Hierarchical Agent-based Adaptation for Self-Aware Embedded Computing Systems

Siirretty Doriast

Autonomously Reconfigurable Artificial Neural Network on a Chip

Artificial neural network (ANN), an established bio-inspired computing paradigm, has proved very effective in a variety of real-world problems and particularly useful for various emerging biomedical applications using specialized ANN hardware. Unfortunately, these ANN-based systems are increasingly vulnerable to both transient and permanent faults due to unrelenting advances in CMOS technology scaling, which sometimes can be catastrophic. The considerable resource and energy consumption and the lack of dynamic adaptability make conventional fault-tolerant techniques unsuitable for future portable medical solutions. Inspired by the self-healing and self-recovery mechanisms of human nervous system, this research seeks to address reliability issues of ANN-based hardware by proposing an Autonomously Reconfigurable Artificial Neural Network (ARANN) architectural framework. Leveraging the homogeneous structural characteristics of neural networks, ARANN is capable of adapting its structures and operations, both algorithmically and microarchitecturally, to react to unexpected neuron failures. Specifically, we propose three key techniques --- Distributed ANN, Decoupled Virtual-to-Physical Neuron Mapping, and Dual-Layer Synchronization --- to achieve cost-effective structural adaptation and ensure accurate system recovery. Moreover, an ARANN-enabled self-optimizing workflow is presented to adaptively explore a "Pareto-optimal" neural network structure for a given application, on the fly. Implemented and demonstrated on a Virtex-5 FPGA, ARANN can cover and adapt 93% chip area (neurons) with less than 1% chip overhead and O(n) reconfiguration latency. A detailed performance analysis has been completed based on various recovery scenarios

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Self-healing concepts involving fine-grained redundancy for electronic systems

The start of the digital revolution came through the metal-oxide-semiconductor field-effect transistor (MOSFET) in 1959 followed by massive integration onto a silicon die by means of constant down scaling of individual components. Digital systems for certain applications require fault-tolerance against faults caused by temporary or permanent influence. The most widely used technique is triple module redundancy (TMR) in conjunction with a majority voter, which is regarded as a passive fault mitigation strategy. Design by functional resilience has been applied to circuit structures for increased fault-tolerance and towards self-diagnostic triggered self-healing. The focus of this thesis is therefore to develop new design strategies for fault detection and mitigation within transistor, gate and cell design levels. The research described in this thesis makes three contributions. The first contribution is based on adding fine-grained transistor level redundancy to logic gates in order to accomplish stuck-at fault-tolerance. The objective is to realise maximum fault-masking for a logic gate with minimal added redundant transistors. In the case of non-maskable stuck-at faults, the gate structure generates an intrinsic indication signal that is suitable for autonomous self-healing functions. As a result, logic circuitry utilising this design is now able to differentiate between gate faults and faults occurring in inter-gate connections. This distinction between fault-types can then be used for triggering selective self-healing responses. The second contribution is a logic matrix element which applies the three core redundancy concepts of spatial- temporal- and data-redundancy. This logic structure is composed of quad-modular redundant structures and is capable of selective fault-masking and localisation depending of fault-type at the cell level, which is referred to as a spatiotemporal quadded logic cell (QLC) structure. This QLC structure has the capability of cellular self-healing. Through the combination of fault-tolerant and masking logic features the QLC is designed with a fault-behaviour that is equal to existing quadded logic designs using only 33.3% of the equivalent transistor resources. The inherent self-diagnosing feature of QLC is capable of identifying individual faulty cells and can trigger self-healing features. The final contribution is focused on the conversion of finite state machines (FSM) into memory to achieve better state transition timing, minimal memory utilisation and fault protection compared to common FSM designs. A novel implementation based on content-addressable type memory (CAM) is used to achieve this. The FSM is further enhanced by creating the design out of logic gates of the first contribution by achieving stuck-at fault resilience. Applying cross-data parity checking, the FSM becomes equipped with single bit fault detection and correction

