62 research outputs found
Resource Management in Green Wireless Communication Networks
The development of wireless technologies has been stimulated by the ever increasing network capacity and the diversity of users' quality of service (QoS) requirements. It is widely anticipated that next-generation wireless networks should be capable of integrating wireless networks with various network architectures and wireless access technologies to provide diverse high-quality ubiquitous wireless accesses for users. However, the existing wireless network architecture may not be able to satisfy explosive wireless access request. Moreover, with the increasing awareness of environmental protection, significant growth of energy consumption caused by the massive traffic demand consequently raises the carbon emission footprint. The emerging of green energy technologies, e.g., solar panel and wind turbine, has provided a promising methodology to sustain operations and management of next-generation wireless networks by powering wireless network devices with eco-friendly green energy.
In this thesis, we propose a sustainable wireless network solution as the prototype of next-generation wireless networks to fulfill various QoS requirements of users with harvested energy from natural environments. The sustainable wireless solution aims at establishing multi-tier heterogeneous green wireless communication networks to integrate different wireless services and utilizing green energy supplies to sustain the network operations and management. The solution consists of three steps, 1) establishing conventional green wireless networks, 2) building multi-tier green wireless networks, and 3) allocating and balancing network resources.
In the first step, we focus on cost-effectively establishing single-tier green wireless networks to satisfy users' basic QoS requirements by designing efficient network planning algorithm. We formulate the minimum green macro cell BS deployment problem as an optimization problem, which aims at placing the minimum number of BSs to fulfill the basic QoS requirements by harvested energy. A preference level is defined as the guidance for efficient algorithm design to solve the minimum green macro cell BSs deployment problem. After that, we propose a heuristic algorithm, called two-phase constrained green BS placement (TCGBP) algorithm, based on Voronoi diagram. The TCGBP algorithm jointly considers the rate adaptation and power allocation to solve the formulated optimization problem. The performance is verified by extensive simulations, which demonstrate that the TCGBP algorithm can achieve the optimal solution with significantly reduced time complexity.
In the second step, we aim at efficiently constructing multi-tier green heterogeneous networks to fulfill high-end QoS requirements of users by placing green small cell BSs. We formulate the green small cell BS deployment and sub-carrier allocation problem as a mixed-integer non-linear programming (MINLP) problem, which targets at deploying the minimum number of green small cell BSs as relay nodes to further improve network capacities and provide high-quality QoS wireless services with harvested energy under the cost constraint. We propose the sub-carrier and traffic over rate (STR) metric to evaluate the contribution of deployed green small cell BSs in both energy and throughput aspects. Based on the metric,
two algorithms are designed, namely joint relay node placement and sub-carrier allocation with top-down/bottom-up (RNP-SA-t/b) algorithms. Extensive simulations demonstrate that the proposed algorithms provide simple yet efficient solutions and offer important guidelines on network planning and resource management in two-tier heterogeneous green wireless networks.
In the last step, we intend to allocate limited network resources to guarantee the balance of charging and discharging processes. Different from network planning based on statistical historical data, the design of resource allocation algorithm generally concerns relatively short-term resources management, and thus it is essential to accurately estimate the instantaneous energy charging and discharging rates of green wireless network devices. Specifically, we investigate the energy trading issues in green wireless networks, and try to maximize the profits of all cells by determining the optimal price and quantity in each energy trading transaction. Finally, we apply a two-stage leader-follower Stackelberg game to formulate the energy trading problem. By using back induction to obtain the optimal price and quantity of traded energy, we propose an optimal algorithm, called optimal profits energy trading (OPET) algorithm. Our analysis and simulation results demonstrate the optimality performance of OPET algorithm.
We believe that our research results in this dissertation can provide insightful guidance in the design of next-generation wireless communication networks with green energy. The algorithms developed in the dissertation offer practical and efficient solutions to build and optimize multi-tier heterogeneous green wireless communication networks
Optimization and Learning in Energy Efficient Cognitive Radio System
Energy efficiency and spectrum efficiency are two biggest concerns for wireless communication. The constrained power supply is always a bottleneck to the modern mobility communication system. Meanwhile, spectrum resource is extremely limited but seriously underutilized.
Cognitive radio (CR) as a promising approach could alleviate the spectrum underutilization and increase the quality of service. In contrast to traditional wireless communication systems, a distinguishing feature of cognitive radio systems is that the cognitive radios, which are typically equipped with powerful computation machinery, are capable of sensing the spectrum environment and making intelligent decisions. Moreover, the cognitive radio systems differ from traditional wireless systems that they can adapt their operating parameters, i.e. transmission power, channel, modulation according to the surrounding radio environment to explore the opportunity.
