A Method for Skew-free Distribution of Digital Signals Using Matched Variable Delay Lines

The ability to distribute signals everywhere in a circuit with controlled and known delays is essential in large, high-speed digital systems. We present a technique by which a signal driver can adjust the arrival time of the signal at the end of the wire using a pair of matched variable delay lines. We show an implemention of this idea requiring no extra wiring, and how it can be extended to distribute signals skew-free to receivers along the signal run. We demonstrate how this scheme fits into the boundary scan logic of a VLSI chip

High bandwidth interchip communication for regular networks dc by Rajeevan Amirtharajah.

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1994.Includes bibliographical references (leaves 48-49).M.Eng

High-performance and Low-power Clock Network Synthesis in the Presence of Variation.

Semiconductor technology scaling requires continuous evolution of all aspects of physical design of integrated circuits. Among the major design steps, clock-network synthesis has been greatly affected by technology scaling, rendering existing methodologies inadequate. Clock routing was previously sufficient for smaller ICs, but design difficulty and structural complexity have greatly increased as interconnect delay and clock frequency increased in the 1990s. Since a clock network directly influences IC performance and often consumes a substantial portion of total power, both academia and industry developed synthesis methodologies to achieve low skew, low power and robustness from PVT variations. Nevertheless, clock network synthesis under tight constraints is currently the least automated step in physical design and requires significant manual intervention, undermining turn-around-time. The need for multi-objective optimization over a large parameter space and the increasing impact of process variation make clock network synthesis particularly challenging. Our work identifies new objectives, constraints and concerns in the clock-network synthesis for systems-on-chips and microprocessors. To address them, we generate novel clock-network structures and propose changes in traditional physical-design flows. We develop new modeling techniques and algorithms for clock power optimization subject to tight skew constraints in the presence of process variations. In particular, we offer SPICE-accurate optimizations of clock networks, coordinated to reduce nominal skew below 5 ps, satisfy slew constraints and trade-off skew, insertion delay and power, while tolerating variations. To broaden the scope of clock-network-synthesis optimizations, we propose new techniques and a methodology to reduce dynamic power consumption by 6.8%-11.6% for large IC designs with macro blocks by integrating clock network synthesis within global placement. We also present a novel non-tree topology that is 2.3x more power-efficient than mesh structures. We fuse several clock trees to create large-scale redundancy in a clock network to bridge the gap between tree-like and mesh-like topologies. Integrated optimization techniques for high-quality clock networks described in this dissertation strong empirical results in experiments with recent industry-released benchmarks in the presence of process variation. Our software implementations were recognized with the first-place awards at the ISPD 2009 and ISPD 2010 Clock-Network Synthesis Contests organized by IBM Research and Intel Research.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/89711/1/ejdjsy_1.pd

Energy-Efficient Neural Network Architectures

Emerging systems for artificial intelligence (AI) are expected to rely on deep neural networks (DNNs) to achieve high accuracy for a broad variety of applications, including computer vision, robotics, and speech recognition. Due to the rapid growth of network size and depth, however, DNNs typically result in high computational costs and introduce considerable power and performance overheads. Dedicated chip architectures that implement DNNs with high energy efficiency are essential for adding intelligence to interactive edge devices, enabling them to complete increasingly sophisticated tasks by extending battery lie. They are also vital for improving performance in cloud servers that support demanding AI computations. This dissertation focuses on architectures and circuit technologies for designing energy-efficient neural network accelerators. First, a deep-learning processor is presented for achieving ultra-low power operation. Using a heterogeneous architecture that includes a low-power always-on front-end and a selectively-enabled high-performance back-end, the processor dynamically adjusts computational resources at runtime to support conditional execution in neural networks and meet performance targets with increased energy efficiency. Featuring a reconfigurable datapath and a memory architecture optimized for energy efficiency, the processor supports multilevel dynamic activation of neural network segments, performing object detection tasks with 5.3x lower energy consumption in comparison with a static execution baseline. Fabricated in 40nm CMOS, the processor test-chip dissipates 0.23mW at 5.3 fps. It demonstrates energy scalability up to 28.6 TOPS/W and can be configured to run a variety of workloads, including severely power-constrained ones such as always-on monitoring in mobile applications. To further improve the energy efficiency of the proposed heterogeneous architecture, a new charge-recovery logic family, called zero-short-circuit current (ZSCC) logic, is proposed to decrease the power consumption of the always-on front-end. By relying on dedicated circuit topologies and a four-phase clocking scheme, ZSCC operates with significantly reduced short-circuit currents, realizing order-of-magnitude power savings at relatively low clock frequencies (in the order of a few MHz). The efficiency and applicability of ZSCC is demonstrated through an ANSI S1.11 1/3 octave filter bank chip for binaural hearing aids with two microphones per ear. Fabricated in a 65nm CMOS process, this charge-recovery chip consumes 13.8µW with a 1.75MHz clock frequency, achieving 9.7x power reduction per input in comparison with a 40nm monophonic single-input chip that represents the published state of the art. The ability of ZSCC to further increase the energy efficiency of the heterogeneous neural network architecture is demonstrated through the design and evaluation of a ZSCC-based front-end. Simulation results show 17x power reduction compared with a conventional static CMOS implementation of the same architecture.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147614/1/hsiwu_1.pd

