323 research outputs found
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
A Novel Multiobjective Cell Switch-Off Framework for Cellular Networks
Cell Switch-Off (CSO) is recognized as a promising approach to reduce the
energy consumption in next-generation cellular networks. However, CSO poses
serious challenges not only from the resource allocation perspective but also
from the implementation point of view. Indeed, CSO represents a difficult
optimization problem due to its NP-complete nature. Moreover, there are a
number of important practical limitations in the implementation of CSO schemes,
such as the need for minimizing the real-time complexity and the number of
on-off/off-on transitions and CSO-induced handovers. This article introduces a
novel approach to CSO based on multiobjective optimization that makes use of
the statistical description of the service demand (known by operators). In
addition, downlink and uplink coverage criteria are included and a comparative
analysis between different models to characterize intercell interference is
also presented to shed light on their impact on CSO. The framework
distinguishes itself from other proposals in two ways: 1) The number of
on-off/off-on transitions as well as handovers are minimized, and 2) the
computationally-heavy part of the algorithm is executed offline, which makes
its implementation feasible. The results show that the proposed scheme achieves
substantial energy savings in small cell deployments where service demand is
not uniformly distributed, without compromising the Quality-of-Service (QoS) or
requiring heavy real-time processing
Energy-efficient vertical handover parameters, classification and solutions over wireless heterogeneous networks: a comprehensive survey
In the last few decades, the popularity of wireless networks has been growing dramatically for both home and business networking. Nowadays, smart mobile devices equipped with various wireless networking interfaces are used to access the Internet, communicate, socialize and handle short or long-term businesses. As these devices rely on their limited batteries, energy-efficiency has become one of the major issues in both academia and industry. Due to terminal mobility, the variety of radio access technologies and the necessity of connecting to the Internet anytime and anywhere, energy-efficient handover process within the wireless heterogeneous networks has sparked remarkable attention in recent years. In this context, this paper first addresses the impact of specific information (local, network-assisted, QoS-related, user preferences, etc.) received remotely or locally on the energy efficiency as well as the impact of vertical handover phases, and methods. It presents energy-centric state-of-the-art vertical handover approaches and their impact on energy efficiency. The paper also discusses the recommendations on possible energy gains at different stages of the vertical handover process
Energy-efficient vertical handover parameters, classification and solutions over wireless heterogeneous networks: a comprehensive survey
In the last few decades, the popularity of wireless networks has been growing dramatically for both home and business networking. Nowadays, smart mobile devices equipped with various wireless networking interfaces are used to access the Internet, communicate, socialize and handle short or long-term businesses. As these devices rely on their limited batteries, energy-efficiency has become one of the major issues in both academia and industry. Due to terminal mobility, the variety of radio access technologies and the necessity of connecting to the Internet anytime and anywhere, energy-efficient handover process within the wireless heterogeneous networks has sparked remarkable attention in recent years. In this context, this paper first addresses the impact of specific information (local, network-assisted, QoS-related, user preferences, etc.) received remotely or locally on the energy efficiency as well as the impact of vertical handover phases, and methods. It presents energy-centric state-of-the-art vertical handover approaches and their impact on energy efficiency. The paper also discusses the recommendations on possible energy gains at different stages of the vertical handover process
Mobility Study for Named Data Networking in Wireless Access Networks
Information centric networking (ICN) proposes to redesign the Internet by
replacing its host-centric design with information-centric design.
Communication among entities is established at the naming level, with the
receiver side (referred to as the Consumer) acting as the driving force behind
content delivery, by interacting with the network through Interest message
transmissions. One of the proposed advantages for ICN is its support for
mobility, by de-coupling applications from transport semantics. However, so
far, little research has been conducted to understand the interaction between
ICN and mobility of consuming and producing applications, in protocols purely
based on information-centric principles, particularly in the case of NDN. In
this paper, we present our findings on the mobility-based performance of Named
Data Networking (NDN) in wireless access networks. Through simulations, we show
that the current NDN architecture is not efficient in handling mobility and
architectural enhancements needs to be done to fully support mobility of
Consumers and Producers.Comment: to appear in IEEE ICC 201
SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS
A finales de los años noventa, y al comienzo del nuevo milenio, las redes inalámbricas han evolucionado bastante, pasando de ser sólo una tecnología prometedora para convertirse en un requisito para las actividades cotidianas en las sociedades desarrolladas. La infraestructura de transporte también ha evolucionado, ofreciendo comunicación a bordo para mejorar la seguridad vial y el acceso a contenidos de información y entretenimiento.
