Enhancing fluorescence excitation and collection from the nitrogen-vacancy center in diamond through a micro-concave mirror

We experimentally demonstrate a simple and robust optical fibers based method to achieve simultaneously efficient excitation and fluorescence collection from Nitrogen-Vacancy (NV) defects containing micro-crystalline diamond. We fabricate a suitable micro-concave (MC) mirror that focuses scattered excitation laser light into the diamond located at the focal point of the mirror. At the same instance, the mirror also couples the fluorescence light exiting out of the diamond crystal in the opposite direction of the optical fiber back into the optical fiber within its light acceptance cone. This part of fluorescence would have been otherwise lost from reaching the detector. Our proof-of-principle demonstration achieves a 25 times improvement in fluorescence collection compared to the case of not using any mirrors. The increase in light collection favors getting high signal-to-noise ratio (SNR) optically detected magnetic resonance (ODMR) signals hence offers a practical advantage in fiber-based NV quantum sensors. Additionally, we compacted the NV sensor system by replacing some bulky optical elements in the optical path with a 1x2 fiber optical coupler in our optical system. This reduces the complexity of the system and provides portability and robustness needed for applications like magnetic endoscopy and remote-magnetic sensing.Comment: 6 pages, 8 figure

Composite polymer membranes for laserinduced fluorescence thermometry

We demonstrate a modified version of laser-induced fluorescence thermometry (LIFT) for mapping temperature gradients in the vicinity of small photothermal devices. Our approach is based on temperature sensitive fluorescent membranes fabricated with rhodamine B and polydimethylsiloxane (PDMS). Relevant membrane features for LIFT, such as temperature sensitivity, thermal quenching and photobleaching are presented for a range of 25 °C to 90 °C, and their performance is evaluated upon obtaining the temperature gradients produced in the proximity of optical fiber micro-heaters. Our results show that temperature measurements in regions as small as 750 μm x 650 μm, with a temperature resolution of 1 °C, can be readily obtained

Pulsed high magnetic field measurement via a Rubidium vapor sensor

We present a new technique to measure pulsed magnetic fields based on the use of Rubidium in gas phase as a metrological standard. We have therefore developed an instrument based on laser inducing transitions at about 780~nm (D2 line) in a Rubidium gas contained in a mini-cell of 3~mm~x~3~mm cross section. To be able to insert such a cell in a standard high field pulsed magnet we have realized a fibred probe kept at a fixed temperature. Transition frequencies for both the $\pi$ (light polarization parallel to the magnetic field) and $\sigma$ (light polarization perpendicular to the magnetic field) configurations are measured by a commercial wavemeter. One innovation of our sensor is that in addition of monitoring the light transmitted by the Rb cell, which is usual, we also monitor the fluorescence emission of the gas sample from a very small volume with the advantage of reducing the impact of the field inhomogeneity on the field measurement. Our sensor has been tested up to about 58~T.Comment: Submitted to Review Scientific Instrument

Enhanced Raman Detection System based on a Hollow-core Fiber Probe design

This paper focus on an enhanced Raman-based detection probe and its performance evaluated. The probe employs a hollow-core fiber design to allow liquid micro-sample to be analyzed. The hollow-core fiber is used both to transmit the light signal used to excite the sample and to collect the Raman scattering signal received from the micro-sample under analysis. In order to maximize the performance of the system, various parameters have been studied experimentally, including the diameter and the height of the liquid sample in the probe. The aim has been optimizing both as a means to enhance the Raman scattering signal received from the liquid sample. As a result, a Raman-based detection probe using a reflector approach was developed and evaluated. This design enabling a greater area for interaction with the sample to be formed and to concentrate the excitation light into it. This then increases the efficiency of the light-liquid interaction and improves the collection efficiently of the forward Raman scattering light signal. With the use of this design, the detected Raman scattering signal was increased by a factor of 103~104 over what otherwise would be achieved. A key feature is that with the use of a hollow-core fiber to collect the liquid sample, only a very small volume is needed, making this well suited to practical applications where limited amounts of material are available e.g. biofluids or high value liquids. The system designed and evaluated thus provides the basis of an effective all-fiber Raman-based detection system, capable of being incorporated into portable analysis equipment for rapid detection and in-the-field use

Electro-optic architecture for servicing sensors and actuators in advanced aircraft propulsion systems

A detailed design of a fiber optic propulsion control system, integrating favored sensors and electro-optics architecture is presented. Layouts, schematics, and sensor lists describe an advanced fighter engine system model. Components and attributes of candidate fiber optic sensors are identified, and evaluation criteria are used in a trade study resulting in favored sensors for each measurand. System architectural ground rules were applied to accomplish an electro-optics architecture for the favored sensors. A key result was a considerable reduction in signal conductors. Drawings, schematics, specifications, and printed circuit board layouts describe the detailed system design, including application of a planar optical waveguide interface

Polarimetric optical-fibre sensor for biochemical measurements

The use of an optical-fibre polarimeter as a chemical sensor is demonstrated. The compound to be detected is allowed to adsorb onto a decladded 5 cm length of the fibre. The fibre is polarization maintaining with an elliptical fibre core and a D-shaped geometry. The overall retardation stability of this fibre polarimeter is ≈ 0.5 × 2π rad m−1 K−1. With this sensor adsorption processes of proteins can be followed on-line. The resulting relative phase retardations caused by the growth of a monolayer of antibodies (αhCG, αhSA) are 0.25 × 2π. For the much smaller protein hSA, this value is 0.1 × 2

Strain sensing based on radiative emission-absorption mechanism using dye-doped polymer optical fiber

A stress sensor based on a dye-doped polymeric optical fiber is able to detect stress by simple comparison of two luminescence peaks from a pair of energy transfer organic dyes. Coumarin 540A (donor) and Rhodamine 6G (acceptor) were doped in the core and cladding of the fiber, respectively. For various laser wavelengths, the change in the near-field pattern and visible emission spectrum upon variation in the fiber bending diameter was evaluated. From a comparison with a low-numerical-aperture fiber, it is shown that the sensitivity of the sensor is controllable by optimization of the waveguide parameters