An Iterative Approach for Collision Feee Routing and Scheduling in Multirobot Stations

This work is inspired by the problem of planning sequences of operations, as welding, in car manufacturing stations where multiple industrial robots cooperate. The goal is to minimize the station cycle time, \emph{i.e.} the time it takes for the last robot to finish its cycle. This is done by dispatching the tasks among the robots, and by routing and scheduling the robots in a collision-free way, such that they perform all predefined tasks. We propose an iterative and decoupled approach in order to cope with the high complexity of the problem. First, collisions among robots are neglected, leading to a min-max Multiple Generalized Traveling Salesman Problem (MGTSP). Then, when the sets of robot loads have been obtained and fixed, we sequence and schedule their tasks, with the aim to avoid conflicts. The first problem (min-max MGTSP) is solved by an exact branch and bound method, where different lower bounds are presented by combining the solutions of a min-max set partitioning problem and of a Generalized Traveling Salesman Problem (GTSP). The second problem is approached by assuming that robots move synchronously: a novel transformation of this synchronous problem into a GTSP is presented. Eventually, in order to provide complete robot solutions, we include path planning functionalities, allowing the robots to avoid collisions with the static environment and among themselves. These steps are iterated until a satisfying solution is obtained. Experimental results are shown for both problems and for their combination. We even show the results of the iterative method, applied to an industrial test case adapted from a stud welding station in a car manufacturing line

Energy and Route Optimization of Moving Devices

This thesis highlights our efforts in energy and route optimization of moving devices. We have focused on three categories of such devices; industrial robots in a multi-robot environment, generic vehicles in a vehicle routing problem (VRP) context, automatedguided vehicles (AGVs) in a large-scale flexible manufacturing system (FMS). In the first category, the aim is to develop a non-intrusive energy optimization technique, based on a given set of paths and sequences of operations, such that the original cycle time is not exceeded. We develop an optimization procedure based on a mathematical programming model that aims to minimize the energy consumption and peak power. Our technique has several advantages. It is non-intrusive, i.e. it requires limited changes in the robot program and can be implemented easily. Moreover,it is model-free, in the sense that no particular, and perhaps secret, parameter or dynamic model is required. Furthermore, the optimization can be done offline, within seconds using a generic solver. Through careful experiments, we have shown that it is possible to reduce energy and peak-power up to about 30% and 50% respectively. The second category of moving devices comprises of generic vehicles in a VRP context. We have developed a hybrid optimization approach that integrates a distributed algorithm based on a gossip protocol with a column generation (CG) algorithm, which manages to solve the tested problems faster than the CG algorithm alone. The algorithm is developed for a VRP variation including time windows (VRPTW), which is meant to model the task of scheduling and routing of caregivers in the context of home healthcare routing and scheduling problems (HHRSPs). Moreover,the developed algorithm can easily be parallelized to further increase its efficiency. The last category deals with AGVs. The choice of AGVs was not arbitrary; by design, we decided to transfer our knowledge of energy optimization and routing algorithms to a class of moving devices in which both techniques are of interest. Initially, we improve an existing method of conflict-free AGV scheduling and routing, such that the new algorithm can manage larger problems. A heuristic version of the algorithm manages to solve the problem instances in a reasonable amount of time. Later, we develop strategies to reduce the energy consumption. The study is carried out using an AGV system installed at Volvo Cars. The results are promising; (1)the algorithm reduces performance measures such as makespan up to 50%, while reducing the total travelled distance of the vehicles about 14%, leading to an energy saving of roughly 14%, compared to the results obtained from the original traffic controller. (2) It is possible to reduce the cruise velocities such that more energy is saved, up to 20%, while the new makespan remains better than the original one

Human performance and strategies while solving an aircraft routing and sequencing problem: an experimental approach

As airport resources are stretched to meet increasing demand for services, effective use of ground infrastructure is increasingly critical for ensuring operational efficiency. Work in operations research has produced algorithms providing airport tower controllers with guidance on optimal timings and sequences for flight arrivals, departures, and ground movement. While such decision support systems have the potential to improve operational efficiency, they may also affect users’ mental workload, situation awareness, and task performance. This work sought to identify performance outcomes and strategies employed by human decision makers during an experimental airport ground movement control task with the goal of identifying opportunities for enhancing user-centered tower control decision support systems. To address this challenge, thirty novice participants solved a set of vehicle routing problems presented in the format of a game representing the airport ground movement task practiced by runway controllers. The games varied across two independent variables, network map layout (representing task complexity) and gameplay objective (representing task flexibility), and verbal protocol, visual protocol, task performance, workload, and task duration were collected as dependent variables. A logistic regression analysis revealed that gameplay objective and task duration significantly affected the likelihood of a participant identifying the optimal solution to a game, with the likelihood of an optimal solution increasing with longer task duration and in the less flexible objective condition. In addition, workload appeared unaffected by either independent variable, but verbal protocols and visual observations indicated that high-performing participants demonstrated a greater degree of planning and situation awareness. Through identifying human behavior during optimization problem solving, the work of tower control can be better understood, which, in turn, provides insights for developing decision support systems for ground movement management

