Rotor failure compensation in a biplane quadrotor based on virtual deflection

A biplane quadrotor is a hybrid type of UAV that has wide applications such as payload pickup and delivery, surveillance, etc. This simulation study mainly focuses on handling the total rotor failure, and for that, we propose a control architecture that does not only handle rotor failure but is also able to navigate the biplane quadrotor to a safe place for landing. In this structure, after the detection of total rotor failure, the biplane quadrotor will imitate reallocating control signals and then perform the transition maneuver and switch to the fixed-wing mode; control signals are also reallocated. A synthetic jet actuator (SJA) is used as the redundancy that generates the desired virtual deflection to control the pitch angle, while other states are taken care of by the three rotors. The SJA has parametric nonlinearity, and to handle it, an inverse adaptive compensation scheme is applied and a closed-loop stability analysis is performed based on the Lyapunov method for the pitch subsystem. The effectiveness of the proposed control structure is validated using numerical simulation carried out in the MATLAB Simulink.Web of Science67art. no. 17

Intelligent control of a ducted fan VTOL UAV with conventional control surfaces

Utilizing UAVs for intelligence, surveillance, and reconnaissance (ISR) is beneficial in both military and civil applications. The best candidates for successful close range ISR missions are small VTOL UAVs with high speed capability. Existing UAVs suffer from the design tradeoffs that are usually required, in order to have both VTOL capability and high speed flight performance. In this thesis, we consider a novel UAV design configuration combining several important design elements from rotorcraft, ducted-fan, tail-sitter, and fixed-wing vehicles. While the UAV configuration is more towards the VTOL type, high speed flight is achieved by performing a transition maneuver from vertical attitude to horizontal attitude. In this unique approach, the crucial characteristics of VTOL and high speed flight are attained in a single UAV design. The capabilities of this vehicle come with challenges of which one of the major ones is the development an effective autonomous controller for the full flight envelope. Ducted-fan type UAVs are unstable platform with highly nonlinear behaviour, and with complex aerodynamic, which lead to inaccuracies in the estimation of the vehicle dynamics. Conventional control approaches have limitations in dealing with all these issues. A promising solution to a ducted-fan flight control problem is to use fuzzy logic control. Unlike conventional control approaches, fuzzy logic has the ability of replicating some of the ways of how humans make decisions. Furthermore, it can handle nonlinear models and it can be developed in a relatively short time, as it does not require the complex mathematics associated with classical control theory. In this study, we explore, develop, and implement an intelligent autonomous fuzzy logic controller for a given ducted-fan UAV through a series of simulations

Modeling and H-Infinity Loop Shaping Control of a Vertical Takeoff and Landing Drone

abstract: VTOL drones were designed and built at the beginning of the 20th century for military applications due to easy take-off and landing operations. Many companies like Lockheed, Convair, NASA and Bell Labs built their own aircrafts but only a few from them came in to the market. Usually, flight automation starts from first principles modeling which helps in the controller design and dynamic analysis of the system. In this project, a VTOL drone with a shape similar to a Convair XFY-1 is studied and the primary focus is stabilizing and controlling the flight path of the drone in its hover and horizontal flying modes. The model of the plane is obtained using first principles modeling and controllers are designed to stabilize the yaw, pitch and roll rotational motions. The plane is modeled for its yaw, pitch and roll rotational motions. Subsequently, the rotational dynamics of the system are linearized about the hover flying mode, hover to horizontal flying mode, horizontal flying mode, horizontal to hover flying mode for ease of implementation of linear control design techniques. The controllers are designed based on an H∞ loop shaping procedure and the results are verified on the actual nonlinear model for the stability of the closed loop system about hover flying, hover to horizontal transition flying, horizontal flying, horizontal to hover transition flying. An experiment is conducted to study the dynamics of the motor by recording the PWM input to the electronic speed controller as input and the rotational speed of the motor as output. A theoretical study is also done to study the thrust generated by the propellers for lift, slipstream velocity analysis, torques acting on the system for various thrust profiles.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Proceedings of the International Micro Air Vehicles Conference and Flight Competition 2017 (IMAV 2017)

The IMAV 2017 conference has been held at ISAE-SUPAERO, Toulouse, France from Sept. 18 to Sept. 21, 2017. More than 250 participants coming from 30 different countries worldwide have presented their latest research activities in the field of drones. 38 papers have been presented during the conference including various topics such as Aerodynamics, Aeroacoustics, Propulsion, Autopilots, Sensors, Communication systems, Mission planning techniques, Artificial Intelligence, Human-machine cooperation as applied to drones