Design of variation-tolerant synchronizers for multiple clock and voltage domains

PhD ThesisParametric variability increasingly affects the performance of electronic circuits as the fabrication technology has reached the level of 32nm and beyond. These parameters may include transistor Process parameters (such as threshold voltage), supply Voltage and Temperature (PVT), all of which could have a significant impact on the speed and power consumption of the circuit, particularly if the variations exceed the design margins. As systems are designed with more asynchronous protocols, there is a need for highly robust synchronizers and arbiters. These components are often used as interfaces between communication links of different timing domains as well as sampling devices for asynchronous inputs coming from external components. These applications have created a need for new robust designs of synchronizers and arbiters that can tolerate process, voltage and temperature variations. The aim of this study was to investigate how synchronizers and arbiters should be designed to tolerate parametric variations. All investigations focused mainly on circuit-level and transistor level designs and were modeled and simulated in the UMC90nm CMOS technology process. Analog simulations were used to measure timing parameters and power consumption along with a “Monte Carlo” statistical analysis to account for process variations. Two main components of synchronizers and arbiters were primarily investigated: flip-flop and mutual-exclusion element (MUTEX). Both components can violate the input timing conditions, setup and hold window times, which could cause metastability inside their bistable elements and possibly end in failures. The mean-time between failures is an important reliability feature of any synchronizer delay through the synchronizer. The MUTEX study focused on the classical circuit, in addition to a number of tolerance, based on increasing internal gain by adding current sources, reducing the capacitive loading, boosting the transconductance of the latch, compensating the existing Miller capacitance, and adding asymmetry to maneuver the metastable point. The results showed that some circuits had little or almost no improvements, while five techniques showed significant improvements by reducing τ and maintaining high tolerance. Three design approaches are proposed to provide variation-tolerant synchronizers. wagging synchronizer proposed to First, the is significantly increase reliability over that of the conventional two flip-flop synchronizer. The robustness of the wagging technique can be enhanced by using robust τ latches or adding one more cycle of synchronization. The second approach is the Metastability Auto-Detection and Correction (MADAC) latch which relies on swiftly detecting a metastable event and correcting it by enforcing the previously stored logic value. This technique significantly reduces the resolution time down from uncertain synchronization technique is proposed to transfer signals between Multiple- Voltage Multiple-Clock Domains (MVD/MCD) that do not require conventional level-shifters between the domains or multiple power supplies within each domain. This interface circuit uses a synchronous set and feedback reset protocol which provides level-shifting and synchronization of all signals between the domains, from a wide range of voltage-supplies and clock frequencies. Overall, synchronizer circuits can tolerate variations to a greater extent by employing the wagging technique or using a MADAC latch, while MUTEX tolerance can suffice with small circuit modifications. Communication between MVD/MCD can be achieved by an asynchronous handshake without a need for adding level-shifters.The Saudi Arabian Embassy in London, Umm Al-Qura University, Saudi Arabi

Design and automation of voltage-scaled clock networks

In this dissertation, a vital step of VLSI physical design flow, synthesis of clock distribution networks, is investigated. Clock network synthesis (CNS) involves large and complex optimization problems to achieve high performance and low power demands of current integrated circuits (ICs). Ineffectiveness of existing methodologies to provide high performance at lower voltage nodes is the main driver for this dissertation research. A design and automation flow for voltage-scaled clock networks is proposed to satisfy tight timing constraints at high frequency (for high performance) and low voltage (for low power) operation. One implementation of voltage-scaled clock networks is low (voltage) swing clocking, which is a known technique, yet its applicability remains limited to designs with low performance demands. In this dissertation, novel methodologies are introduced to i) apply low swing clocking to legacy designs as a power saving methodology, ii) develop a complete CNS flow for low swing clocking of high performance ICs. These methodologies include slew-driven approaches that are better suited to future transistor and interconnect technologies. Second implementation of voltage-scaled clock networks is multi-voltage clocking, which is another known technique, yet its applicability remains limited to clock tree topology. In this dissertation, multi-voltage clocking with a clock mesh topology is investigated in order to address a missing aspect in the current IC design flows. Practical considerations of the current IC design flows are also investigated in this dissertation to expand the applicability of the proposed CNS flow. A novel methodology is introduced to facilitate clock gating within low swing clocking. The applicability of low swing clocking to FinFET technology, which is currently the industry norm, is shown to be effective.Ph.D., Electrical Engineering -- Drexel University, 201

Center for Aeronautics and Space Information Sciences

This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets