Asynchronous techniques for system-on-chip design

SoC design will require asynchronous techniques as the large parameter variations across the chip will make it impossible to control delays in clock networks and other global signals efficiently. Initially, SoCs will be globally asynchronous and locally synchronous (GALS). But the complexity of the numerous asynchronous/synchronous interfaces required in a GALS will eventually lead to entirely asynchronous solutions. This paper introduces the main design principles, methods, and building blocks for asynchronous VLSI systems, with an emphasis on communication and synchronization. Asynchronous circuits with the only delay assumption of isochronic forks are called quasi-delay-insensitive (QDI). QDI is used in the paper as the basis for asynchronous logic. The paper discusses asynchronous handshake protocols for communication and the notion of validity/neutrality tests, and completion tree. Basic building blocks for sequencing, storage, function evaluation, and buses are described, and two alternative methods for the implementation of an arbitrary computation are explained. Issues of arbitration, and synchronization play an important role in complex distributed systems and especially in GALS. The two main asynchronous/synchronous interfaces needed in GALS-one based on synchronizer, the other on stoppable clock-are described and analyzed

Elastic circuits

Elasticity in circuits and systems provides tolerance to variations in computation and communication delays. This paper presents a comprehensive overview of elastic circuits for those designers who are mainly familiar with synchronous design. Elasticity can be implemented both synchronously and asynchronously, although it was traditionally more often associated with asynchronous circuits. This paper shows that synchronous and asynchronous elastic circuits can be designed, analyzed, and optimized using similar techniques. Thus, choices between synchronous and asynchronous implementations are localized and deferred until late in the design process.Peer ReviewedPostprint (published version

Elasticity and Petri nets

Digital electronic systems typically use synchronous clocks and primarily assume fixed duration of their operations to simplify the design process. Time elastic systems can be constructed either by replacing the clock with communication handshakes (asynchronous version) or by augmenting the clock with a synchronous version of a handshake (synchronous version). Time elastic systems can tolerate static and dynamic changes in delays (asynchronous case) or latencies (synchronous case) of operations that can be used for modularity, ease of reuse and better power-delay trade-off. This paper describes methods for the modeling, performance analysis and optimization of elastic systems using Marked Graphs and their extensions capable of describing behavior with early evaluation. The paper uses synchronous elastic systems (aka latency-tolerant systems) for illustrating the use of Petri nets, however, most of the methods can be applied without changes (except changing the delay model associated with events of the system) to asynchronous elastic systems.Peer ReviewedPostprint (author's final draft

Performance optimization of elastic systems using buffer resizing and buffer insertion

Buffer resizing and buffer insertion are two transformation techniques for the performance optimization of elastic systems. Different approaches for each technique have already been proposed in the literature. Both techniques increase the storage capacity and can potentially contribute to improve the throughput of the system. Each technique offers a different trade-off between area cost and latency. This paper presents a method that combines both techniques to achieve the maximum possible throughput while minimizing the cost of the implementation. The provided method is based on mixed integer linear programming. A set of experiments is designed to show the feasibility of the approach.Peer ReviewedPostprint (published version

Characterization of asynchronous templates for integration into clocked CAD flows

Journal ArticleAsynchronous circuit design can result in substantial benefits of reduced power, improved performance, and high modularity. However, asynchronous design styles are largely incompatible with clocked CAD, which has prevented wide-scale adoption. The key incompatibility is timing. Thus most commercial work relies on custom CAD or untimed delay-insensitive design methodologies. This paper proposes a new methodology, based on formal verification and relative timing, to create and prove correct necessary constraints to support asynchronous design with traditional clocked CAD. These constraints support timing driven synthesis, place and route, and behavior and timing validation of fully asynchronous designs using traditional clocked CAD flows. This flow is demonstrated through a simple example pipeline in IBM's 65nm process showing the ability to retarget the design for improved power and performance

Elastic systems

Elastic systems provide tolerance to the variations in computation and communication delays. The incorporation of elasticity opens new opportunities for optimization using new correct-by-construction transformations that cannot be applied to rigid non-elastic systems. The basics of synchronous and asynchronous elastic systems will be reviewed. A set of behavior-preserving transformations will be presented: retiming, recycling, early evaluation, variable-latency units and speculative execution. The application of these transformations for performance and power optimization will be discussed. Finally, a novel framework for microarchitectural exploration will be introduced, showing that the optimal pipelining of a circuit can be automatically obtained by using the previous transformations.Peer ReviewedPostprint (published version

Technology Mapping for Circuit Optimization Using Content-Addressable Memory

The growing complexity of Field Programmable Gate Arrays (FPGA's) is leading to architectures with high input cardinality look-up tables (LUT's). This thesis describes a methodology for area-minimizing technology mapping for combinational logic, specifically designed for such FPGA architectures. This methodology, called LURU, leverages the parallel search capabilities of Content-Addressable Memories (CAM's) to outperform traditional mapping algorithms in both execution time and quality of results. The LURU algorithm is fundamentally different from other techniques for technology mapping in that LURU uses textual string representations of circuit topology in order to efficiently store and search for circuit patterns in a CAM. A circuit is mapped to the target LUT technology using both exact and inexact string matching techniques. Common subcircuit expressions (CSE's) are also identified and used for architectural optimization---a small set of CSE's is shown to effectively cover an average of 96% of the test circuits. LURU was tested with the ISCAS'85 suite of combinational benchmark circuits and compared with the mapping algorithms FlowMap and CutMap. The area reduction shown by LURU is, on average, 20% better compared to FlowMap and CutMap. The asymptotic runtime complexity of LURU is shown to be better than that of both FlowMap and CutMap

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability