Multilevel Block Coded 8-PSK Modulations Using Unequal Error Protection Codes for the Rayleigh Fading Channel

This paper introduces new block coded 8-PSK modulations with unequal error protection (UEP) capabilities for Rayleigh fading channels. The design of efficient block coded modulations (BCM) over 8-PSK signal sets, for the specific purpose of UEP, over Rayleigh fading channels is considered. UEP is desirable in communications systems where part of the source information is more important, or error sensitive, such as the transmission of coded speech and data broadcasting. The proposed block modulation codes are based on the multilevel construction of Imai and Hirakawa (1977). It is shown that the use of binary linear UEP (LUEP) codes as component codes in one or two of the encoding levels provides, in addition to superior UEP capabilities, a higher error performance, at the expense of a very modest reduction in bandwidth efficiency, with respect to conventional multilevel codes. Computer simulation results show that, over a Rayleigh fading channel, a significant improvement in the coding gain is obtained by the use of binary LUEP codes as constituent codes in the multilevel construction

On Block-Coded Modulation Using Unequal Error Protection Codes Over Rayleigh-Fading Channels

This paper considers block-coded 8-phase-shift-keying (PSK) modulations for the unequal error protection (UEP) of information transmitted over Rayleigh-fading channels. Both conventional linear block codes and linear UEP (LUEP) codes are combined with a naturally labeled 8-PSK signal set, using the multilevel construction of Imai and Hirakawa (1977). Computer simulation results are presented showing that, over Rayleigh-fading channels, it is possible to improve the coding gain for the most significant bits with the use of binary LUEP codes as constituent codes, in comparison with using conventional binary linear codes alone

Cross-layer optimization of unequal protected layered video over hierarchical modulation

Abstract-unequal protection mechanisms have been proposed at several layers in order to improve the reliability of multimedia contents, especially for video data. The paper aims at implementing a multi-layer unequal protection scheme, which is based on a Physical-Transport-Application cross-layer design. Hierarchical modulation, in the physical layer, has been demonstrated to increase the overall user capacity of a wireless communications. On the other hand, unequal erasure protection codes at the transport layer turned out to be an efficient method to protect video data generated by the application layer by exploiting their intrinsic properties. In this paper, the two techniques are jointly optimized in order to enable recovering lost data in case the protection is performed separately. We show that the cross-layer design proposed herein outperforms the performance of hierarchical modulation and unequal erasure codes taken independently

On Approaching the Ultimate Limits of Photon-Efficient and Bandwidth-Efficient Optical Communication

It is well known that ideal free-space optical communication at the quantum limit can have unbounded photon information efficiency (PIE), measured in bits per photon. High PIE comes at a price of low dimensional information efficiency (DIE), measured in bits per spatio-temporal-polarization mode. If only temporal modes are used, then DIE translates directly to bandwidth efficiency. In this paper, the DIE vs. PIE tradeoffs for known modulations and receiver structures are compared to the ultimate quantum limit, and analytic approximations are found in the limit of high PIE. This analysis shows that known structures fall short of the maximum attainable DIE by a factor that increases linearly with PIE for high PIE. The capacity of the Dolinar receiver is derived for binary coherent-state modulations and computed for the case of on-off keying (OOK). The DIE vs. PIE tradeoff for this case is improved only slightly compared to OOK with photon counting. An adaptive rule is derived for an additive local oscillator that maximizes the mutual information between a receiver and a transmitter that selects from a set of coherent states. For binary phase-shift keying (BPSK), this is shown to be equivalent to the operation of the Dolinar receiver. The Dolinar receiver is extended to make adaptive measurements on a coded sequence of coherent state symbols. Information from previous measurements is used to adjust the a priori probabilities of the next symbols. The adaptive Dolinar receiver does not improve the DIE vs. PIE tradeoff compared to independent transmission and Dolinar reception of each symbol.Comment: 10 pages, 8 figures; corrected a typo in equation 3

Trade-off between spectrum efficiency and link unavailability for hierarchical modulation in DVB-S2 systems

Broadcasting systems have to deal with channel variability in order to offer the best spectrum efficiency to the receivers. However, the transmission parameters that optimize the spectrum efficiency generally leads to a large link unavailability. In this paper, we study the performance of hierarchical and nonhierarchical modulations in terms of spectrum efficiency and link unavailability for DVB-S2 systems. Our first contribution is the design of the hierarchical 16-APSK for the DVB-S2 standard. Then we introduce the link unavailability to compare the performance of hierarchical and non-hierarchical modulations in terms of spectrum efficiency and link unavailability. The results show that hierarchical modulation is a good alternative to nonhierarchical modulation for the DVB-S2 standard

Combining Adaptive Coding and Modulation With Hierarchical Modulation in Satcom Systems

We investigate the design of a broadcast system in order to maximize throughput. This task is usually challenging due to channel variability. Forty years ago, Cover introduced and compared two schemes: time sharing and superposition coding. Even if the second scheme was proved to be optimal for some channels, modern satellite communications systems such as DVB-SH and DVB-S2 rely mainly on a time sharing strategy to optimize the throughput. They consider hierarchical modulation, a practical implementation of superposition coding, but only for unequal error protection or backward compatibility purposes. In this article, we propose to combine time sharing and hierarchical modulation together and show how this scheme can improve the performance in terms of available rate. We introduce a hierarchical 16-APSK to boost the performance of the DVB-S2 standard. We also evaluate various strategies to group the receivers in pairs when using hierarchical modulation. Finally, we show in a realistic case, based on DVB-S2, that the combined scheme can provide throughput gains greater than 10% compared to the best time sharing strategy

Numerically Optimized Uniformly Most Powerful Alphabets for Hierarchical-Decode-and-Forward Two-Way Relaying

We address the issue of the parametric performance of the Hierarchical-Decode-and-Forward (HDF) strategy in a wireless 2-way relay channel. Promising HDF, representing the concept of wireless network coding, performs well with a pre-coding strategy that requires Channel State Information (CSI) on the transceiver side. Assuming a practical case when CSI is available only on the receiver side and the channel conditions do not allow adaptive strategies, the parametrization causes significant HDF performance degradation for some modulation alphabets. Alphabets that are robust to the parametrization (denoted Uniformly Most Powerful (UMP)) have already been proposed restricting on the class of non-linear multi-dimensional frequency modulations. In this work, we focus on the general design of unrestricted UMP alphabets. We formulate an optimization problem which is solved by standard non-linear convex constrained optimization algorithms, particularly by Nelder-Mead global optimization search, which is further refined by the local interior-pointsmethod