Smart Dimensioning of IP Network Links

Link dimensioning is generally considered as an effective and (operationally) simple mechanism to meet (given) performance requirements. In practice, the required link capacity C is often estimated by rules of thumb, such as C = d·M, where M is the (envisaged) average traffic rate, and d some (empirically determined) constant larger than 1. This paper studies the viability of this class of ‘simplistic’ dimensioning rules. Throughout, the performance criterion imposed is that the fraction of intervals of length T in which the input exceeds the vailable output capacity (i.e., CT) should not exceed $\varepsilon$, for given T and $\varepsilon$.\ud We first present a dimensioning formula that expresses the required link capacity as a function of M and a variance term V(T), which captures the burstiness on timescale T. We explain how M and V(T) can be estimated with low measurement effort. The dimensioning formula is then used to validate dimensioning rules of the type C = d·M. Our main findings are: (i) the factor d is strongly affected by the nature of the traffic, the level of aggregation, and the network infrastructure; if these conditions are more or less constant, one could empirically determine d; (ii) we can explicitly characterize how d is affected by the ‘performance parameters’, i.e., T and $\varepsilon$

Power consumption modeling in optical multilayer networks

The evaluation of and reduction in energy consumption of backbone telecommunication networks has been a popular subject of academic research for the last decade. A critical parameter in these studies is the power consumption of the individual network devices. It appears that across different studies, a wide range of power values for similar equipment is used. This is a result of the scattered and limited availability of power values for optical multilayer network equipment. We propose reference power consumption values for Internet protocol/multiprotocol label switching, Ethernet, optical transport networking and wavelength division multiplexing equipment. In addition we present a simplified analytical power consumption model that can be used for large networks where simulation is computationally expensive or unfeasible. For illustration and evaluation purpose, we apply both calculation approaches to a case study, which includes an optical bypass scenario. Our results show that the analytical model approximates the simulation result to over 90% or higher and that optical bypass potentially can save up to 50% of power over a non-bypass scenario

Logical topology design for IP rerouting: ASONs versus static OTNs

IP-based backbone networks are gradually moving to a network model consisting of high-speed routers that are flexibly interconnected by a mesh of light paths set up by an optical transport network that consists of wavelength division multiplexing (WDM) links and optical cross-connects. In such a model, the generalized MPLS protocol suite could provide the IP centric control plane component that will be used to deliver rapid and dynamic circuit provisioning of end-to-end optical light paths between the routers. This is called an automatic switched optical (transport) network (ASON). An ASON enables reconfiguration of the logical IP topology by setting up and tearing down light paths. This allows to up- or downgrade link capacities during a router failure to the capacities needed by the new routing of the affected traffic. Such survivability against (single) IP router failures is cost-effective, as capacity to the IP layer can be provided flexibly when necessary. We present and investigate a logical topology optimization problem that minimizes the total amount or cost of the needed resources (interfaces, wavelengths, WDM line-systems, amplifiers, etc.) in both the IP and the optical layer. A novel optimization aspect in this problem is the possibility, as a result of the ASON, to reuse the physical resources (like interface cards and WDM line-systems) over the different network states (the failure-free and all the router failure scenarios). We devised a simple optimization strategy to investigate the cost of the ASON approach and compare it with other schemes that survive single router failures

Energy-efficient traffic engineering

The energy consumption in telecommunication networks is expected to grow considerably, especially in core networks. In this chapter, optimization of energy consumption is approached from two directions. In a first study, multilayer traffic engineering (MLTE) is used to assign energy-efficient paths and logical topology to IP traffic. The relation with traditional capacity optimization is explained, and the MLTE strategy is applied for daily traffic variations. A second study considers the core network below the IP layer, giving a detailed power consumption model. Optical bypass is evaluated as a technique to achieve considerable power savings over per-hop opticalelectronicoptical regeneration. Document type: Part of book or chapter of boo

Next Generation High Throughput Satellite System

This paper aims at presenting an overview of the state-of-the-art in High Throughput Satellite (HTS) systems for Fixed Satellite Services (FSS) and High Density-FSS. Promising techniques and innovative strategies that can enhance system performance are reviewed and analyzed aiming to show what to expect for next generation ultra-high capacity satellite systems. Potential air interface evolutions, efficient frequency plans,feeder link dimensioning strategies and interference cancellation techniques are presented to show how Terabit/s satellite myth may turn into reality real soon

