Evaluation and implementation of a 5-level hybrid DC-DC converter

In this work, a hybrid voltage regulator topology is analyzed, implemented, and evaluated. The common topologies of DC-DC converters have proven to be lacking in some aspects, such as integrability for buck converters, or maximum efficiency for switched-capacitor regulators. The hybrid topology tackles these shortcomings by combining the advantages of switched-capacitor and inductor-based voltage regulators. A 5-level buck converter is evaluated, implemented, and compared to other converter implementations using the same components. The 5-Level Buck converter can achieve 5 different levels, allowing it to cover 4 operation regions, each between 2 levels. Accordingly, it covers a wide range of output voltages. By reducing the voltage difference at the inductor input, the 5-level buck converter can use smaller inductor compared to both 3-level and conventional buck converters which makes it cheaper, smaller in size, and much more efficient. Simulations show proper functionality of the 5-Level topology, while putting restrictions on the inductor size, efficiency, and component footprint (or total converter area). A test PCB is implemented for verification of the functionality and experimental measurements show that for the same switching frequency and inductor size, the 5-level buck converter achieves up to 15% efficiency improvement over a conventional buck converter and a 3-level buck converter at certain output voltage ranges. Peak efficiency of 94% has been achieved by the 5-Level hybrid converter, which includes all external switching and conduction losses. The proposed hybrid topology proved to yield high conversion efficiency even in the face of component size limitations, which indicates potential benefit in using multilevel converters for several off-chip as well as on-chip applications

Multilevel multistate hybrid voltage regulator

In this work, a new set of voltage regulators as well as some controlling methods and schemes are proposed. While normal switched capacitor voltage regulators are easy integrable, they are suffering from charge sharing losses as well as fast degradation of efficiency when deviating from target operation point. On the other hand, conventional buck converters use bulky magnetic components that introduce challenges to integrate them on chip. The new set of voltage regulators covers the gap between inductor-based and capacitor-based voltage regulators by taking the advantages of both of them while avoiding or minimizing their disadvantages. The voltage regulator device consists of a switched capacitor circuit that is periodically switching its output between different voltage levels followed by a low pass filter to give a regulated output voltage. The voltage regulator is capable of converting an input voltage to a wide range of output voltage with a high efficiency that is roughly constant over the whole operation range. By switching between adjacent voltage levels, the voltage drop on the inductor is limited allowing for the use of smaller inductor sizes while maintaining the same performance. The general concept of the proposed voltage regulator as well as some operating conditions and techniques are explained. A phase interleaving technique to operate the multilevel multistate voltage regulator has been proposed. In this technique, the phases of two or more voltage levels are interleaved which enhances the effective switching frequency of the charge transferring components. This results in a further boost in the proposed regulator\u27s performance. A 4-level 4-state hybrid voltage regulator has been introduced as an application on the proposed concepts and techniques. It shows better performance compared to both integrated inductor-based and capacitor-based voltage regulators. The results prove that the proposed set of voltage regulators offers a potential move towards easing the integration of voltage regulators on chip with a performance that approaches that of off-chip voltage regulators

Power Management ICs for Internet of Things, Energy Harvesting and Biomedical Devices

