Smart Directional Data Aggregation in VANETs

International audienceThe ultimate goal of a Traffic Information System (TIS) consists in properly informing vehicles about road traffic conditions in order to reduce traffic jams and consequently CO2 emission while increasing the user comfort. Therefore, the design of an efficient aggregation protocol that combines correlated traffic information like location, speed and direction known as Floating Car Data (FCD) is of paramount importance. In this paper, we introduce a new TIS data aggregation protocol called Smart Directional Data Aggregation (SDDA) able to decrease the network overload while obtaining high accurate information on traffic conditions for large road sections. To this end, we introduce three levels of messages filtering: (i) filtering all FCD messages before the aggregation process based on vehicle directions and road speed limitations, (ii) integrating a suppression technique in the phase of information gathering in order to eliminate the duplicate data, and (iii) aggregating the filtered FCD data and then disseminating it to other vehicles. The performed experiments show that the SDDA outperforms existing approaches in terms of effectiveness and efficiency

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment

From MANET to people-centric networking: Milestones and open research challenges

In this paper, we discuss the state of the art of (mobile) multi-hop ad hoc networking with the aim to present the current status of the research activities and identify the consolidated research areas, with limited research opportunities, and the hot and emerging research areas for which further research is required. We start by briefly discussing the MANET paradigm, and why the research on MANET protocols is now a cold research topic. Then we analyze the active research areas. Specifically, after discussing the wireless-network technologies, we analyze four successful ad hoc networking paradigms, mesh networks, opportunistic networks, vehicular networks, and sensor networks that emerged from the MANET world. We also present an emerging research direction in the multi-hop ad hoc networking field: people centric networking, triggered by the increasing penetration of the smartphones in everyday life, which is generating a people-centric revolution in computing and communications

A Framework for Dynamic Traffic Monitoring Using Vehicular Ad-Hoc Networks

Traffic management centers (TMCs) need high-quality data regarding the status of roadways for monitoring and delivering up-to-date traffic conditions to the traveling public. Currently this data is measured at static points on the roadway using technologies that have significant maintenance requirements. To obtain an accurate picture of traffic on any road section at any time requires a real-time probe of vehicles traveling in that section. We envision a near-term future where network communication devices are commonly included in new vehicles. These devices will allow vehicles to form vehicular networks allowing communication among themselves, other vehicles, and roadside units (RSUs) to improve driver safety, provide enhanced monitoring to TMCs, and deliver real-time traffic conditions to drivers. In this dissertation, we contribute and develop a framework for dynamic trafficmonitoring (DTMon) using vehicular networks. We introduce RSUs called task organizers (TOs) that can communicate with equipped vehicles and with a TMC. These TOs can be programmed by the TMC to task vehicles with performing traffic measurements over various sections of the roadway. Measurement points for TOs, or virtual strips, can be changed dynamically, placed anywhere within several kilometers of the TO, and used to measure wide areas of the roadway network. This is a vast improvement over current technology. We analyze the ability of a TO, or multiple TOs, to monitor high-quality traffic datain various traffic conditions (e.g., free flow traffic, transient flow traffic, traffic with congestion, etc.). We show that DTMon can accurately monitor speed and travel times in both free-flow and traffic with transient congestion. For some types of data, the percentage of equipped vehicles, or the market penetration rate, affects the quality of data gathered. Thus, we investigate methods for mitigating the effects of low penetration rate as well as low traffic density on data quality using DTMon. This includes studying the deployment of multiple TOs in a region and the use of oncoming traffic to help bridge gaps in connectivity. We show that DTMon can have a large impact on traffic monitoring. Traffic engineers can take advantage of the programmability of TOs, giving them the ability to measure traffic at any point within several km of a TO. Most real-time traffic maps measure traffic at midpoint of roads between interchanges and the use of this framework would allow for virtual strips to be placed at various locations in between interchanges, providing fine-grained measurements to TMCs. In addition, the measurement points can be adjusted as traffic conditions change. An important application of this is end-of-queue management. Traffic engineers are very interested in deliver timely information to drivers approaching congestion endpoints to improve safety. We show the ability of DTMon in detecting the end of the queue during congestion

Design and analysis of a beacon-less routing protocol for large volume content dissemination in vehicular ad hoc networks

Largevolumecontentdisseminationispursuedbythegrowingnumberofhighquality applications for Vehicular Ad hoc NETworks(VANETs), e.g., the live road surveillance service and the video-based overtaking assistant service. For the highly dynamical vehicular network topology, beacon-less routing protocols have been proven to be efficient in achieving a balance between the system performance and the control overhead. However, to the authors’ best knowledge, the routing design for large volume content has not been well considered in the previous work, which will introduce new challenges, e.g., the enhanced connectivity requirement for a radio link. In this paper, a link Lifetime-aware Beacon-less Routing Protocol (LBRP) is designed for large volume content delivery in VANETs. Each vehicle makes the forwarding decision based on the message header information and its current state, including the speed and position information. A semi-Markov process analytical model is proposed to evaluate the expected delay in constructing one routing path for LBRP. Simulations show that the proposed LBRP scheme outperforms the traditional dissemination protocols in providing a low end-to-end delay. The analytical model is shown to exhibit a good match on the delay estimation with Monte Carlo simulations, as well