In this dissertation, the study is focused on the optimization and learning of energy efficiency in the cognitive radio system, which can be considered to better utilize both the energy and spectrum resources. Firstly, drowsy transmission, which produces optimized idle period patterns and selects the best sleep mode for each idle period between two packet transmissions through joint power management and transmission power control/rate selection, is introduced to cognitive radio transmitter. Both the optimal solution by dynamic programming and flexible solution by reinforcement learning are provided. Secondly, when cognitive radio system is benefited from the theoretically infinite but unsteady harvested energy, an innovative and flexible control framework mainly based on model predictive control is designed. The solution to combat the problems, such as the inaccurate model and myopic control policy introduced by MPC, is given. Last, after study the optimization problem for point-to-point communication, multi-objective reinforcement learning is applied to the cognitive radio network, an adaptable routing algorithm is proposed and implemented. Epidemic propagation is studied to further understand the learning process in the cognitive radio network
Recommended from our members
Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues.
The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies).
The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks.
Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications.
The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way.
The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools.
This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks.
Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research.
It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites.
The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation
Green internet of things using UAVs in B5G networks: A review of applications and strategies
Recently, Unmanned Aerial Vehicles (UAVs) present a promising advanced technology that can enhance people life quality and smartness of cities dramatically and increase overall economic efficiency. UAVs have attained a significant interest in supporting many applications such as surveillance, agriculture, communication, transportation, pollution monitoring, disaster management, public safety, healthcare, and environmental preservation. Industry 4.0 applications are conceived of intelligent things that can automatically and collaboratively improve beyond 5G (B5G). Therefore, the Internet of Things (IoT) is required to ensure collaboration between the vast multitude of things efficiently anywhere in real-world applications that are monitored in real-time. However, many IoT devices consume a significant amount of energy when transmitting the collected data from surrounding environments. Due to a drone's capability to fly closer to IoT, UAV technology plays a vital role in greening IoT by transmitting collected data to achieve a sustainable, reliable, eco-friendly Industry 4.0. This survey presents an overview of the techniques and strategies proposed recently to achieve green IoT using UAVs infrastructure for a reliable and sustainable smart world. This survey is different from other attempts in terms of concept, focus, and discussion. Finally, various use cases, challenges, and opportunities regarding green IoT using UAVs are presented.This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847577; and a research grant from Science Foundation Ireland (SFI) under Grant Number 16 / RC / 3918 (Ireland's European Structural and Investment Funds Programmes and the European Regional Development Fund 2014-2020)
Energy Efficient Core Networks with Clouds
The popularity of cloud based applications stemming from the high volume of connected mobile devices has led to a huge increase in Internet traffic. In order to enable easy access to cloud applications, infrastructure providers have invested in geographically distributed databases and servers. However, intelligent and energy efficient high capacity transport networks with near ubiquitous connectivity are needed to adequately and sustainably serve these requirements. In this thesis, network virtualisation has been identified as a potential networking paradigm that can contribute to network agility and energy efficiency improvements in core networks with clouds.
The work first introduces a new virtual network embedding core network architecture with clouds and a compute and bandwidth resource provisioning mechanism aimed at reducing power consumption in core networks and data centres. Further, quality of service measures in compute and bandwidth resource provisioning such as delay and customer location have been investigated and their impact on energy efficiency established. Data centre location optimisation for energy efficiency in virtual network embedding infrastructure has been investigated by developing a MILP model that selects optimal data centre locations in the core network. The work also introduces an optical OFDM based physical layer in virtual network embedding to optimise power consumption and optical spectrum utilization. In addition, virtual network embedding schemes aimed at profit maximization for cloud infrastructure providers as well greenhouse gas emission reduction in cloud infrastructure networks have been investigated. GreenTouch, a consortium of industrial and academic experts on energy efficiency in ICTs, has adopted the work in this thesis as one of the measures of improving energy efficiency in core networks
On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds
Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed
Routing and Mobility on IPv6 over LoWPAN
The IoT means a world-wide network of interconnected objects based on standard communication
protocols. An object in this context is a quotidian physical device augmented with
sensing/actuating, processing, storing and communication capabilities. These objects must be
able to interact with the surrounding environment where they are placed and to cooperate with
neighbouring objects in order to accomplish a common objective. The IoT objects have also the
capabilities of converting the sensed data into automated instructions and communicating them
to other objects through the communication networks, avoiding the human intervention in several
tasks. Most of IoT deployments are based on small devices with restricted computational
resources and energy constraints. For this reason, initially the scientific community did not
