1,272 research outputs found
Cuff-Less Methods for Blood Pressure Telemonitoring.
Blood pressure telemonitoring (BPT) is a telemedicine strategy that uses a patient\u27s self-measured blood pressure (BP) and transmits this information to healthcare providers, typically over the internet. BPT has been shown to improve BP control compared to usual care without remote monitoring. Traditionally, a cuff-based monitor with data communication capabilities has been used for BPT; however, cuff-based measurements are inconvenient and cause discomfort, which has prevented the widespread use of cuff-based monitors for BPT. The development of new technologies which allow for remote BP monitoring without the use of a cuff may aid in more extensive adoption of BPT. This would enhance patient autonomy while providing physicians with a more complete picture of their patient\u27s BP profile, potentially leading to improved BP control and better long-term clinical outcomes. This mini-review article aims to: (1) describe the fundamentals of current techniques in cuff-less BP measurement; (2) present examples of commercially available cuff-less technologies for BPT; (3) outline challenges with current methodologies; and (4) describe potential future directions in cuff-less BPT development
Mobile Personal Healthcare System for Non-Invasive, Pervasive and Continuous Blood Pressure Monitoring: A Feasibility Study
Background: Smartphone-based blood pressure (BP) monitor using photoplethysmogram (PPG) technology has emerged as a promising approach to empower users with self-monitoring for effective diagnosis and control ofhypertension (HT).
Objective: This study aimed to develop a mobile personal healthcare system for non-invasive, pervasive, and continuous estimation of BP level and variability to be user-friendly to elderly.
Methods: The proposed approach was integrated by a self-designed cuffless, calibration-free, wireless and wearable PPG-only sensor, and a native purposely-designed smartphone application using multilayer perceptron machine learning techniques from raw signals. We performed a pilot study with three elder adults (mean age 61.3 ± 1.5 years; 66% women) to test usability and accuracy of the smartphone-based BP monitor.
Results: The employed artificial neural network (ANN) model performed with high accuracy in terms of predicting the reference BP values of our validation sample (n=150). On average, our approach predicted BP measures with accuracy \u3e90% and correlations \u3e0.90 (P \u3c .0001). Bland-Altman plots showed that most of the errors for BP prediction were less than 10 mmHg.
Conclusions: With further development and validation, the proposed system could provide a cost-effective strategy to improve the quality and coverage of healthcare, particularly in rural zones, areas lacking physicians, and solitary elderly populations
Recommended from our members
A review of machine learning techniques in photoplethysmography for the non-invasive cuff-less measurement of blood pressure
Hypertension or high blood pressure is a leading cause of death throughout the world and a critical factor for increasing the risk of serious diseases, including cardiovascular diseases such as stroke and heart failure. Blood pressure is a primary vital sign that must be monitored regularly for the early detection, prevention and treatment of cardiovascular diseases. Traditional blood pressure measurement techniques are either invasive or cuff-based, which are impractical, intermittent, and uncomfortable for patients. Over the past few decades, several indirect approaches using photoplethysmogram (PPG) have been investigated, namely, pulse transit time, pulse wave velocity, pulse arrival time and pulse wave analysis, in an effort to utilise PPG for estimating blood pressure. Recent advancements in signal processing techniques, including machine learning and artificial intelligence, have also opened up exciting new horizons for PPG-based cuff less and continuous monitoring of blood pressure. Such a device will have a significant and transformative impact in monitoring patients’ vital signs, especially those at risk of cardiovascular disease. This paper provides a comprehensive review for non-invasive cuff-less blood pressure estimation using the PPG approach along with their challenges and limitations
Multimodal Photoplethysmography-Based Approaches for Improved Detection of Hypertension
