Technology Implications of UWB on Wireless Sensor Network-A detailed Survey

In today’s high tech “SMART” world sensor based networks are widely used. The main challenge with wireless-based sensor networks is the underneath physical layer. In this survey, we have identified core obstacles of wireless sensor network when UWB is used at PHY layer. This research was done using a systematic approach to assess UWB’s effectiveness (for WSN) based on information taken from various research papers, books, technical surveys and articles. Our aim is to measure the UWB’s effectiveness for WSN and analyze the different obstacles allied with its implementation. Starting from existing solutions to proposed theories. Here we have focused only on the core concerns, e.g. spectrum, interference, synchronization etc.Our research concludes that despite all the bottlenecks and challenges, UWB’s efficient capabilities makes it an attractive PHY layer scheme for the WSN, provided we can control interference and energy problems. This survey gives a fresh start to the researchers and prototype designers to understand the technological concerns associated with UWB’s implementatio

A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

Ultra-Wideband Secure Communications and Direct RF Sampling Transceivers

Larger wireless device bandwidth results in new capabilities in terms of higher data rates and security. The 5G evolution is focus on exploiting larger bandwidths for higher though-puts. Interference and co-existence issues can also be addressed by the larger bandwidth in the 5G and 6G evolution. This dissertation introduces of a novel Ultra-wideband (UWB) Code Division Multiple Access (CDMA) technique to exploit the largest bandwidth available in the upcoming wireless connectivity scenarios. The dissertation addresses interference immunity, secure communication at the physical layer and longer distance communication due to increased receiver sensitivity. The dissertation presents the design, workflow, simulations, hardware prototypes and experimental measurements to demonstrate the benefits of wideband Code-Division-Multiple-Access. Specifically, a description of each of the hardware and software stages is presented along with simulations of different scenarios using a test-bench and open-field measurements. The measurements provided experimental validation carried out to demonstrate the interference mitigation capabilities. In addition, Direct RF sampling techniques are employed to handle the larger bandwidth and avoid analog components. Additionally, a transmit and receive chain is designed and implemented at 28 GHz to provide a proof-of-concept for future 5G applications. The proposed wideband transceiver is also used to demonstrate higher accuracy direction finding, as much as 10 times improvement

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

Bio-Inspired Optimization of Ultra-Wideband Patch Antennas Using Graphics Processing Unit Acceleration

Ultra-wideband (UWB) wireless systems have recently gained considerable attention as effective communications platforms with the properties of low power and high data rates. Applications of UWB such as wireless USB put size constraints on the antenna, however, which can be very dicult to meet using typical narrow band antenna designs. The aim of this thesis is to show how bio-inspired evolutionary optimization algorithms, in particular genetic algorithm (GA), particle swarm optimization (PSO) and biogeography-based optimization (BBO) can produce novel UWB planar patch antenna designs that meet a size constraint of a 10 mm 10 mm patch. Each potential antenna design is evaluated with the nite dierence time domain (FDTD) technique, which is accurate but time-consuming. Another aspect of this thesis is the modication of FDTD to run on a graphics processing unit (GPU) to obtain nearly a 20 speedup. With the combination of GA, PSO, BBO and GPU-accelerated FDTD, three novel antenna designs are produced that meet the size and bandwidth requirements applicable to UWB wireless USB system

State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201

Narrowband IoT: from the end device to the cloud. An experimental end-to-end study

This thesis is about a novel study and experimentation of a Cloud IoT application, communicating over a NB-IoT Italian network. So far there no been presented studies, which are about the interactions between the NB-IoT network and the cloud. This thesis not only fill this gap but also shows the use of Cognitive Services to interact, through the human voice, with the IoT application. Compared with other types of mobile networks, NB-IoT is the best choice

Design and Analysis of Integrating Antennas for UWB and Cognitive Radio Applications

The increasing demand for improvement and organization of new services has impact the hard ware design method including radio frequency front end, antennas especially in the portable devices. Hence, novel arrangement that are multimode, multi band, low cost, low profile, and simple to integrate into the highlight compact device are needed. Integrating wideband and narrow band antennas presented for various wireless applications. The integration idea is based on the sharing few areas of the one antenna between the other antennas. In this work different antennas are presented for ultra-wide band and cognitive radio applications. The UWB is a short range radio communication that perform high speed communication with rates more than 100 Mbps. The federal communication committee (FCC) defined the UWB range from 3.1GHz to 10.6 GHz for commercial usage. The challenge is to integrate two antennas in a limited space and provide good isolation exist between the antenna ports. Microstrip antennas integrated with DRA are presented cognitive radio applications. The DRA antennas for UWB applications are presented. The DRA antenna with band notch are presented for WLAN applications. First, a new semicircular- semi hexagon microstrip antenna is integrated with cylindrical DRA is proposed for UWB and cognitive radio applications. The proposed antenna placed on a 39mm×38mm×1.6mm fiber glass rein forced epoxy (FR4) dielectric substrate it covers the frequency range from (2.58 GHz to 14GHz) . The cylindrical DRA is aperture fed used for narrow band application. It covers the frequency range from 10.07GHz to 11.38 GHz. The design provide greatest isolation between the two antenna ports achieved. Dielectric resonator antenna (DRA) are having wider band width, low profile, light weight, low conductor loss, low dissipation loss and wider bandwidth compare microstrip antennas. So the DRA antennas are designed for UWB applications