Autonomous Recovery Of Reconfigurable Logic Devices Using Priority Escalation Of Slack

Field Programmable Gate Array (FPGA) devices offer a suitable platform for survivable hardware architectures in mission-critical systems. In this dissertation, active dynamic redundancy-based fault-handling techniques are proposed which exploit the dynamic partial reconfiguration capability of SRAM-based FPGAs. Self-adaptation is realized by employing reconfiguration in detection, diagnosis, and recovery phases. To extend these concepts to semiconductor aging and process variation in the deep submicron era, resilient adaptable processing systems are sought to maintain quality and throughput requirements despite the vulnerabilities of the underlying computational devices. A new approach to autonomous fault-handling which addresses these goals is developed using only a uniplex hardware arrangement. It operates by observing a health metric to achieve Fault Demotion using Recon- figurable Slack (FaDReS). Here an autonomous fault isolation scheme is employed which neither requires test vectors nor suspends the computational throughput, but instead observes the value of a health metric based on runtime input. The deterministic flow of the fault isolation scheme guarantees success in a bounded number of reconfigurations of the FPGA fabric. FaDReS is then extended to the Priority Using Resource Escalation (PURE) online redundancy scheme which considers fault-isolation latency and throughput trade-offs under a dynamic spare arrangement. While deep-submicron designs introduce new challenges, use of adaptive techniques are seen to provide several promising avenues for improving resilience. The scheme developed is demonstrated by hardware design of various signal processing circuits and their implementation on a Xilinx Virtex-4 FPGA device. These include a Discrete Cosine Transform (DCT) core, Motion Estimation (ME) engine, Finite Impulse Response (FIR) Filter, Support Vector Machine (SVM), and Advanced Encryption Standard (AES) blocks in addition to MCNC benchmark circuits. A iii significant reduction in power consumption is achieved ranging from 83% for low motion-activity scenes to 12.5% for high motion activity video scenes in a novel ME engine configuration. For a typical benchmark video sequence, PURE is shown to maintain a PSNR baseline near 32dB. The diagnosability, reconfiguration latency, and resource overhead of each approach is analyzed. Compared to previous alternatives, PURE maintains a PSNR within a difference of 4.02dB to 6.67dB from the fault-free baseline by escalating healthy resources to higher-priority signal processing functions. The results indicate the benefits of priority-aware resiliency over conventional redundancy approaches in terms of fault-recovery, power consumption, and resource-area requirements. Together, these provide a broad range of strategies to achieve autonomous recovery of reconfigurable logic devices under a variety of constraints, operating conditions, and optimization criteria