Elevated blood pressure (BP) is a major cause of death, yet hypertension commonly goes undetected. Owing to its nature, it is typically asymptomatic until later in its progression when the vessel or organ structure has already been compromised. Therefore, noninvasive and continuous BP measurement methods are needed to ensure appropriate diagnosis and early management before hypertension leads to irreversible complications. Photoplethysmography (PPG) is a noninvasive technology with waveform morphologies similar to that of arterial BP waveforms, therefore attracting interest regarding its usability in BP estimation. In recent years, wearable devices incorporating PPG sensors have been proposed to improve the early diagnosis and management of hypertension. Additionally, the need for improved accuracy and convenience has led to the development of devices that incorporate multiple different biosignals with PPG. Through the addition of modalities such as an electrocardiogram, a final measure of the pulse wave velocity is derived, which has been proved to be inversely correlated to BP and to yield accurate estimations. This paper reviews and summarizes recent studies within the period 2010-2019 that combined PPG with other biosignals and offers perspectives on the strengths and weaknesses of current developments to guide future advancements in BP measurement. Our literature review reveals promising measurement accuracies and we comment on the effective combinations of modalities and success of this technology
딥러닝 기반 혈압 예측 기법
학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 윤성로.While COVID-19 is changing the world's social profile, it is expected that the telemedicine sector, which has not been activated due to low regulation and reliability, will also undergo a major change. As COVID-19 spreads in the United States, the US Department of Health \& Human Services temporarily loosens the standards for telemedicine, while enabling telemedicine using Facebook, Facebook Messenger-based video chat, Hangouts, and Skype. The expansion of the telemedicine market is expected to quickly transform the existing treatment-oriented hospital-led medical market into a digital healthcare service market focused on prevention and management through wearables, big data, and health records analysis. In this prevention and management-oriented digital healthcare service, it is very important to develop a technology that can easily monitor a person's health status. One of the vital signs that can be used for personal health monitoring is blood pressure. High BP is a common and dangerous condition. About 1 out of 3 adults in the U.S. (about 75 million people) have high BP. This common condition increases the risk of heart disease and stroke, two of the leading causes of death for Americans. High BP is called the silent killer because it often has no warning signs or symptoms, and many people are not aware they have it. For these reasons, it is important to develop a technology that can easily and conveniently check BP regularly. In biomedical data analysis, various studies are being attempted to effectively analyze by applying machine learning to biomedical big data accumulated in large quantities. However, collecting blood pressure-related data at the level of big data is very difficult and very expensive because it takes a lot of manpower and time. So in this dissertation, we proposed a three-step strategy to overcome these issues. First, we describe a BP prediction model with extraction and concentration CNN architecture, to process publicly disclosed sequential ECG and PPG dataset. Second, we evaluate the performance of the developed model by applying the developed model to privately measured data. To address the third issue, we propose the knowledge distillation method and input pre-processing method to improve the accuracy of the blood pressure prediction model. All the methods proposed in this dissertation are based on a deep convolutional neural network (CNN). Unlike other studies based on manual recognition of the features, by utilizing the advantage of deep learning which automatically extracts features, raw biomedical signals are used intact to reflect the inherent characteristics of the signals themselves.코로나 19에 의한 전 세계의 사회적 프로필 변화로, 규제와 신뢰성이 낮기 때문에 활성화 되지 않은 원격 의료 분야도 큰 변화를 겪을 것으로 예상됩니다. 코로나 19가 미국에 퍼짐에 따라 미국 보건복지부는 원격 진료의 표준을 일시적으로 완화하면서 페이스북, 페이스북 메신저 기반 화상 채팅, 행아웃, 스카이프를 사용한 원격 진료를 가능하게 했습니다. 원격의료 시장의 확장은 기존의 치료중심 병원주도의 의료시장을 웨어러블, 빅 데이터 및 건강기록 분석을 통한 예방 및 관리에 중점을 둔 디지털 의료 서비스 시장으로 빠르게 변화시킬 것으로 예상됩니다. 이러한 예방 및 관리 중심의 디지털 헬스케어 서비스에서는 사람의 건강 상태를 쉽게 모니터링 할 수 있는 기술 개발이 매우 중요한데 혈압은 개인 건강 모니터링에 사용될 수 있는 필수 징후 중 하나 입니다.
고혈압은 아주 흔하고 위험한 질환입니다. 미국 성인 3명중 1명(약 7,500만명)이 고혈압을 가지고 있습니다. 이는 미국인의 주요 사망 원인 중 두가지인 심장질환과 뇌졸중의 위험을 증가 시킵니다. 고혈압은 신체에 경고 신호나 자각 증상이 없어 많은 사람들이 자신이 고혈압인 것을 인지하지 못하기 때문에 "사일런트 킬러"라 불리웁니다. 이러한 이유로 정기적으로 쉽고 편리하게 혈압을 확인할 수 있는 기술의 개발이 매우 중요합니다. 생체의학 데이터 분석 분야에서는 머신 러닝을 대량으로 수집된 생체의학 빅 데이터에 적용하는 다양한 연구가 효과적으로 이루어지고 있습니다. 그러나 빅 데이터 수준으로 다량의 혈압 관련 데이터를 수집하는 것은 많은 전문적인 인력들이 오랜시간을 필요로 하기 때문에 매우 어렵고 비용 또한 많이 필요합니다. 따라서 본 학위논문에서는 이러한 문제를 극복하기 위한 3단계 전략을 제안했습니다.
