Adaptive runtime-assisted block prefetching on chip-multiprocessors

Memory stalls are a significant source of performance degradation in modern processors. Data prefetching is a widely adopted and well studied technique used to alleviate this problem. Prefetching can be performed by the hardware, or be initiated and controlled by software. Among software controlled prefetching we find a wide variety of schemes, including runtime-directed prefetching and more specifically runtime-directed block prefetching. This paper proposes a hybrid prefetching mechanism that integrates a software driven block prefetcher with existing hardware prefetching techniques. Our runtime-assisted software prefetcher brings large blocks of data on-chip with the support of a low cost hardware engine, and synergizes with existing hardware prefetchers that manage locality at a finer granularity. The runtime system that drives the prefetch engine dynamically selects which cache to prefetch to. Our evaluation on a set of scientific benchmarks obtains a maximum speed up of 32 and 10 % on average compared to a baseline with hardware prefetching only. As a result, we also achieve a reduction of up to 18 and 3 % on average in energy-to-solution.Peer ReviewedPostprint (author's final draft

Measurement, Modeling, and Characterization for Power-Aware Computing

Society’s increasing dependence on information technology has resulted in the deployment of vast compute resources. The energy costs of operating these resources coupled with environmental concerns have made power-aware computingone of the primary challenges for the IT sector. Making energy-efficient computing a rule rather than an exception requires that researchers and system designers use the right set of techniques and tools. These involve measuring,modeling, and characterizing the energy consumption of computers at varying degrees of granularity.In this thesis, we present techniques to measure power consumption of computer systems at various levels. We compare them for accuracy and sensitivityand discuss their effectiveness. We test Intel’s hardware power model for estimation accuracy and show that it is fairly accurate for estimating energy consumption when sampled at the temporal granularity of more than tens ofmilliseconds.We present a methodology to estimate per-core processor power consumption using performance counter and temperature-based power modeling and validate it across multiple platforms. We show our model exhibits negligible computationoverhead, and the median estimation errors ranges from 0.3% to 10.1% for applications from SPEC2006, SPEC-OMP and NAS benchmarks. We test the usefulness of the model in a meta-scheduler to enforce power constraint on a system.Finally, we perform a detailed performance and energy characterization of Intel’s Restricted Transactional Memory (RTM). We use TinySTM software transactional memory (STM) system to benchmark RTM’s performance against competing STM alternatives. We use microbenchmarks and STAMP benchmarksuite to compare RTM versus STM performance and energy behavior. We quantify the RTM hardware limitations that affect its success rate. We show that RTM performs better than TinySTM when working-set fits inside the cache and that RTM is better at handling high contention workloads

AN ARCHITECTURE EVALUATION AND IMPLEMENTATION OF A SOFT GPGPU FOR FPGAs

Embedded and mobile systems must be able to execute a variety of different types of code, often with minimal available hardware. Many embedded systems now come with a simple processor and an FPGA, but not more energy-hungry components, such as a GPGPU. In this dissertation we present FlexGrip, a soft architecture which allows for the execution of GPGPU code on an FPGA without the need to recompile the design. The architecture is optimized for FPGA implementation to effectively support the conditional and thread-based execution characteristics of GPGPU execution without FPGA design recompilation. This architecture supports direct CUDA compilation to a binary which is executable on the FPGA-based GPGPU. Our architecture is customizable, thus providing the FPGA designer with a selection of GPGPU cores which display performance versus area tradeoffs. This dissertation describes the FlexGrip architecture in detail and showcases the benefits by evaluating the design for a collection of five standard CUDA benchmarks which are compiled using standard GPGPU compilation tools. Speedups of 23x, on average, versus a MicroBlaze microprocessor are achieved for designs which take advantage of the conditional execution capabilities offered by FlexGrip. We also show FlexGrip can achieve an 80% average reduction of dynamic energy versus the MicroBlaze microprocessor. The dissertation furthers discussion by exploring application-customized versions of the soft GPGPU, thus exploiting the overlay architecture. We expand the architecture to multiple processors per GPGPU and optimizing away features which are not needed by certain classes of applications. These optimizations, which include the effective use of block RAMs and DSP blocks, are critical to the performance of FlexGrip. By implementing a 2 GPGPU design, we show speedups of 44x on average versus a MicroBlaze microprocessor. Application-customized versions of the soft GPGPU can be used to further reduce dynamic energy consumption by an average of 14%. To complete this thesis, we augmented a GPGPU cycle accurate simulator to emulate FlexGrip and evaluate different levels of cache design spaces. We show performance increases for select benchmarks, however, we also show that 64% and 45% of benchmarks exhibited performance decreases when L1D cache was enabled for the 1 SMP and 2 SMP configurations, and only one benchmark showed performance improvement when the L2 cache was enabled

Distributed data cache designs for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to deal with this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the L1 data cache typically remains centralized in What we call partially distributed architectures. However, as technology evolves, the relative latency of such a centralized cache will increase, leading to an important impact on performance. In this paper, we propose partitioning the L1 data cache among clusters for clustered VLIW processors. We refer to this kind of design as fully distributed processors. In particular; we propose and evaluate three different configurations: a snoop-based cache coherence scheme, a word-interleaved cache, and flexible LO-buffers managed by the compiler. For each alternative, instruction scheduling techniques targeted to cyclic code are developed. Results for the Mediabench suite'show that the performance of such fully distributed architectures is always better than the performance of a partially distributed one with the same amount of resources. In addition, the key aspects of each fully distributed configuration are explored.Peer ReviewedPostprint (published version

Heterogeneous CPU/GPU Memory Hierarchy Analysis and Optimization

In this master thesis, we propose a scheduling reordering for heterogeneous processors based on a hysteresis detector to give some fairness and speedup to the memory request threads taking advantage of the bank level parallelism at the memory system organization

Fast Key-Value Lookups with Node Tracker

Lookup operations for in-memory databases are heavily memory bound, because they often rely on pointer-chasing linked data structure traversals. They also have many branches that are hard-to-predict due to random key lookups. In this study, we show that although cache misses are the primary bottleneck for these applications, without a method for eliminating the branch mispredictions only a small fraction of the performance benefit is achieved through prefetching alone. We propose the Node Tracker (NT), a novel programmable prefetcher/pre-execution unit that is highly effective in exploiting inter key-lookup parallelism to improve single-thread performance. We extend NT with branch outcome streaming (BOS) to reduce branch mispredictions and show that this achieves an extra 3× speedup. Finally, we evaluate the NT as a pre-execution unit and demonstrate that we can further improve the performance in both single- and multi-threaded execution modes. Our results show that, on average, NT improves single-thread performance by 4.1× when used as a prefetcher; 11.9× as a prefetcher with BOS; 14.9× as a pre-execution unit and 18.8× as a pre-execution unit with BOS. Finally, with 24 cores of the latter version, we achieve a speedup of 203× and 11× over the single-core and 24-core baselines, respectively