Los requisitos de los usuarios finales se han hecho dependientes de la tecnología, lo que significa que sus necesidades de conectividad han aumentado debido a los diversos requisitos de las aplicaciones que se ejecutan en sus dispositivos móviles, tales como tabletas, teléfonos inteligentes, ordenadores portátiles o incluso ordenadores de abordo (On-Board Units (OBUs)) dentro de los vehículos. Para cumplir con dichos requisitos de conectividad, y teniendo en cuenta las diferentes redes inalámbricas disponibles, es necesario adoptar técnicas de Vertical Handover (VHO) para cambiar de red de forma transparente y sin necesidad de intervención del usuario.
El objetivo de esta tesis es desarrollar algoritmos de decisión (Vertical Handover Decision Algorithms (VHDAs)) eficientes y escalables, optimizados para el contexto de las redes vehiculares. En ese sentido se ha propuesto, desarrollado y probado diferentes algoritmos de decisión basados en la infraestructura disponible en las actuales, y probablemente en las futuras, redes inalámbricas y redes vehiculares. Para ello se han combinado diferentes técnicas, métodos computacionales y modelos matemáticos, con el fin de garantizar una conectividad apropiada, y realizando el handover hacia las redes más adecuadas de manera a cumplir tanto con los requisitos de los usuarios como los requisitos de las aplicaciones.
Con el fin de evaluar el contexto, se han utilizado diferentes herramientas para obtener información variada, como la disponibilidad de la red, el estado de la red, la geolocalizaciónMárquez Barja, JM. (2012). SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17869Palanci
Smart handoff technique for internet of vehicles communication using dynamic edge-backup node
© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence.
The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/electronics9030524A vehicular adhoc network (VANET) recently emerged in the the Internet of Vehicles (IoV); it involves the computational processing of moving vehicles. Nowadays, IoV has turned into an interesting field of research as vehicles can be equipped with processors, sensors, and communication devices. IoV gives rise to handoff, which involves changing the connection points during the online communication session. This presents a major challenge for which many standardized solutions are recommended. Although there are various proposed techniques and methods to support seamless handover procedure in IoV, there are still some open research issues, such as unavoidable packet loss rate and latency. On the other hand, the emerged concept of edge mobile computing has gained crucial attention by researchers that could help in reducing computational complexities and decreasing communication delay. Hence, this paper specifically studies the handoff challenges in cluster based handoff using new concept of dynamic edge-backup node. The outcomes are evaluated and contrasted with the network mobility method, our proposed technique, and other cluster-based technologies. The results show that coherence in communication during the handoff method can be upgraded, enhanced, and improved utilizing the proposed technique.Published onlin
A real-time power monitoring and energy-efficient network/interface selection tool for android smartphones
Energy efficiency in wireless and cellular networks has become one of the most important concerns for both academia and industry due to battery dependence of mobile devices. In this regard, Wireless Network Interface Cards (WNICs) of mobile devices have to be taken into account carefully as they consume an important chunk of the system's total energy. In this paper, we propose a real-time network power consumption profiler and an energy-aware network/interface selection tool for Android-based smartphones. The tool has been freely released on the Android Play Store. The proposed solution reports the power consumption levels of different network interfaces (Wi-Fi and Cellular) by making use of actual packet measurements and precise computations, and enables the devices to handover horizontally/vertically in order to improve the energy efficiency. In this context, widespread analyses have been executed to show the accuracy of the proposed tool. The results demonstrate that the proposed tool is very accurate for any type of IEEE 802.11 wireless or cellular stations, regardless of having different amount of channel utilization, transmission rates, signal strengths or traffic types
A real-time power monitoring and energy-efficient network/interface selection tool for android smartphones
Energy efficiency in wireless and cellular networks has become one of the most important concerns for both academia and industry due to battery dependence of mobile devices. In this regard, Wireless Network Interface Cards (WNICs) of mobile devices have to be taken into account carefully as they consume an important chunk of the system's total energy. In this paper, we propose a real-time network power consumption profiler and an energy-aware network/interface selection tool for Android-based smartphones. The tool has been freely released on the Android Play Store. The proposed solution reports the power consumption levels of different network interfaces (Wi-Fi and Cellular) by making use of actual packet measurements and precise computations, and enables the devices to handover horizontally/vertically in order to improve the energy efficiency. In this context, widespread analyses have been executed to show the accuracy of the proposed tool. The results demonstrate that the proposed tool is very accurate for any type of IEEE 802.11 wireless or cellular stations, regardless of having different amount of channel utilization, transmission rates, signal strengths or traffic types
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
This Thesis will propose an LTE-5G tight integration architecture, based on mobile terminals' dual connectivity to LTE and 5G radio access networks, and will evaluate which are the new network procedures that will be needed to support it. Moreover, this new architecture will be implemented in the ns-3 simulator, and a thorough simulation campaign will be conducted in order to evaluate its performance, with respect to the baseline of handover between LTE and 5
- …