Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey

In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner

Técnicas de transmissão e recepção para sistemas MIMO heterogéneos na banda das ondas milimétricas

Mestrado em Engenharia Eletrónica e TelecomunicaçõesCom o crescimento dos dispositivos de comunicações móveis e de serviços de banda larga, os requisitos do sistema tornam-se cada vez mais exigentes. O LTE-Advanced apresenta um melhoramento progressivo relativamente ao seu antecessor LTE, introduzindo redes heterogéneas, que têm vindo provar constituir uma solução sólida para melhorar tanto a capacidade, como a cobertura da rede. Quanto à implementação do 5G, será necessário um salto disruptivo na tecnologia, que permita novas possibilidades, tal como a de conectar pessoas e coisas. Para tornar isso possível, é necessário investigar e testar novas tecnologias. MIMO massivo e comunicações em ondas milimétricas são algumas das tecnologias que têm vindo a demonstrar resultados com potencial, tais como o aumento da capacidade e da eficiência espectral. No entanto, devido às características da propagação de ondas milimétricas, a existência de cenários com redes heterogéneas ultradensas é uma possibilidade. Ao se considerar cenários ultradensos com um número massivo de utilizadores, o sistema fica limitado devido à interferência, mesmo operando na banda das ondas milimétricas. Como tal, é de extrema importância o desenvolvimento de técnicas que mitiguem essa interferência. Nesta dissertação, propõe-se uma arquitetura de baixa complexidade para um transmissor e um recetor a operarem no sentido ascendente, numa rede heterogénea ultradensa. Nesta arquitetura são aplicadas tecnologias como MIMO massivo, ondas milimétricas e técnicas de beamforming, com o intuito de mitigar a interferência entre células. Usando a probabilidade de erro de bit como métrica de performance, os resultados mostram que a arquitetura proposta consegue remover a interferência eficientemente, alcançando resultados próximos de uma arquitetura completamente digital.With the constant increase of mobile communication devices and broadband services, the system requirements are getting more demanding. Long Term Evolution (LTE) Advanced comes as a progressive enhancement to its predecessor LTE, introducing heterogeneous networks (HetNets), which have proven to be great solutions to improve both capacity and coverage. As for 5G, it takes more of a disruptive step, enabling new possibilities, such as connecting people and things. To enable such a step, new technologies and techniques need to be researched and tested. Massive Multiple-Input Multiple-Output (MIMO) and millimeter wave (mmWave) communications are two of such technologies, as they show promising results such as increased capacity and spectral efficiency. However, due to the mmWave propagation constraints, the existence of ultra-dense HetNet scenarios may be a possibility. When considering ultra-dense scenarios with a massive number of users, the system becomes interference-limited, even using mmWave band. As such, the design of interference mitigation techniques that deal with both inter and intra-tier interference are of the utmost importance. In this dissertation, a low complexity analog-digital hybrid architecture for both the transmitter and receiver in the uplink scenario is proposed. It is designed for an ultra-dense heterogeneous system and employing massive MIMO, mmWave and beamforming techniques in order to mitigate both intra- and inter-tier interference. Considering the Bit Error Rate (BER) as the performance metric, the results show that the proposed architecture efficiently removes both inter- and intra-tier interferences, achieving a result close to its fully digital counterpart

Potentzia domeinuko NOMA 5G sareetarako eta haratago

Tesis inglés 268 p. -- Tesis euskera 274 p.During the last decade, the amount of data carried over wireless networks has grown exponentially. Several reasons have led to this situation, but the most influential ones are the massive deployment of devices connected to the network and the constant evolution in the services offered. In this context, 5G targets the correct implementation of every application integrated into the use cases. Nevertheless, the biggest challenge to make ITU-R defined cases (eMBB, URLLC and mMTC) a reality is the improvement in spectral efficiency. Therefore, in this thesis, a combination of two mechanisms is proposed to improve spectral efficiency: Non-Orthogonal Multiple Access (NOMA) techniques and Radio Resource Management (RRM) schemes. Specifically, NOMA transmits simultaneously several layered data flows so that the whole bandwidth is used throughout the entire time to deliver more than one service simultaneously. Then, RRM schemes provide efficient management and distribution of radio resources among network users. Although NOMA techniques and RRM schemes can be very advantageous in all use cases, this thesis focuses on making contributions in eMBB and URLLC environments and proposing solutions to communications that are expected to be relevant in 6G

Nonorthogonal Multiple Access for 5G and Beyond

This work was supported in part by the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/N029720/1 and Grant EP/N029720/2. The work of L. Hanzo was supported by the ERC Advanced Fellow Grant Beam-me-up

Radio-Communications Architectures

Wireless communications, i.e. radio-communications, are widely used for our different daily needs. Examples are numerous and standard names like BLUETOOTH, WiFI, WiMAX, UMTS, GSM and, more recently, LTE are well-known [Baudoin et al. 2007]. General applications in the RFID or UWB contexts are the subject of many papers. This chapter presents radio-frequency (RF) communication systems architecture for mobile, wireless local area networks (WLAN) and connectivity terminals. An important aspect of today's applications is the data rate increase, especially in connectivity standards like WiFI and WiMAX, because the user demands high Quality of Service (QoS). To increase the data rate we tend to use wideband or multi-standard architecture. The concept of software radio includes a self-reconfigurable radio link and is described here on its RF aspects. The term multi-radio is preferred. This chapter focuses on the transmitter, yet some considerations about the receiver are given. An important aspect of the architecture is that a transceiver is built with respect to the radio-communications signals. We classify them in section 2 by differentiating Continuous Wave (CW) and Impulse Radio (IR) systems. Section 3 is the technical background one has to consider for actual applications. Section 4 summarizes state-of-the-art high data rate architectures and the latest research in multi-radio systems. In section 5, IR architectures for Ultra Wide Band (UWB) systems complete this overview; we will also underline the coexistence and compatibility challenges between CW and IR systems