Joint dimensioning of server and network infrastructure for resilient optical grids/clouds

We address the dimensioning of infrastructure, comprising both network and server resources, for large-scale decentralized distributed systems such as grids or clouds. We design the resulting grid/cloud to be resilient against network link or server failures. To this end, we exploit relocation: Under failure conditions, a grid job or cloud virtual machine may be served at an alternate destination (i.e., different from the one under failure-free conditions). We thus consider grid/cloud requests to have a known origin, but assume a degree of freedom as to where they end up being served, which is the case for grid applications of the bag-of-tasks (BoT) type or hosted virtual machines in the cloud case. We present a generic methodology based on integer linear programming (ILP) that: 1) chooses a given number of sites in a given network topology where to install server infrastructure; and 2) determines the amount of both network and server capacity to cater for both the failure-free scenario and failures of links or nodes. For the latter, we consider either failure-independent (FID) or failure-dependent (FD) recovery. Case studies on European-scale networks show that relocation allows considerable reduction of the total amount of network and server resources, especially in sparse topologies and for higher numbers of server sites. Adopting a failure-dependent backup routing strategy does lead to lower resource dimensions, but only when we adopt relocation (especially for a high number of server sites): Without exploiting relocation, potential savings of FD versus FID are not meaningful

A Survey of Green Networking Research

Reduction of unnecessary energy consumption is becoming a major concern in wired networking, because of the potential economical benefits and of its expected environmental impact. These issues, usually referred to as "green networking", relate to embedding energy-awareness in the design, in the devices and in the protocols of networks. In this work, we first formulate a more precise definition of the "green" attribute. We furthermore identify a few paradigms that are the key enablers of energy-aware networking research. We then overview the current state of the art and provide a taxonomy of the relevant work, with a special focus on wired networking. At a high level, we identify four branches of green networking research that stem from different observations on the root causes of energy waste, namely (i) Adaptive Link Rate, (ii) Interface proxying, (iii) Energy-aware infrastructures and (iv) Energy-aware applications. In this work, we do not only explore specific proposals pertaining to each of the above branches, but also offer a perspective for research.Comment: Index Terms: Green Networking; Wired Networks; Adaptive Link Rate; Interface Proxying; Energy-aware Infrastructures; Energy-aware Applications. 18 pages, 6 figures, 2 table

IT and Multi-layer Online Resource Allocation and Offline Planning in Metropolitan Networks

Metropolitan networks are undergoing a major technological breakthrough leveraging the capabilities of software-defined networking (SDN) and network function virtualization (NFV). NFV permits the deployment of virtualized network functions (VNFs) on commodity hardware appliances which can be combined with SDN flexibility and programmability of the network infrastructure. SDN/NFV-enabled networks require decision-making in two time scales: short-term online resource allocation and mid-to-long term offline planning. In this paper, we first tackle the dimensioning of SDN/NFV-enabled metropolitan networks paying special attention to the role that latency plays in the capacity planning. We focus on a specific use-case: the metropolitan network that covers the Murcia - Alicante Spanish regions. Then, we propose a latency-aware multilayer service-chain allocation (LA-ML-SCA) algorithm to explore a range of maximum latency requirements and their impact on the resources for dimensioning the metropolitan network. We observe that design costs increase for low latency requirements as more data center facilities need to be spread to get closer to the network edge, reducing the economies of scale on the IT infrastructure. Subsequently, we review our recent joint computation of multi-site VNF placement and multilayer resource allocation in the deployment of a network service in a metro network. Specifically, a set of subroutines contained in LA-ML-SCA are experimentally validated in a network optimization-as-a-service architecture that assists an Open-Source MANO instance, virtual infrastructure managers and WAN controllers in a metro network test-bed.Grant numbers : Go2Edge - Engineering Future Edge Computing Networks, Systems and Services.@ 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Valuing flexibility in the migration to flexible-grid networks

Increasing network demand is expected to put pressure on the available capacity in core networks. Flexible optical networking can now be installed to increase network capacity in light of future traffic demands. However, this technology is still in its infancy and might lack the full functionality that may appear within a few years. When replacing core network equipment, it is therefore important to make the right investment decision between upgrading toward flexible-grid or fixed-grid equipment. This paper researches various installation options using a techno-economic analysis, extended with real option insights, showing the impact of uncertainty and flexibility on the investment decision. By valuing the different options, a correct investment decision can be made