Intelligent Control for Fixed-Wing eVTOL Aircraft

Urban Air Mobility (UAM) holds promise for personal air transportation by deploying "flying cars" over cities. As such, fixed-wing electric vertical take-off and landing (eVTOL) aircraft has gained popularity as they can swiftly traverse cluttered areas, while also efficiently covering longer distances. These modes of operation call for an enhanced level of precision, safety, and intelligence for flight control. The hybrid nature of these aircraft poses a unique challenge that stems from complex aerodynamic interactions between wings, rotors, and the environment. Thus accurate estimation of external forces is indispensable for a high performance flight. However, traditional methods that stitch together different control schemes often fall short during hybrid flight modes. On the other hand, learning-based approaches circumvent modeling complexities, but they often lack theoretical guarantees for stability. In the first part of this thesis, we study the theoretical benefits of these fixed-wing eVTOL aircraft, followed by the derivation of a novel unified control framework. It consists of nonlinear position and attitude controllers using forces and moments as inputs; and control allocation modules that determine desired attitudes and thruster signals. Next, we present a composite adaptation scheme for linear-in-parameter (LiP) dynamics models, which provides accurate realtime estimation for wing and rotor forces based on measurements from a three-dimensional airflow sensor. Then, we introduce a design method to optimize multirotor configuration that ensures a property of robustness against rotor failures. In the second part of the thesis, we use deep neural networks (DNN) to learn part of unmodeled dynamics of the flight vehicles. Spectral normalization that regulates the Lipschitz constants of the neural network is applied for better generalization outside the training domain. The resultant network is utilized in a nonlinear feedback controller with a contraction mapping update, solving the nonaffine-in-control issue that arises. Next, we formulate general methods for designing and training DNN-based dynamics, controller, and observer. The general framework can theoretically handle any nonlinear dynamics with prior knowledge of its structure. Finally, we establish a delay compensation technique that transforms nominal controllers for an undelayed system into a sample-based predictive controller with numerical integration. The proposed method handles both first-order and transport delays in actuators and balances between numerical accuracy and computational efficiency to guarantee stability under strict hardware limitations.</p

Safe navigation and motion coordination control strategies for unmanned aerial vehicles

Unmanned aerial vehicles (UAVs) have become very popular for many military and civilian applications including in agriculture, construction, mining, environmental monitoring, etc. A desirable feature for UAVs is the ability to navigate and perform tasks autonomously with least human interaction. This is a very challenging problem due to several factors such as the high complexity of UAV applications, operation in harsh environments, limited payload and onboard computing power and highly nonlinear dynamics. Therefore, more research is still needed towards developing advanced reliable control strategies for UAVs to enable safe navigation in unknown and dynamic environments. This problem is even more challenging for multi-UAV systems where it is more efficient to utilize information shared among the networked vehicles. Therefore, the work presented in this thesis contributes towards the state-of-the-art in UAV control for safe autonomous navigation and motion coordination of multi-UAV systems. The first part of this thesis deals with single-UAV systems. Initially, a hybrid navigation framework is developed for autonomous mobile robots using a general 2D nonholonomic unicycle model that can be applied to different types of UAVs, ground vehicles and underwater vehicles considering only lateral motion. Then, the more complex problem of three-dimensional (3D) collision-free navigation in unknown/dynamic environments is addressed. To that end, advanced 3D reactive control strategies are developed adopting the sense-and-avoid paradigm to produce quick reactions around obstacles. A special case of navigation in 3D unknown confined environments (i.e. tunnel-like) is also addressed. General 3D kinematic models are considered in the design which makes these methods applicable to different UAV types in addition to underwater vehicles. Moreover, different implementation methods for these strategies with quadrotor-type UAVs are also investigated considering UAV dynamics in the control design. Practical experiments and simulations were carried out to analyze the performance of the developed methods. The second part of this thesis addresses safe navigation for multi-UAV systems. Distributed motion coordination methods of multi-UAV systems for flocking and 3D area coverage are developed. These methods offer good computational cost for large-scale systems. Simulations were performed to verify the performance of these methods considering systems with different sizes

TRAJECTORY GENERATION BASED GUIDANCE AND CONTROL OF ROTORCRAFT UNMANNED AERIAL VEHICLES

Ph.DDOCTOR OF PHILOSOPH

Machine learning techniques to estimate the dynamics of a slung load multirotor UAV system

This thesis addresses the question of designing robust and flexible controllers to enable autonomous operation of a multirotor UAV with an attached slung load for general cargo transport. This is achieved by following an experimental approach; real flight data from a slung load multirotor coupled system is used as experience, allowing for a computer software to estimate the pose of the slung in order to propose a swing-free controller that will dampen the oscillations of the slung load when the multirotor is following a desired flight trajectory. The thesis presents the reader with a methodology describing the development path from vehicle design and modelling over slung load state estimators to controller synthesis. Attaching a load via a cable to the underside of the aircraft alters the mass distribution of the combined "airborne entity" in a highly dynamic fashion. The load will be subject to inertial, gravitational and unsteady aerodynamic forces which are transmitted to the aircraft via the cable, providing another source of external force to the multirotor platform and thus altering the flight dynamic response characteristics of the vehicle. Similarly the load relies on the forces transmitted by the multirotor to alter its state, which is much more difficult to control. The principle research hypothesis of this thesis is that the dynamics of the coupled system can be identified by applying Machine Learning techniques. One of the major contributions of this thesis is the estimator that uses real flight data to train an unstructured black-box algorithm that can output the position vector of the load using the vehicle pose and pilot pseudo-controls as input. Experimental results show very accurate position estimation of the load using the machine learning estimator when comparing it with a motion tracking system (~2% offset). Another contribution lies in the avionics solution created for data collection, algorithm execution and control of multirotor UAVs, experimental results show successful autonomous flight with a range of algorithms and applications. Finally, to enable flight capabilities of a multirotor with slung load, a control system is developed that dampens the oscillations of the load; the controller uses a feedback approach to simultaneously prevent exciting swing and to actively dampen swing in the slung load. The methods and algorithms developed in this thesis are validated by flight testing

Aeronautical engineering: A continuing bibliography with indexes (supplement 295)

This bibliography lists 581 reports, articles, and other documents introduced into the NASA Scientific and Technical Information System in Sep. 1993. Subject coverage includes: design, construction and testing of aircraft and aircraft engines; aircraft components, equipment, and systems; ground support systems; and theoretical and applied aspects of aerodynamics and general fluid dynamics