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

내장형 프로세서에서의 코드 크기 최적화를 위한 아키텍처 설계 및 컴파일러 지원

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2014. 2. 백윤흥.Embedded processors usually need to satisfy very tight design constraints to achieve low power consumption, small chip area, and high performance. One of the obstacles to meeting these requirements is related to delivering instructions from instruction memory/caches. The size of instruction memory/cache considerably contributes total chip area. Further, frequent access to caches incurs high power/energy consumption and significantly hampers overall system performance due to cache misses. To reduce the negative effects of the instruction delivery, therefore, this study focuses on the sizing of instruction memory/cache through code size optimization. One observation for code size optimization is that very long instruction word (VLIW) architectures often consume more power and memory space than necessary due to long instruction bit-width. One way to lessen this problem is to adopt a reduced bit-width ISA (Instruction Set Architecture) that has a narrower instruction word length. In practice, however, it is impossible to convert a given ISA fully into an equivalent reduced bit-width one because the narrow instruction word, due to bitwidth restrictions, can encode only a small subset of normal instructions in the original ISA. To explore the possibility of complete conversion of an existing 32-bit ISA into a 16-bit one that supports effectively all 32-bit instructions, we propose the reduced bit-width (e.g. 16-bit × 4-way) VLIW architectures that equivalently behave as their original bit-width (e.g. 32-bit × 4-way) architectures with the help of dynamic implied addressing mode (DIAM). Second, we observe that code duplication techniques have been proposed to increase the reliability against soft errors in multi-issue embedded systems such as VLIW by exploiting empty slots for duplicated instructions. Unfortunately, all duplicated instructions cannot be allocated to empty slots, which enforces generating additional VLIW packets to include the duplicated instructions. The increase of code size due to the extra VLIW packets is necessarily accompanied with the enhanced reliability. In order to minimize code size, we propose a novel approach compiler-assisted dynamic code duplication scheme, which accepts an assembly code composed of only original instructions as input, and generates duplicated instructions at runtime with the help of encoded information attached to original instructions. Since the duplicates of original instructions are not explicitly present in the assembly code, the increase of code size due to the duplicated instructions can be avoided in the proposed scheme. Lastly, the third observation is that, to cope with soft errors similarly to the second observation, a recently proposed software-based technique with TMR (Triple Modular Redundancy) implemented on coarse-grained reconfigurable architectures (CGRA) incurs the increase of configuration size, which is corresponding to the code size of CGRA, and thus extreme overheads in terms of runtime and energy consumption mainly due to expensive voting mechanisms for the outputs from the triplication of every operation. To reduce the expensive performance overhead due to the large configuration from the validation mechanism, we propose selective validation mechanisms for efficient modular redundancy techniques in the datapath on CGRA. The proposed techniques selectively validate the results at synchronous operations rather than every operation.Abstract i Chapter 1 Introduction 1 1.1 Instruction Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 The causes of code size increase . . . . . . . . . . . . . . . . . . . . 2 1.2.1 Instruction Bit-width in VLIW Architectures . . . . . . . . . 2 1.2.2 Instruction Redundancy . . . . . . . . . . . . . . . . . . . . 3 Chapter 2 Reducing Instruction Bit-width with Dynamic Implied Addressing Mode (DIAM) 7 2.1 Conceptual View . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2 Architecture Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.2.1 ISA Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.2.2 Remote Operand Array Buffer . . . . . . . . . . . . . . . . . 15 2.2.3 Microarchitecture . . . . . . . . . . . . . . . . . . . . . . . . 17 2.3 Compiler Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.3.1 16-bit Instruction Generation . . . . . . . . . . . . . . . . . . 24 2.3.2 DDG Construction & Scheduling . . . . . . . . . . . . . . . 26 2.4 VLES(Variable Length Execution Set) Architecture with a Reduced Bit-width Instruction Set . . . . . . . . . . . . . . . . . . . . . . . . 29 2.4.1 Architecture Design . . . . . . . . . . . . . . . . . . . . . . 30 2.4.2 Compiler Support . . . . . . . . . . . . . . . . . . . . . . . . 34 2.5 Experiments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 2.5.1 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 2.5.2 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 2.5.3 Sensitivity Analysis . . . . . . . . . . . . . . . . . . . . . . 48 2.6 Related Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Chapter 3 Compiler-assisted Dynamic Code Duplication Scheme for Soft Error Resilient VLIW Architectures 53 3.1 Related Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 3.2 Compiler-assisted Dynamic Code Duplication . . . . . . . . . . . . . 58 3.2.1 ISA Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 3.2.2 Modified Fetch Stage . . . . . . . . . . . . . . . . . . . . . . 62 3.3 Compilation Techniques . . . . . . . . . . . . . . . . . . . . . . . . 66 3.3.1 Static Code Duplication Algorithm . . . . . . . . . . . . . . 67 3.3.2 Vulnerability-aware Duplication Algorithm . . . . . . . . . . 68 3.4 Experiments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 3.4.1 Experimental Setup . . . . . . . . . . . . . . . . . . . . . . . 71 3.4.2 Effectiveness of Compiler-assisted Dynamic Code Duplication 73 3.4.3 Effectiveness of Vulnerability-aware Duplication Algorithm . 77 Chapter 4 Selective Validation Techniques for Robust CGRAs against Soft Errors 85 4.1 Related Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 4.2 Motivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 4.3 Our Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 4.3.1 Selective Validation Mechanism . . . . . . . . . . . . . . . . 91 4.3.2 Compilation Flow and Performance Analysis . . . . . . . . . 92 4.3.3 Fault Coverage Analysis . . . . . . . . . . . . . . . . . . . . 96 4.3.4 Our Optimization - Minimizing Store Operation . . . . . . . . 97 4.4 Experiments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 4.4.1 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 4.4.2 Experimental Results . . . . . . . . . . . . . . . . . . . . . . 100 Chapter 5 Conculsion 110 초록 122Docto

