Advanced digital modulation: Communication techniques and monolithic GaAs technology

Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case

Capacity -based parameter optimization of bandwidth constrained CPM

Continuous phase modulation (CPM) is an attractive modulation choice for bandwidth limited systems due to its small side lobes, fast spectral decay and the ability to be noncoherently detected. Furthermore, the constant envelope property of CPM permits highly power efficient amplification. The design of bit-interleaved coded continuous phase modulation is characterized by the code rate, modulation order, modulation index, and pulse shape. This dissertation outlines a methodology for determining the optimal values of these parameters under bandwidth and receiver complexity constraints. The cost function used to drive the optimization is the information-theoretic minimum ratio of energy-per-bit to noise-spectral density found by evaluating the constrained channel capacity. The capacity can be reliably estimated using Monte Carlo integration. A search for optimal parameters is conducted over a range of coded CPM parameters, bandwidth efficiencies, and channels. Results are presented for a system employing a trellis-based coherent detector. To constrain complexity and allow any modulation index to be considered, a soft output differential phase detector has also been developed.;Building upon the capacity results, extrinsic information transfer (EXIT) charts are used to analyze a system that iterates between demodulation and decoding. Convergence thresholds are determined for the iterative system for different outer convolutional codes, alphabet sizes, modulation indices and constellation mappings. These are used to identify the code and modulation parameters with the best energy efficiency at different spectral efficiencies for the AWGN channel. Finally, bit error rate curves are presented to corroborate the capacity and EXIT chart designs

Low Complexity Noncoherent Iterative Detector for Continuous Phase Modulation Systems

This paper focuses on the noncoherent iterative detection of continuous phase modulation. A class of simplified receivers based on Principal-Component-Analysis (PCA) and Exponential-Window (EW) is developed. The proposed receiver is evaluated in terms of minimum achievable Euclidean distance, simulated bit error rate and achievable capacity. The performance of the proposed receiver is discussed in the context of mismatched receiver and the equivalent Euclidean distance is derived. Analysis and numerical results reveal that the proposed algorithm can approach the coherent performance and outperforms existing algorithm in terms of complexity and performance. It is shown that the proposed receiver can significantly reduce the detection complexity while the performance is comparable with existing algorithms

Serially Concatenated Continuous Phase Modulation with SOVA Turbo Decoding

For a Serially Concatenated Continuous Phase Modulation (SCCPM) system that concatenates a rate of 1/2 Convolutional Code (CC) and an M-ary full response continuous phase modulation (CPM) signal, we design a turbo decoding scheme using the Soft Output Viterbi algorithm (SOVA) and study the system performance. A decomposition model is used in CPM to reduce the number of states and separate the continuous phase encoder (CPE) with the modulator. As a soft-input soft-output (SISO) decoding algorithm, SOVA is used to generate and update the soft information of decoded signal symbols during the iterative process for both the CPM signal and the CC. Newly generated soft information from one component decoder will be used by the other component decoder to constitute an iterative, i.e., turbo, decoding process. Simulation results show that a decoding gain of at least 1 dB can be obtained by using turbo decoding compared to that without turbo decoding

A (Simplified) Bluetooth Maximum a Posteriori Probability (Map) Receiver

In our software-defined radio project, we aim at combining two standards luetooth and HIPERLAN/2. The HIPERLAN/2 receiver requires more computational power than Bluetooth. We choose to use this computational power also for Bluetooth and look for more advanced demodulation algorithms such as a maximum a posteriori probability (MAP) receiver. The paper discusses a simplified MAP receiver for Bluetooth GFSK signals. Laurent decomposition provides an orthogonal vector space for the MAP receiver. As the first Laurent waveform contains the most energy, we have used only this waveform for our (simplified) MAP receiver. This receiver requires a E/sub b//N/sub 0/ of about 11 dB for a BER of 10/sup -3/, required by the Bluetooth standard. This value is about 6 dB better than single bit demodulators. This performance is only met if the receiver has exact knowledge of the modulation index

A Hardware Implementation of a Coherent SOQPSK-TG Demodulator for FEC Applications

This thesis presents a hardware design of a coherent demodulator for shaped offset quadrature phase shift keying, telemetry group version (SOQPSK-TG) for use in forward error correction (FEC) applications. Implementation details for data sequence detection, symbol timing synchronization, carrier phase synchronization, and block recovery are described. This decision-directed demodulator is based on maximum likelihood principles, and is efficiently implemented by the soft output Viterbi algorithm (SOVA). The design is intended for use in a field-programmable gate array (FPGA). Simulation results of the demodulator's performance in the additive white Gaussian noise channel are compared with a Matlab reference model that is known to be correct. In addition, hardware-specific parameters are presented. Finally, suggestions for future work and improvements are discussed

An Architecture for High Data Rate Very Low Frequency Communication

Very low frequency (VLF) communication is used for long range shore-to-ship broadcasting applications. This paper proposes an architecture for high data rate VLF communication using Gaussian minimum shift keying (GMSK) modulation and low delay parity check (LDPC) channel coding. Non-data aided techniques are designed and used for carrier phase synchronization, symbol timing recovery, and LDPC code frame synchronization. These require the estimation of the operative Eb/N0 for which a kurtosis based algorithm is used. Also, a method for modeling the probability density function of the received signal under the bit condition is presented in this regard. The modeling of atmospheric radio noise (ARN) that corrupts VLF signals is described and an algorithm for signal enhancement in the presence of ARN in given. The BER performance of the communication system is evaluated for bit rates of 400 bps, 600 bps, and 800 bps for communication bandwidth of ~200 Hz.Defence Science Journal, 2013, 63(1), pp.25-33, DOI:http://dx.doi.org/10.14429/dsj.63.376

Serially Concatenated Coded Continuous Phase Modulation for Aeronautical Telemetry

This thesis treats the development of bandwidth-efficient serially concatenated coded (SCC) continuous phase modulation (CPM) techniques for aeronautical telemetry. The concatenated code consists of an inner and an outer code, separated by an interleaver in most configurations, and is decoded using relatively simple near-optimum iterative decoding algorithms. CPM waveforms such as shaped-offset quadrature phase shift keying (SOQPSK) and pulse code modulation/frequency modulation (PCM/FM), which are currently used in military satellite and aeronautical telemetry standards, can be viewed as inner codes due to their recursive nature. For the outer codes, this thesis applies serially concatenated convolutional codes (SCCC), turbo-product codes (TPC) and repeat-accumulate codes (RAC) because of their large coding gains, high code rates, and because their decoding algorithms are readily implemented. High-rate codes are of special interest in aeronautical telemetry applications due to recent reductions in available spectrum and ever-increasing demands on data rates. This thesis evaluates the proposed coding schemes with a large set of numerical simulation results and makes a number of recommendations based on these results