This dissertation focuses on the power management unit (PMU) and integrated circuits (ICs) for the internet of things (IoT), energy harvesting and biomedical devices. Three monolithic power harvesting methods are studied for different challenges of smart nodes of IoT networks. Firstly, we propose that an impedance tuning approach is implemented with a capacitor value modulation to eliminate the quiescent power consumption. Secondly, we develop a hill-climbing MPPT mechanism that reuses and processes the information of the hysteresis controller in the time-domain and is free of power hungry analog circuits. Furthermore, the typical power-performance tradeoff of the hysteresis controller is solved by a self-triggered one-shot mechanism. Thus, the output regulation achieves high-performance and yet low-power operations as low as 12 µW. Thirdly, we introduce a reconfigurable charge pump to provide the hybrid conversion ratios (CRs) as 1⅓× up to 8× for minimizing the charge redistribution loss. The reconfigurable feature also dynamically tunes to maximum power point tracking (MPPT) with the frequency modulation, resulting in a two-dimensional MPPT. Therefore, the voltage conversion efficiency (VCE) and the power conversion efficiency (PCE) are enhanced and flattened across a wide harvesting range as 0.45 to 3 V. In a conclusion, we successfully develop an energy harvesting method for the IoT smart nodes with lower cost, smaller size, higher conversion efficiency, and better applicability. For the biomedical devices, this dissertation presents a novel cost-effective automatic resonance tracking method with maximum power transfer (MPT) for piezoelectric transducers (PT). The proposed tracking method is based on a band-pass filter (BPF) oscillator, exploiting the PT’s intrinsic resonance point through a sensing bridge. It guarantees automatic resonance tracking and maximum electrical power converted into mechanical motion regardless of process variations and environmental interferences. Thus, the proposed BPF oscillator-based scheme was designed for an ultrasonic vessel sealing and dissecting (UVSD) system. The sealing and dissecting functions were verified experimentally in chicken tissue and glycerin. Furthermore, a combined sensing scheme circuit allows multiple surgical tissue debulking, vessel sealer and dissector (VSD) technologies to operate from the same sensing scheme board. Its advantage is that a single driver controller could be used for both systems simplifying the complexity and design cost. In a conclusion, we successfully develop an ultrasonic scalpel to replace the other electrosurgical counterparts and the conventional scalpels with lower cost and better functionality

Electric Vehicles in New Zealand - Policy, Regulation and Technical Standards for Emerging Vehicle Technology

The need for a technical standard for the conversion of Internal Combustion Engine (ICE) vehicles to electric drive has been identified by government regulators in New Zealand (NZ). The aim of this project was to review the technical and inspection requirements that would allow Electric Vehicle (EV) conversions of passenger vehicles of gross weight < 3500 kg (Class MA), to be safely designed, built, sold, and operated in NZ. A detailed description of the spectrum of EV technology is given. A literature review of NZ and international transport regulations and technical standards has shown many requirements affecting EVs. A risk analysis showed that most EV technological risks related to electrical, battery and braking safety are controlled by implementing a reduction in risk event likelihood, rather than a reduction in risk event severity. This indicates that risk controls need to be reliable in order to be effective. A detailed review of EV electrical systems, Lithium Ion (Li-ion) battery systems and regenerative braking technology is also carried out. With the use of battery chemistries and designs which minimise the risk of failures, coupled with adequate safeguards in the form of redundant protection and well designed component management systems, EV converters can achieve safe and high performance conversions

Final definition and preliminary design study for the initial Atmospheric Cloud Physics Laboratory (ACPL). Phase B: A Spacelab mission payload

Engineering analyses and trades necessary to identify a preferred laboratory concept which will meet the science requirements were conducted. Results are summarized

Linac4 Technical Design Report

Linac4 is an H- linear accelerator, intended to replace Linac2 as injector to the PS Booster (PSB). By delivering to the PSB a beam at 160 MeV energy, Linac4 will provide the conditions to double the brightness and intensity of the beam from the PSB, thus removing the first bottleneck towards higher brightness for the LHC and simplifying operation. Moreover, this new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios and could open the way to future extensions of the CERN accelerator complex towards higher performance. This Technical Design Report presents a detailed technical overview of the Linac4 design as it stands at end 2006

Silicon Photonic Modulators for Low-power Applications

In this book, silicon photonic integrated circuits are combined with electro-optic organic materials for realizing energy-efficient modulators with unprecedented performance. These silicon-organic hybrid Mach-Zehnder modulators feature a compact size, sub-Volt drive voltages, and they support data rates up to 84 Gbit/s. In addition, a wet chemical waveguide fabrication scheme and an efficient fiber-chip coupling scheme are presented

A high-voltage pulsed power modulator for fast-rising arbitrary waveforms

This work presents the design and testing of a new semiconductor-based pulsed power modulator meeting the challenging requirements of a pulsed electron beam device (GESA): a fast-rising (10^12 V/s) output voltage with arbitrary waveform of maximum 120 kV at a maximum current of 600 A for a pulse duration of up to 100 µs