먼저 누구나 시용할 수 있도록 공개되어 있는 심전도, 광용적맥파 데이터셋을 이용, 순차적인 심전도, 광용적맥파 신호에서 혈압을 잘 예측하도록 고안된 추출 및 농축 작업을 반복하는 함성곱 신경망 구조를 제안했습니다. 두번째로 제안된 합성곱 신경망 모델을 개인에게서 측정한 광용적맥파 신호를 이용해 제안된 함성곱 신경망 모델의 성능을 평가했습니다. 세번째로 혈압예측 모델의 정확성을 높이기 위해 지식 증류법과 입력신호 전처리 방법을 제안했습니다. 이 논문에서 제안된 모든 혈압예측 방법은 합성곱 신경망을 기반으로 합니다. 혈압 예측에 필요한 특징들을 수동으로 추출해야 하는 다른 연구들과 다르게 특징을 자동으로 추출하는 딥러닝의 장점을 활용, 아무런 처리도 하지 않은 원래 그대로의 생체 신호에서 신호 자체의 고유한 특징을 반영할 수 있습니다.1 Introduction 1
2 Background 5
2.1 Cuff-based BP measurement methods 9
2.1.1 Auscultatory method 9
2.1.2 Oscillometric method 10
2.1.3 Tonometric method 11
2.2 Biomedical signals used in cuffless BP prediction methods 13
2.2.1 Electrocardiography (ECG) 13
2.2.2 Photoplethysmography (PPG) 20
2.3 Cuffless BP measurement methods 21
2.3.1 PWV based BP prediction methods 25
2.3.2 Machine learning based pulse wave analysis methods 26
2.4 Deep learning for sequential biomedical data 30
2.4.1 Convolutional neural networks 31
2.4.2 Recurrent neural networks 32
3 End-to-end blood pressure prediction via fully convolutional networks 33
3.1 Introduction 35
3.2 Method 38
3.2.1 Data preparation 38
3.2.2 CNN based prediction model 41
3.2.3 Detailed architecture 45
3.3 Experimental results 47
3.3.1 Setup 47
3.3.2 Model evaluation & selection 48
3.3.3 Calibration-based method 51
3.3.4 Performance comparison 52
3.3.5 Verification using international standards for BP measurement grading criteria 54
3.3.6 Performance comparison by the input signal combinations 56
3.3.7 An ablation study of each architectural component of extraction-concentration blocks 58
3.3.8 Preprocessing of input signal to improve blood pressure prediction performance 59
3.4 Discussion 61
3.5 Summary 63
4 Blood pressure prediction by a smartphone sensor using fully convolutional networks 64
4.1 Introduction 66
4.2 Method 69
4.2.1 Data acquisition 71
4.2.2 Preprocessing of the PPG signals 71
4.2.3 PPG signal selection 71
4.2.4 Data preparation for CNN model training 72
4.2.5 Network architectures 72
4.3 Experimental results 75
4.3.1 Implementation details 75
4.3.2 Effect of PPG combination on BP prediction 75
4.3.3 Performance comparison with other related works 76
4.3.4 Verification using international standards for BP measurement grading criteria 77
4.3.5 Preprocessing of input signal to improve blood pressure prediction performance 79
4.4 Discussion 81
4.5 Summary 83
5 Improving accuracy of blood pressure prediction by distilling the knowledge of neural networks 84
5.1 Introduction 85
5.2 Methods 87
5.3 Experimental results 88
5.4 Discussion & Summary 89
6 Conclusion 90
6.1 Future work 92
Bibliography 93
Abstract (In Korean) 106Docto
Cuffless Single-Site Photoplethysmography for Blood Pressure Monitoring
One in three adults worldwide has hypertension, which is associated with significant morbidity and mortality. Consequently, there is a global demand for continuous and non-invasive blood pressure (BP) measurements that are convenient, easy to use, and more accurate than the currently available methods for detecting hypertension. This could easily be achieved through the integration of single-site photoplethysmography (PPG) readings into wearable devices, although improved reliability and an understanding of BP estimation accuracy are essential. This review paper focuses on understanding the features of PPG associated with BP and examines the development of this technology over the 2010-2019 period in terms of validation, sample size, diversity of subjects, and datasets used. Challenges and opportunities to move single-site PPG forward are also discussed
Predict Daily Life Stress based on Heart Rate Variability
Department of Human Factors EngineeringThe purpose of this study is to investigate the feasibility of predicting a daily mental stress level from analyzing Heart Rate Variability (HRV) by using a Photoplethysmography (PPG) sensor which is integrated in the wristband-type wearable device. In this experiment, each participant was asked to measure their own PPG signals for 30 seconds, three times a day (at noon, 6 P.M, and 10 minutes before going to sleep) for a week.
