Wideband Wearable Antennas for 5G, IoT, and Medical Applications

Wearable compact antennas are a major part of every wearable 5G communication system, IoT, and biomedical systems. Several types of printed antennas are employed as wearable antennas. Printed dipole, microstrip antennas, printed loops, slot antennas, and PIFA antennas are employed as wearable antennas. Compact efficient antennas significantly affect the electrical performance of wearable communication systems. In several communication and medical systems, the polarization of the received signal is not known. The polarization of the received signal may be vertical, horizontal, or circular polarized. In these systems, it is crucial to use dual-polarized receiving antennas. The antennas presented in this chapter may be linearly or dually polarized. Design trade-offs, simulation results, and measured results on human body of small wideband printed antennas with high efficiency are presented in this chapter. For example, the low-volume dually polarized antenna dimensions are 50 × 50 × 0.5 mm. The antenna beamwidth is around 100°. The antennas gain is around 0–4 dBi. Metamaterial technology is used to improve the electrical performance of wearable antennas. The proposed antennas may be used in wearable wireless communication and medical RF systems. The antennas’ electrical performance on human body is presented in this chapter

Improved reception of in-body signals by means of a wearable multi-antenna system

High data-rate wireless communication for in-body human implants is mainly performed in the 402-405 MHz Medical Implant Communication System band and the 2.45 GHz Industrial, Scientific and Medical band. The latter band offers larger bandwidth, enabling high-resolution live video transmission. Although in-body signal attenuation is larger, at least 29 dB more power may be transmitted in this band and the antenna efficiency for compact antennas at 2.45 GHz is also up to 10 times higher. Moreover, at the receive side, one can exploit the large surface provided by a garment by deploying multiple compact highly efficient wearable antennas, capturing the signals transmitted by the implant directly at the body surface, yielding stronger signals and reducing interference. In this paper, we implement a reliable 3.5 Mbps wearable textile multi-antenna system suitable for integration into a jacket worn by a patient, and evaluate its potential to improve the In-to-Out Body wireless link reliability by means of spatial receive diversity in a standardized measurement setup. We derive the optimal distribution and the minimum number of on-body antennas required to ensure signal levels that are large enough for real-time wireless endoscopy-capsule applications, at varying positions and orientations of the implant in the human body

Wireless body sensor networks for health-monitoring applications

This is an author-created, un-copyedited version of an article accepted for publication in Physiological Measurement. The publisher is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01

Circularly-polarised cavity-backed wearable antenna in SIW technology

This study presents a circularly-polarised substrate-integrated waveguide (SIW) antenna implemented using a textile substrate and operating at 2.45GHz, in the industrial, scientific, and medical frequency band. The antenna topology is based on a folded cavity with an annular ring as a radiating element, and it permits to obtain compact size and low sensitivity to the environment, without deteriorating the radiating performance. These characteristics, together with the choice of adopting a textile substrate, make the SIW antenna suitable for the integration in wearable systems for body-centric applications. The electromagnetic performance of the proposed antenna achieved in simulations was verified through the measurement of the device in an anechoic chamber. The circularly-polarised antenna exhibits a maximum gain of 6.5dBi, a radiation efficiency of 73% and a very high front-to-back ratio

Design of a Finger Ring Antenna for Wireless Sensor Networks

Body-centric communications have become very active area of research due to ever-growing demand of portability. Advanced applications such as; health monitoring, tele-medicine, identification systems, performance monitoring of athletes, defence systems and personal entertainment are adding to its popularity. In this paper, a novel wearable antenna radiating at 5 GHz for the body-centric wireless sensor networks has been presented. The antenna consists of a conventional microstrip patch mounted on a gold base and could be worn in a finger like a ring. CST Microwave Studio is used for modelling, simulation and optimisation of the antenna. The simulated results show that the proposed antenna has a -10 dB bandwidth of 90.3 MHz with peak gain of 6.9 dBi. Good performance in terms of bandwidth, directivity, gain, return loss and radiation characteristics, along with a miniaturised form factor makes it a very well suited candidate for the body-worn wireless sensor applications

Correlated shadowing and fading characterization of MIMO off-body channels by means of multiple autonomous on-body nodes

In off-body communication systems low-cost and compact transceivers are important for realistic applications. An autonomous off-body wireless node was designed and integrated onto a textile antenna. Channel measurements were performed for an indoor non line-off-sight 4x2 MIMO (Multiple-Input Multiple-Output) link using four off-body transmitting nodes and two similar fixed receiving nodes. The channel behavior is characterized as Rayleigh fading with lognormal shadowing and is fitted to a model determining fading and shadowing correlation matrices. The physics of the propagation is captured accurately by the model which is further used to simulate a link using diversity by means of Selection Combining, as implemented on the wireless nodes. The performance of measured and simulated links is compared in terms of outage probability level. The measurements and analysis confirm that the correlated shadowing and fading model is relevant for realistic off-body networks employing diversity by means of Selection Combining

On-body wearable repeater as a data link relay for in-body wireless implants

Wireless medical devices implanted at different locations in the human body have a wide application range. Yet, high-data-rate communication in the 2.4-GHz Industrial, Scientific, and Medical band suffers from high in-body attenuation loss. Link improvement cannot be obtained by simply increasing transmit power, as battery life is limited and in-body absorption has to remain low. To overcome these problems, a flexible on-body textile patch antenna, robustly matched directly to the human body, is designed and developed as part of a wearable repeater, enhancing communication with implanted wireless devices. This receive antenna, which can cope with different morphologies and patient movements, enables reliable high data rate and low-power communication links with an implant. A data link measurement is performed for the on-body repeater system placed on the human torso, relaying the signals to nearby medical equipment, without wired connection to the patient. The performance of the data link is experimentally assessed in different measurement scenarios. For a repeater system relying on simple analog amplification, which is low-cost, energy-efficient, and can be fully integrated into clothing, excellent results are obtained, with an average measured signal-to-noise ratio of 33 dB for tissue depths up to 85 mm

Communication system for a tooth-mounted RF sensor used for continuous monitoring of nutrient intake

In this Thesis, the communication system of a wearable device that monitors the user’s diet is studied. Based in a novel RF metamaterial-based mouth sensor, different decisions have to be made concerning the system’s technologies, such as the power source options for the device, the wireless technology used for communications and the method to obtain data from the sensor. These issues, along with other safety rules and regulations, are reviewed, as the first stage of development of the Food-Intake Monitoring projectOutgoin