8 research outputs found

    Design and Analysis of Medium Access Control Protocols for Broadband Wireless Networks

    Get PDF
    The next-generation wireless networks are expected to integrate diverse network architectures and various wireless access technologies to provide a robust solution for ubiquitous broadband wireless access, such as wireless local area networks (WLANs), Ultra-Wideband (UWB), and millimeter-wave (mmWave) based wireless personal area networks (WPANs), etc. To enhance the spectral efficiency and link reliability, smart antenna systems have been proposed as a promising candidate for future broadband access networks. To effectively exploit the increased capabilities of the emerging wireless networks, the different network characteristics and the underlying physical layer features need to be considered in the medium access control (MAC) design, which plays a critical role in providing efficient and fair resource sharing among multiple users. In this thesis, we comprehensively investigate the MAC design in both single- and multi-hop broadband wireless networks, with and without infrastructure support. We first develop mathematical models to identify the performance bottlenecks and constraints in the design and operation of existing MAC. We then use a cross-layer approach to mitigate the identified bottleneck problems. Finally, by evaluating the performance of the proposed protocols with analytical models and extensive simulations, we determine the optimal protocol parameters to maximize the network performance. In specific, a generic analytical framework is developed for capacity study of an IEEE 802.11 WLAN in support of non-persistent asymmetric traffic flows. The analysis can be applied for effective admission control to guarantee the quality of service (QoS) performance of multimedia applications. As the access point (AP) becomes the bottleneck in an infrastructure based WLAN, we explore the multiple-input multiple-output (MIMO) capability in the future IEEE 802.11n WLANs and propose a MIMO-aware multi-user (MU) MAC. By exploiting the multi-user degree of freedom in a MIMO system to allow the AP to communicate with multiple users in the downlink simultaneously, the proposed MU MAC can minimize the AP-bottleneck effect and significantly improve the network capacity. Other enhanced MAC mechanisms, e.g., frame aggregation and bidirectional transmissions, are also studied. Furthermore, different from a narrowband system where simultaneous transmissions by nearby neighbors collide with each other, wideband system can support multiple concurrent transmissions if the multi-user interference can be properly managed. Taking advantage of the salient features of UWB and mmWave communications, we propose an exclusive region (ER) based MAC protocol to exploit the spatial multiplexing gain of centralized UWB and mmWave based wireless networks. Moreover, instead of studying the asymptotic capacity bounds of arbitrary networks which may be too loose to be useful in realistic networks, we derive the expected capacity or transport capacity of UWB and mmWave based networks with random topology. The analysis reveals the main factors affecting the network (transport) capacity, and how to determine the best protocol parameters to maximize the network capacity. In addition, due to limited transmission range, multi-hop relay is necessary to extend the communication coverage of UWB networks. A simple, scalable, and distributed UWB MAC protocol is crucial for efficiently utilizing the large bandwidth of UWB channels and enabling numerous new applications cost-effectively. To address this issue, we further design a distributed asynchronous ER based MAC for multi-hop UWB networks and derive the optimal ER size towards the maximum network throughput. The proposed MAC can significantly improve both network throughput and fairness performance, while the throughput and fairness are usually treated as a tradeoff in other MAC protocols

    Multi-hop Transmission in Millimeter Wave WPAN with Directional Antenna

    Get PDF
    Millimeter-wave (mmWave) communications is a promising enabling technology for high rate (Giga-bit) multimedia applications. However, because oxygen absorption peaks at 60 GHz, mmWave signal power degrades significantly over long distances. Therefore, a traffic flow transmitting over multiple short hops is preferred to improve the flow throughput. In this thesis, we first design a hop selection metric for the piconet controller (PNC) to select appropriate relay hops for a traffic flow, aiming to improve the flow throughput and balance the traffic loads across the network. We then propose a multi-hop concurrent transmission (MHCT) scheme to exploit the spatial diversity of the mmWave WPAN by allowing multiple communication links to transmit simultaneously. By deriving the probability that two links can transmit simultaneously as a function of link length, the MHCT scheme is capable of improving spatial multiplexing gain in comparison with the single hop concurrent transmission (SHCT) scheme. We theoretically demonstrate that by properly breaking a single long hop into multiple short hops, the time resource can be utilized more efficiently, thus supporting more traffic flows in the network within the same time interval. In addition, the per-flow throughput is obtained analytically. Extensive simulations are conducted to validate the analysis and demonstrate that the proposed MHCT scheme can significantly improve the average traffic flow throughput

    Design of medium access control techniques for cooperative wireless networks

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    Terahertz Communications and Sensing for 6G and Beyond: A Comprehensive View

    Full text link
    The next-generation wireless technologies, commonly referred to as the sixth generation (6G), are envisioned to support extreme communications capacity and in particular disruption in the network sensing capabilities. The terahertz (THz) band is one potential enabler for those due to the enormous unused frequency bands and the high spatial resolution enabled by both short wavelengths and bandwidths. Different from earlier surveys, this paper presents a comprehensive treatment and technology survey on THz communications and sensing in terms of the advantages, applications, propagation characterization, channel modeling, measurement campaigns, antennas, transceiver devices, beamforming, networking, the integration of communications and sensing, and experimental testbeds. Starting from the motivation and use cases, we survey the development and historical perspective of THz communications and sensing with the anticipated 6G requirements. We explore the radio propagation, channel modeling, and measurements for THz band. The transceiver requirements, architectures, technological challenges, and approaches together with means to compensate for the high propagation losses by appropriate antenna and beamforming solutions. We survey also several system technologies required by or beneficial for THz systems. The synergistic design of sensing and communications is explored with depth. Practical trials, demonstrations, and experiments are also summarized. The paper gives a holistic view of the current state of the art and highlights the issues and challenges that are open for further research towards 6G.Comment: 55 pages, 10 figures, 8 tables, submitted to IEEE Communications Surveys & Tutorial

    A high bit rate flexible MAC protocol for monitoring applications using 60ghz radio technology

    Get PDF
    In recent years there has been a growing trend in optical wireless convergence. One particular aspect of this is 60 GHz radio-over-fiber technology. It is intended for use in wireless personal area networks. However, we think that the same technology could be used for monitoring applications in the indoor environment. It could be used to detect emergency situations or to detect intruders. We shall examine reasons why this choice might be a suitable one. We shall then propose a MAC layer protocol to accomplish this task. Since in case of emergency we might require to obtain data from only one node for an extended duration, flexibility in implementation is required. We shall develop an adaptive MAC protocol where this would be possible. We accomplish this by including two protocol modes called the Icarus mode, which is to be used in case of an emergency and the Resync mode which is used when normality is restored. A significant problem at high frequencies is that the beam becomes increasingly narrow and behaves more in a ray like condition. This implies that particularly in an indoor environment it is possible that the beam may be accidentally blocked. In this case the node must be able shift the beam in order to enable communication. We demonstrate three such strategies and offer a comparative analysis.M.S.Committee Chair: Chang, Gee-Kung; Committee Member: Barry , John; Committee Member: Gaylord, To
    corecore