Efficient parallel computation on multiprocessors with optical interconnection networks

This dissertation studies optical interconnection networks, their architecture, address schemes, and computation and communication capabilities. We focus on a simple but powerful optical interconnection network model - the Linear Array with Reconfigurable pipelined Bus System (LARPBS). We extend the LARPBS model to a simplified higher dimensional LAPRBS and provide a set of basic computation operations. We then study the following two groups of parallel computation problems on both one dimensional LARPBS\u27s as well as multi-dimensional LARPBS\u27s: parallel comparison problems, including sorting, merging, and selection; Boolean matrix multiplication, transitive closure and their applications to connected component problems. We implement an optimal sorting algorithm on an n-processor LARPBS. With this optimal sorting algorithm at disposal, we study the sorting problem for higher dimensional LARPBS\u27s and obtain the following results: • An optimal basic Columnsort algorithm on a 2D LARPBS. • Two optimal two-way merge sort algorithms on a 2D LARPBS. • An optimal multi-way merge sorting algorithm on a 2D LARPBS. • An optimal generalized column sort algorithm on a 2D LARPBS. • An optimal generalized column sort algorithm on a 3D LARPBS. • An optimal 5-phase sorting algorithm on a 3D LARPBS. Results for selection problems are as follows: • A constant time maximum-finding algorithm on an LARPBS. • An optimal maximum-finding algorithm on an LARPBS. • An O((log log n)2) time parallel selection algorithm on an LARPBS. • An O(k(log log n)2) time parallel multi-selection algorithm on an LARPBS. While studying the computation and communication properties of the LARPBS model, we find Boolean matrix multiplication and its applications to the graph are another set of problem that can be solved efficiently on the LARPBS. Following is a list of results we have obtained in this area. • A constant time Boolean matrix multiplication algorithm. • An O(log n)-time transitive closure algorithm. • An O(log n)-time connected components algorithm. • An O(log n)-time strongly connected components algorithm. The results provided in this dissertation show the strong computation and communication power of optical interconnection networks

Design and Analysis of Optical Interconnection Networks for Parallel Computation.

In this doctoral research, we propose several novel protocols and topologies for the interconnection of massively parallel processors. These new technologies achieve considerable improvements in system performance and structure simplicity. Currently, synchronous protocols are used in optical TDM buses. The major disadvantage of a synchronous protocol is the waste of packet slots. To offset this inherent drawback of synchronous TDM, a pipelined asynchronous TDM optical bus is proposed. The simulation results show that the performance of the proposed bus is significantly better than that of known pipelined synchronous TDM optical buses. Practically, the computation power of the plain TDM protocol is limited. Various extensions must be added to the system. In this research, a new pipelined optical TDM bus for implementing a linear array parallel computer architecture is proposed. The switches on the receiving segment of the bus can be dynamically controlled, which make the system highly reconfigurable. To build large and scalable systems, we need new network architectures that are suitable for optical interconnections. A new kind of reconfigurable bus called segmented bus is introduced to achieve reduced structure simplicity and increased concurrency. We show that parallel architectures based on segmented buses are versatile by showing that it can simulate parallel communication patterns supported by a wide variety of networks with small slowdown factors. New kinds of interconnection networks, the hypernetworks, have been proposed recently. Compared with point-to-point networks, they allow for increased resource-sharing and communication bandwidth utilization, and they are especially suitable for optical interconnects. One way to derive a hypernetwork is by finding the dual of a point-to-point network. Hypercube Q\sb{n}, where n is the dimension, is a very popular point-to-point network. It is interesting to construct hypernetworks from the dual Q\sbsp{n}{*} of hypercube of Q\sb{n}. In this research, the properties of Q\sbsp{n}{*} are investigated and a set of fundamental data communication algorithms for Q\sbsp{n}{*} are presented. The results indicate that the Q\sbsp{n}{*} hypernetwork is a useful and promising interconnection structure for high-performance parallel and distributed computing systems

Scaling Simulations of Reconfigurable Meshes.

This dissertation deals with reconfigurable bus-based models, a new type of parallel machine that uses dynamically alterable connections between processors to allow efficient communication and to perform fast computations. We focus this work on the Reconfigurable Mesh (R-Mesh), one of the most widely studied reconfigurable models. We study the ability of the R-Mesh to adapt an algorithm instance of an arbitrary size to run on a given smaller model size without significant loss of efficiency. A scaling simulation achieves this adaptation, and the simulation overhead expresses the efficiency of the simulation. We construct a scaling simulation for the Fusing-Restricted Reconfigurable Mesh (FR-Mesh), an important restriction of the R-Mesh. The overhead of this simulation depends only on the simulating machine size and not on the simulated machine size. The results of this scaling simulation extend to a variety of concurrent write rules and also translate to an improved scaling simulation of the R-Mesh itself. We present a bus linearization procedure that transforms an arbitrary non-linear bus configuration of an R-Mesh into an equivalent acyclic linear bus configuration implementable on an Linear Reconfigurable Mesh (LR-Mesh), a weaker version of the R-Mesh. This procedure gives the algorithm designer the liberty of using buses of arbitrary shape, while automatically translating the algorithm to run on a simpler platform. We illustrate our bus linearization method through two important applications. The first leads to a faster scaling simulation of the R-Mesh. The second application adapts algorithms designed for R-Meshes to run on models with pipelined optical buses. We also present a simulation of a Directional Reconfigurable Mesh (DR-Mesh) on an LR-Mesh. This simulation has a much better efficiency compared to previous work. In addition to the LR-Mesh, this simulation also runs on models that use pipelined optical buses

