth, gain and radiation efficiency, and physical footprint

Techniques for Achieving High Isolation in RF Domain for Simultaneous Transmit and Receive

With the growth of wireless data traffic, additional spectrum is required to meet consumer demands. Consequently, innovative approaches are needed for efficient management of the available limited spectrum. To double the achievable spectral efficiency, a transceiver can be designed to receive and transmit signals simultaneously (STAR) across the same frequency band. However, due to the coupling of the high power transmitted signal into the collocated receiver, the receiver\u27s performance is degraded. For successful STAR realization, the coupled high-power transmit (Tx) signal should be suppressed by 100-120 dB over the entire operational bandwidth. So far, most STAR implementations are narrowband, and not useful for ultra wideband (UWB) communications. In this paper, we present a review of novel approaches employed to achieve improved cancellation across wide bandwidths in RF and propagation domains. Both single and multi-antenna systems are considered. Measurements show an average cancellation of 50 dB using two stages of RF signal cancellation

Analysis on Complex Frequency Selective Surface (FSS) using Finite Different Time Domain Method (FDTD)

In this paper, three different situations of the symmetry frequency selective surface (FSS) shaped are designed – consist of without symmetry, 1/4 symmetry and 1/8 symmetry condition using FORTRAN software. In this work, the Energy-Saving Glass (ESG) that covered the glass with a metallic oxide coating to exploit obstructive of infrared and ultraviolet radiation into structures. The tools used in this work were applied to propose a complex shape by using Genetic Algorithm (GA) as the optimization tool to create bits of the chromosome in designing the shape of energy-saving glass (ESG). It also used the Finite Difference Time Domain (FDTD) was working as a process of numerical algorithm modeling to design the complex shape in pixelized shape based on the unit cell idea. For without symmetry complex, 1/4 symmetry complex and 1/8 complex for FSS shape, it shows that the - 43 dB at 1.2 GHz, respectively