5,061 research outputs found

    Exploitation of quasi-orthogonal space time block codes in virtual antenna arrays: part I - theoretical capacity and throughput gains

    Get PDF
    A full-rate and full-diversity closed-loop quasi-orthogonal space time block coding scheme pioneered by Toker, Lambotharan and Chambers is proposed for application in virtual antenna arrays. The theoretical capacity and throughput gains are evaluated as a function of signal-to-noise ratio. It is shown that the scheme has particular benefits in both ergodic and non-ergodic channel environments, and outperforms virtual antenna arrays based solely upon conventional orthogonal space time block codes

    Exploitation of quasi-orthogonal space time block codes in virtual antenna arrays: part II Monte Carlo-based throughput evaluation

    Get PDF
    A full rate and full diversity closed-loop quasi-orthogonal space time block coding scheme due to Toker, Lambotharan and Chambers is proposed for application in virtual antenna arrays. The performance gain is achieved through closed-loop operation involving feedback of phase rotation angle(s) calculated from channel state information (CSI) to the transmitter array. Throughput performance of the proposed scheme, with and without power optimisation, is investigated through Monte Carlo simulation with QPSK constellation signals. The results confirm the improvement in throughput performance over orthogonal space time block codes

    A universal space-time architecture for multiple-antenna aided systems

    No full text
    In this tutorial, we first review the family of conventional multiple-antenna techniques, and then we provide a general overview of the recent concept of the powerful Multiple-Input Multiple-Output (MIMO) family based on a universal Space-Time Shift Keying (STSK) philosophy. When appropriately configured, the proposed STSK scheme has the potential of outperforming conventional MIMO arrangements

    Interference-Mitigating Waveform Design for Next-Generation Wireless Systems

    No full text
    A brief historical perspective of the evolution of waveform designs employed in consecutive generations of wireless communications systems is provided, highlighting the range of often conflicting demands on the various waveform characteristics. As the culmination of recent advances in the field the underlying benefits of various Multiple Input Multiple Output (MIMO) schemes are highlighted and exemplified. As an integral part of the appropriate waveform design, cognizance is given to the particular choice of the duplexing scheme used for supporting full-duplex communications and it is demonstrated that Time Division Duplexing (TDD) is substantially outperformed by Frequency Division Duplexing (FDD), unless the TDD scheme is combined with further sophisticated scheduling, MIMOs and/or adaptive modulation/coding. It is also argued that the specific choice of the Direct-Sequence (DS) spreading codes invoked in DS-CDMA predetermines the properties of the system. It is demonstrated that a specifically designed family of spreading codes exhibits a so-called interference-free window (IFW) and hence the resultant system is capable of outperforming its standardised counterpart employing classic Orthogonal Variable Spreading Factor (OVSF) codes under realistic dispersive channel conditions, provided that the interfering multi-user and multipath components arrive within this IFW. This condition may be ensured with the aid of quasisynchronous adaptive timing advance control. However, a limitation of the system is that the number of spreading codes exhibiting a certain IFW is limited, although this problem may be mitigated with the aid of novel code design principles, employing a combination of several spreading sequences in the time-frequency and spatial-domain. The paper is concluded by quantifying the achievable user load of a UTRA-like TDD Code Division Multiple Access (CDMA) system employing Loosely Synchronized (LS) spreading codes exhibiting an IFW in comparison to that of its counterpart using OVSF codes. Both system's performance is enhanced using beamforming MIMOs

    Multifunctional MIMO systems: A combined diversity and multiplexing design perspective

    No full text
    In this treatise we investigate the design alternatives of different multiple-input multiple-output schemes while considering the attainable diversity gains, multiplexing gains, and beamforming gains. Following a brief classification of different MIMO schemes, where the different MIMO schemes are categorized as diversity techniques, multiplexing schemes, multiple access arrangements, and beamforming techniques, we introduce the family of multifunctional MIMOs. These multifunctional MIMOs are capable of combining the benefits of several MIMO schemes and hence attaining improved performance in terms of both their bit error rate as well as throughput. The family of multifunctional MIMOs combines the benefits of both space-time coding and the Bell Labs layered space-time scheme as well as those of beamforming. We also introduce the idea of layered steered space-time spreading, which combines the benefits of space-time spreading, V-BLAST, and beamforming with those of the generalized multicarrier direct sequence code-division multiple access concept. Additionally, we compare the attainable diversity, multiplexing, and beamforming gains of the different MIMO schemes in order to document the advantages of multifunctional MIMOs over conventional MIMO schemes

    Implementable Wireless Access for B3G Networks - III: Complexity Reducing Transceiver Structures

    No full text
    This article presents a comprehensive overview of some of the research conducted within Mobile VCE’s Core Wireless Access Research Programme,1 a key focus of which has naturally been on MIMO transceivers. The series of articles offers a coherent view of how the work was structured and comprises a compilation of material that has been presented in detail elsewhere (see references within the article). In this article MIMO channel measurements, analysis, and modeling, which were presented previously in the first article in this series of four, are utilized to develop compact and distributed antenna arrays. Parallel activities led to research into low-complexity MIMO single-user spacetime coding techniques, as well as SISO and MIMO multi-user CDMA-based transceivers for B3G systems. As well as feeding into the industry’s in-house research program, significant extensions of this work are now in hand, within Mobile VCE’s own core activity, aiming toward securing major improvements in delivery efficiency in future wireless systems through crosslayer operation
    corecore