A fast parallel algorithm for special linear systems of equations using processor arrays with reconfigurable bus systems

A parallel algorithm using Processor Arrays with Reconfigurable Bus Systems has been designed to solve dense Symmetric Positive Definite (SPD) systems of equations Ax = b. The key content of this report is the parallelisation of the algorithm by Delosme & Ipson [8]. In order to design a parallel algorithm for PARBS, many procedures involved in [8] are handled in a slightly different way. The parallel time and processor’s complexity of each step of the algorithm is calculated. The parallel time complexity is O(n) using 2n × 2n × 5n number of Processing Elements

Efficient Molecular Dynamics Simulation on Reconfigurable Models with MultiGrid Method

In the field of biology, MD simulations are continuously used to investigate biological studies. A Molecular Dynamics (MD) system is defined by the position and momentum of particles and their interactions. The dynamics of a system can be evaluated by an N-body problem and the simulation is continued until the energy reaches equilibrium. Thus, solving the dynamics numerically and evaluating the interaction is computationally expensive even for a small number of particles in the system. We are focusing on long-ranged interactions, since the calculation time is O(N^2) for an N particle system. In this dissertation, we are proposing two research directions for the MD simulation. First, we design a new variation of Multigrid (MG) algorithm called Multi-level charge assignment (MCA) that requires O(N) time for accurate and efficient calculation of the electrostatic forces. We apply MCA and back interpolation based on the structure of molecules to enhance the accuracy of the simulation. Our second research utilizes reconfigurable models to achieve fast calculation time. We have been working on exploiting two reconfigurable models. We design FPGA-based MD simulator implementing MCA method for Xilinx Virtex-IV. It performs about 10 to 100 times faster than software implementation depending on the simulation accuracy desired. We also design fast and scalable Reconfigurable mesh (R-Mesh) algorithms for MD simulations. This work demonstrates that the large scale biological studies can be simulated in close to real time. The R-Mesh algorithms we design highlight the feasibility of these models to evaluate potentials with faster calculation times. Specifically, we develop R-Mesh algorithms for both Direct method and Multigrid method. The Direct method evaluates exact potentials and forces, but requires O(N^2) calculation time for evaluating electrostatic forces on a general purpose processor. The MG method adopts an interpolation technique to reduce calculation time to O(N) for a given accuracy. However, our R-Mesh algorithms require only O(N) or O(logN) time complexity for the Direct method on N linear R-Mesh and N¡¿N R-Mesh, respectively and O(r)+O(logM) time complexity for the Multigrid method on an X¡¿Y¡¿Z R-Mesh. r is N/M and M = X¡¿Y¡¿Z is the number of finest grid points

Static resource models for code generation of embedded processors

xii+129hlm.;24c

Solution of partial differential equations on vector and parallel computers

The present status of numerical methods for partial differential equations on vector and parallel computers was reviewed. The relevant aspects of these computers are discussed and a brief review of their development is included, with particular attention paid to those characteristics that influence algorithm selection. Both direct and iterative methods are given for elliptic equations as well as explicit and implicit methods for initial boundary value problems. The intent is to point out attractive methods as well as areas where this class of computer architecture cannot be fully utilized because of either hardware restrictions or the lack of adequate algorithms. Application areas utilizing these computers are briefly discussed

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

A mixed-signal computer architecture and its application to power system problems

Radical changes are taking place in the landscape of modern power systems. This massive shift in the way the system is designed and operated has been termed the advent of the ``smart grid''. One of its implications is a strong market pull for faster power system analysis computing. This work is concerned in particular with transient simulation, which is one of the most demanding power system analyses. This refers to the imitation of the operation of the real-world system over time, for time scales that cover the majority of slow electromechanical transient phenomena. The general mathematical formulation of the simulation problem includes a set of non-linear differential algebraic equations (DAEs). In the algebraic part of this set, heavy linear algebra computations are included, which are related to the admittance matrix of the topology. These computations are a critical factor to the overall performance of a transient simulator. This work proposes the use of analog electronic computing as a means of exceeding the performance barriers of conventional digital computers for the linear algebra operations. Analog computing is integrated in the frame of a power system transient simulator yielding significant computational performance benefits to the latter. Two hybrid, analog and digital computers are presented. The first prototype has been implemented using reconfigurable hardware. In its core, analog computing is used for linear algebra operations, while pipelined digital resources on a field programmable gate array (FPGA) handle all remaining computations. The properties of the analog hardware are thoroughly examined, with special attention to accuracy and timing. The application of the platform to the transient analysis of power system dynamics showed a speedup of two orders of magnitude against conventional software solutions. The second prototype is proposed as a future conceptual architecture that would overcome the limitations of the already implemented hardware, while retaining its virtues. The design space of this future architecture has been thoroughly explored, with the help of a software emulator. For one possible suggested implementation, speedups of four orders of magnitude against software solvers have been observed for the linear algebra operations