consider the use of IP protocol suite in this scenarios because there was the perception that it
was too heavy to the available resources on such devices. Meanwhile, the scientific community
and the industry started to rethink about the use of IP protocol suite in all IoT devices and now
it is considered as the solution to provide connectivity between the IoT devices, independently
of the Layer 2 protocol in use, and to connect them to the Internet. Despite the use of IP suite
protocol in all devices and the amount of solutions proposed, many open issues remain unsolved
in order to reach a seamless integration between the IoT and the Internet and to provide the
conditions to IoT service widespread. This thesis addressed the challenges associated with the
interconnectivity between the Internet and the IoT devices and with the security aspects of
the IoT. In the interconnectivity between the IoT devices and the Internet the problem is how
to provide valuable information to the Internet connected devices, independently of the supported
IP protocol version, without being necessary accessed directly to the IoT nodes. In order
to solve this problem, solutions based on Representational state transfer (REST) web services
and IPv4 to IPv6 dual stack transition mechanism were proposed and evaluated. The REST web
service and the transition mechanism runs only at the border router without penalizing the IoT
constrained devices. The mitigation of the effects of internal and external security attacks
minimizing the overhead imposed on the IoT devices is the security challenge addressed in this
thesis. Three different solutions were proposed. The first is a mechanism to prevent remotely
initiated transport level Denial of Service attacks that avoids the use of inefficient and hard to
manage traditional firewalls. It is based on filtering at the border router the traffic received
from the Internet and destined to the IoT network according to the conditions announced by
each IoT device. The second is a network access security framework that can be used to control
the nodes that have access to the network, based on administrative approval, and to enforce
security compliance to the authorized nodes. The third is a network admission control framework
that prevents IoT unauthorized nodes to communicate with IoT authorized nodes or with
the Internet, which drastically reduces the number of possible security attacks. The network
admission control was also exploited as a management mechanism as it can be used to manage
the network size in terms of number of nodes, making the network more manageable, increasing
its reliability and extending its lifetime.A IoT (Internet of Things) tem suscitado o interesse tanto da comunidade académica como
da indústria, uma vez que os campos de aplicação são inúmeros assim como os potenciais ganhos
que podem ser obtidos através do uso deste tipo de tecnologia. A IoT significa uma rede
global de objetos ligados entre si através de uma rede de comunicações baseada em protocolos
standard. Neste contexto, um objeto é um objeto físico do dia a dia ao qual foi adicionada a
capacidade de medir e de atuar sobre variáveis físicas, de processar e armazenar dados e de
comunicar. Estes objetos têm a capacidade de interagir com o meio ambiente envolvente e de
cooperar com outros objetos vizinhos de forma a atingirem um objetivo comum. Estes objetos
também têm a capacidade de converter os dados lidos em instruções e de as comunicar a outros
objetos através da rede de comunicações, evitando desta forma a intervenção humana em
diversas tarefas. A maior parte das concretizações de sistemas IoT são baseados em pequenos
dispositivos autónomos com restrições ao nível dos recursos computacionais e de retenção de
energia. Por esta razão, inicialmente a comunidade científica não considerou adequado o uso
da pilha protocolar IP neste tipo de dispositivos, uma vez que havia a perceção de que era muito
pesada para os recursos computacionais disponíveis. Entretanto, a comunidade científica e a
indústria retomaram a discussão acerca dos benefícios do uso da pilha protocolar em todos os
dispositivos da IoT e atualmente é considerada a solução para estabelecer a conetividade entre
os dispositivos IoT independentemente do protocolo da camada dois em uso e para os ligar à
Internet. Apesar do uso da pilha protocolar IP em todos os dispositivos e da quantidade de
soluções propostas, são vários os problemas por resolver no que concerne à integração contínua
e sem interrupções da IoT na Internet e de criar as condições para a adoção generalizada deste
tipo de tecnologias.
Esta tese versa sobre os desafios associados à integração da IoT na Internet e dos aspetos de
segurança da IoT. Relativamente à integração da IoT na Internet o problema é como fornecer
informação válida aos dispositivos ligados à Internet, independentemente da versão do protocolo
IP em uso, evitando o acesso direto aos dispositivos IoT. Para a resolução deste problema foram
propostas e avaliadas soluções baseadas em web services REST e em mecanismos de transição
IPv4 para IPv6 do tipo pilha dupla (dual stack). O web service e o mecanismo de transição são
suportados apenas no router de fronteira, sem penalizar os dispositivos IoT. No que concerne
à segurança, o problema é mitigar os efeitos dos ataques de segurança internos e externos
iniciados local e remotamente. Foram propostas três soluções diferentes, a primeira é um
mecanismo que minimiza os efeitos dos ataques de negação de serviço com origem na Internet e
que evita o uso de mecanismos de firewalls ineficientes e de gestão complexa. Este mecanismo
filtra no router de fronteira o tráfego com origem na Internet é destinado à IoT de acordo
com as condições anunciadas por cada um dos dispositivos IoT da rede. A segunda solução,
é uma framework de network admission control que controla quais os dispositivos que podem
aceder à rede com base na autorização administrativa e que aplica políticas de conformidade
relativas à segurança aos dispositivos autorizados. A terceira é um mecanismo de network
admission control para redes 6LoWPAN que evita que dispositivos não autorizados comuniquem
com outros dispositivos legítimos e com a Internet o que reduz drasticamente o número de
ataques à segurança. Este mecanismo também foi explorado como um mecanismo de gestão uma
vez que pode ser utilizado a dimensão da rede quanto ao número de dispositivos, tornando-a
mais fácil de gerir e aumentando a sua fiabilidade e o seu tempo de vida
- …