Planning and Scheduling Optimization

Although planning and scheduling optimization have been explored in the literature for many years now, it still remains a hot topic in the current scientific research. The changing market trends, globalization, technical and technological progress, and sustainability considerations make it necessary to deal with new optimization challenges in modern manufacturing, engineering, and healthcare systems. This book provides an overview of the recent advances in different areas connected with operations research models and other applications of intelligent computing techniques used for planning and scheduling optimization. The wide range of theoretical and practical research findings reported in this book confirms that the planning and scheduling problem is a complex issue that is present in different industrial sectors and organizations and opens promising and dynamic perspectives of research and development

A Polyhedral Study of Mixed 0-1 Set

We consider a variant of the well-known single node fixed charge network flow set with constant capacities. This set arises from the relaxation of more general mixed integer sets such as lot-sizing problems with multiple suppliers. We provide a complete polyhedral characterization of the convex hull of the given set

The synergistic effect of operational research and big data analytics in greening container terminal operations: a review and future directions

Container Terminals (CTs) are continuously presented with highly interrelated, complex, and uncertain planning tasks. The ever-increasing intensity of operations at CTs in recent years has also resulted in increasing environmental concerns, and they are experiencing an unprecedented pressure to lower their emissions. Operational Research (OR), as a key player in the optimisation of the complex decision problems that arise from the quay and land side operations at CTs, has been therefore presented with new challenges and opportunities to incorporate environmental considerations into decision making and better utilise the ‘big data’ that is continuously generated from the never-stopping operations at CTs. The state-of-the-art literature on OR's incorporation of environmental considerations and its interplay with Big Data Analytics (BDA) is, however, still very much underdeveloped, fragmented, and divergent, and a guiding framework is completely missing. This paper presents a review of the most relevant developments in the field and sheds light on promising research opportunities for the better exploitation of the synergistic effect of the two disciplines in addressing CT operational problems, while incorporating uncertainty and environmental concerns efficiently. The paper finds that while OR has thus far contributed to improving the environmental performance of CTs (rather implicitly), this can be much further stepped up with more explicit incorporation of environmental considerations and better exploitation of BDA predictive modelling capabilities. New interdisciplinary research at the intersection of conventional CT optimisation problems, energy management and sizing, and net-zero technology and energy vectors adoption is also presented as a prominent line of future research

Application of lean scheduling and production control in non-repetitive manufacturing systems using intelligent agent decision support

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Lean Manufacturing (LM) is widely accepted as a world-class manufacturing paradigm, its currency and superiority are manifested in numerous recent success stories. Most lean tools including Just-in-Time (JIT) were designed for repetitive serial production systems. This resulted in a substantial stream of research which dismissed a priori the suitability of LM for non-repetitive non-serial job-shops. The extension of LM into non-repetitive production systems is opposed on the basis of the sheer complexity of applying JIT pull production control in non-repetitive systems fabricating a high variety of products. However, the application of LM in job-shops is not unexplored. Studies proposing the extension of leanness into non-repetitive production systems have promoted the modification of pull control mechanisms or reconfiguration of job-shops into cellular manufacturing systems. This thesis sought to address the shortcomings of the aforementioned approaches. The contribution of this thesis to knowledge in the field of production and operations management is threefold: Firstly, a Multi-Agent System (MAS) is designed to directly apply pull production control to a good approximation of a real-life job-shop. The scale and complexity of the developed MAS prove that the application of pull production control in non-repetitive manufacturing systems is challenging, perplex and laborious. Secondly, the thesis examines three pull production control mechanisms namely, Kanban, Base Stock and Constant Work-in-Process (CONWIP) which it enhances so as to prevent system deadlocks, an issue largely unaddressed in the relevant literature. Having successfully tested the transferability of pull production control to non-repetitive manufacturing, the third contribution of this thesis is that it uses experimental and empirical data to examine the impact of pull production control on job-shop performance. The thesis identifies issues resulting from the application of pull control in job-shops which have implications for industry practice and concludes by outlining further research that can be undertaken in this direction