A Framework for Incident Detection and notification in Vehicular Ad-Hoc Networks

The US Department of Transportation (US-DOT) estimates that over half of all congestion events are caused by highway incidents rather than by rush-hour traffic in big cities. The US-DOT also notes that in a single year, congested highways due to traffic incidents cost over $75 billion in lost worker productivity and over 8.4 billion gallons of fuel. Further, the National Highway Traffic Safety Administration (NHTSA) indicates that congested roads are one of the leading causes of traffic accidents, and in 2005 an average of 119 persons died each day in motor vehicle accidents. Recently, Vehicular Ad-hoc Networks (VANET) employing a combination of Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) wireless communication have been proposed to alert drivers to traffic events including accidents, lane closures, slowdowns, and other traffic-safety issues. In this thesis, we propose a novel framework for incident detection and notification dissemination in VANETs. This framework consists of three main components: a system architecture, a traffic incident detection engine and a notification dissemination mechanism. The basic idea of our framework is to collect and aggregate traffic-related data from passing cars and to use the aggregated information to detect traffic anomalies. Finally, the suitably filtered aggregated information is disseminated to alert drivers about traffic delays and incidents. The first contribution of this thesis is an architecture for the notification of traffic incidents, NOTICE for short. In NOTICE, sensor belts are embedded in the road at regular intervals, every mile or so. Each belt consists of a collection of pressure sensors, a simple aggregation and fusion engine, and a few small transceivers. The pressure sensors in each belt allow every message to be associated with a physical vehicle passing over that belt. Thus, no one vehicle can pretend to be multiple vehicles and then, is no need for an ID to be assigned to vehicles. Vehicles in NOTICE are fitted with a tamper-resistant Event Data Recorder (EDR), very much like the well-known black-boxes onboard commercial aircraft. EDRs are responsible for storing vehicles behavior between belts such as acceleration, deceleration and lane changes. Importantly, drivers can provide input to the EDR, using a simple menu, either through a dashboard console or through verbal input. The second contribution of this thesis is to develop incident detection techniques that use the information provided by cars in detecting possible incidents and traffic anomalies using intelligent inference techniques. For this purpose, we developed deterministic and probabilistic techniques to detect both blocking incidents, accidents for examples, as well as non-blocking ones such as potholes. To the best of our knowledge, our probabilistic technique is the first VANET based automatic incident detection technique that is capable of detecting both blocking and non blocking incidents. Our third contribution is to provide an analysis for vehicular traffic proving that VANETs tend to be disconnected in many highway scenarios, consisting of a collection of disjoint clusters. We also provide an analytical way to compute the expected cluster size and we show that clusters are quite stable over time. To the best of our knowledge, we are the first in the VANET community to prove analytically that disconnection is the norm rather than the exceptions in VANETs. Our fourth contribution is to develop data dissemination techniques specifically adapted to VANETs. With VANETs disconnection in mind, we developed data dissemination approaches that efficiently propagate messages between cars and belts on the road. We proposed two data dissemination techniques, one for divided roads and another one for undivided roads. We also proposed a probabilistic technique used by belts to determine how far should an incident notification be sent to alert approaching drivers. Our fifth contribution is to propose a security technique to avoid possible attacks from malicious drivers as well as preserving driver\u27s privacy in data dissemination and notification delivery in NOTICE. We also proposed a belt clustering scheme to reduce the probability of having a black-hole in the message dissemination while reducing also the operational burden if a belt is compromised

AN ADAPTIVE INFORMATION DISSEMINATION MODEL FOR VANET COMMUNICATION

Vehicular ad hoc networks (VANETs) have been envisioned to be useful in road safety and many commercial applications. The growing trend to provide communication among the vehicles on the road has provided the opportunities for developing a variety of applications for VANET. The unique characteristics of VANET bring about new research challenges

Review of Parameters in Routing Protocols in Vehicular Ad-hoc Networks

Vehicular Ad_hoc Network  (VANET) is a sophisticated elegance of devoted cellular network that permits automobiles to intelligently communicate for different   roadside infrastructure. VANETs bring with it some of demanding situations associated with Quality of Service (QoS) and performance. QoS relies upon on many parameters which includes packet transport ratio, bandwidth, postpone variance, records latency, etc. This paper, discuss numerous troubles associated with latency records, bandwidth usage, and transport of packet in VANETs. The demanding situations have been recognized in offering security, reliability and confidentiality of posted records. Finally, numerous packages of VANETs also are introduced in the modern computing scenario