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

A Survey and Comparative Study of Hard and Soft Real-time Dynamic Resource Allocation Strategies for Multi/Many-core Systems

Multi-/many-core systems are envisioned to satisfy the ever-increasing performance requirements of complex applications in various domains such as embedded and high-performance computing. Such systems need to cater to increasingly dynamic workloads, requiring efficient dynamic resource allocation strategies to satisfy hard or soft real-time constraints. This article provides an extensive survey of hard and soft real-time dynamic resource allocation strategies proposed since the mid-1990s and highlights the emerging trends for multi-/many-core systems. The survey covers a taxonomy of the resource allocation strategies and considers their various optimization objectives, which have been used to provide comprehensive comparison. The strategies employ various principles, such as market and biological concepts, to perform the optimizations. The trend followed by the resource allocation strategies, open research challenges, and likely emerging research directions have also been provided

Integrated support for Adaptivity and Fault-tolerance in MPSoCs

The technology improvement and the adoption of more and more complex applications in consumer electronics are forcing a rapid increase in the complexity of multiprocessor systems on chip (MPSoCs). Following this trend, MPSoCs are becoming increasingly dynamic and adaptive, for several reasons. One of these is that applications are getting intrinsically dynamic. Another reason is that the workload on emerging MPSoCs cannot be predicted because modern systems are open to new incoming applications at run-time. A third reason which calls for adaptivity is the decreasing component reliability associated with technology scaling. Components below the 32-nm node are more inclined to temporal or even permanent faults. In case of a malfunctioning system component, the rest of the system is supposed to take over its tasks. Thus, the system adaptivity goal shall influence several de- sign decisions, that have been listed below: 1) The applications should be specified such that system adaptivity can be easily supported. To this end, we consider Polyhedral Process Networks (PPNs) as model of computation to specify applications. PPNs are composed by concurrent and autonomous processes that communicate between each other using bounded FIFO channels. Moreover, in PPNs the control is completely distributed, as well as the memories. This represents a good match with the emerging MPSoC architectures, in which processing elements and memories are usually distributed. Most importantly, the simple operational semantics of PPNs allows for an easy adoption of system adaptivity mechanisms. 2) The hardware platform should guarantee the flexibility that adaptivity mechanisms require. Networks-on-Chip (NoCs) are emerging communication infrastructures for MPSoCs that, among many other advantages, allow for system adaptivity. This is because NoCs are generic, since the same platformcan be used to run different applications, or to run the same application with different mapping of processes. However, there is a mismatch between the generic structure of the NoCs and the semantics of the PPN model. Therefore, in this thesis we investigate and propose several communication approaches to overcome this mismatch. 3) The system must be able to change the process mapping at run-time, using process migration. To this end, a process migration mechanism has been proposed and evaluated. This mechanism takes into account specific requirements of the embedded domain such as predictability and efficiency. To face the problem of graceful degradation of the system, we enriched the MADNESS NoC platform by adding fault tolerance support at both software and hardware level. The proposed process migration mechanism can be exploited to cope with permanent faults by migrating the processes running on the faulty processing element. A fast heuristic is used to determine the new mapping of the processes to tiles. The experimental results prove that the overhead in terms of execution time, due to the execution time of the remapping heuristic, together with the actual process migration, is almost negligible compared to the execution time of the whole application. This means that the proposed approach allows the system to change its performance metrics and to react to faults without a substantial impact on the user experience