And 10 minutes before going to sleep, all participants were asked to self-evaluate their own daily mental stress level using Perceived Stress Scale (PSS). The recorded signals were transmitted and stored at each participant???s smartphone via Bluetooth Low Energy (BLE) communication by own-made mobile application.
The preprocessing procedure was used to remove PPG signal artifacts in order to make better performance for detecting each pulse peak point at PPG signal. In this preprocessing, three- level-bandpass filtering which consisted three different pass band range bandpass filters was used.
In this study, frequency domain HRV analysis feature that the ratio of low-frequency (0.04Hz ~ 0.15Hz) to high-frequency (0.15Hz ~ 0.4Hz) power value was used. In frequency domain analysis, autoregressive (AR) model was used, because this model has higher resolution than that of Fast Fourier Transform (FFT). The accuracy of this prediction was 86.35% on average of all participants. Prediction result was calculated from the leave-one-out validation. The IoT home appliances are arranged according to the result of this prediction algorithm. This arrangement is offering optimized user???s relaxation. Also, this algorithm can help acute stress disorder patients to concentrate on getting treatment.clos
Estimación robusta de la diferencia del tiempo de tránsito del pulso sanguíneo a partir de señales fotopletismográficas
En el presente trabajo se va a estudiar la posibilidad de detectar estrés mental utilizando técnicas no invasivas basadas en la señal fotopletismográfica de pulso (PPG). Para ello se pretende detectar cambios en la velocidad de pulso arterial (PWV), utilizando señales de PPG tomadas en dos puntos distintos del árbol arterial con las que poder medir el tiempo de llegada de pulso arterial a la periferia (PAT) y la diferencia de ese tiempo de llegada entre dos puntos de la periferia distintos (PTTD). Tanto el PAT como el PTTD han sido propuestas en la bibliografía como medidas influenciados por el Tiempo de Tránsito de Pulso (PTT), este último capaz de medir cambios en la dinámica cardiovascular. Sin embargo, el PTTD, al contrario que el PAT, no necesita del electrocardiograma (ECG) para ser obtenido y no está influenciado por el periodo de pre-eyección (PEP) -un intervalo de tiempo en la sístole ventricular que cambia pulso a pulso- el cual genera que el PAT pierda la relación con el PTT, dos factores importantes que aventajan al PTTD frente al PAT. Primero, se estudia de fiabilidad de los puntos fiduciales para la detección de los pulsos de la señal PPG y con ésto comprobar cuál es el método con la mayor precisión. Se demuestra mediante diversos análisis que el mejor punto para detectar los pulsos corresponde al valor de la PPG en el instante de máxima pendiente (valor máximo en la primera derivada). Resulta necesario implementar un detector de artefactos ya que el método de adquisición de la PPG es muy sensible a ellos pudiendo llegar a haber segmentos en los que la señal registrada es absolutamente inutilizable. Posteriormente, se analizan 14 voluntarios sanos sometidos a un protocolo de estrés y se realiza un test estadístico para comprobar la validez del método propuesto. Los resultados muestran que la desviación estándar de la PTTD tiene la capacidad estadística suficiente como para discernir entre estados de estrés y de relajación, para cada uno de los sujetos por separado. Además, se puede ver una tendencia descendente generalizada del descenso de la PTTD en situación de estrés con respecto a relajación. %Sin embargo, resultará necesario repetir el análisis con una muestra de señales mayor ya que se dispone de pocos sujetos en la base de datos utilizada, ya que la calidad de la señal de PPG que se registró en la frente es muy mala y hay muy pocos sujetos con los que se puede computar la PTTD. A modo de conclusión, se ha visto que la PTTD contiene información fisiológica que puede ser interesante para la detección de estrés. A su vez, también es una técnica potencialmente interesante para otros tipos de aplicaciones clínicas tales como la estimación no invasiva de la presión arterial o la evaluación de la rigidez arterial, pero se necesita estudiar la adecuación de ésta en cada escenario en particular. Además, como la PTTD se puede medir a partir de únicamente dos señales PPG, la técnica es idónea para dispositivos wearable y smartphones
- …