Size-Based Flow Scheduling in a CICQ Switch

In the context of flow-aware networking, size-based (SB) scheduling policies have been shown to improve response times of small flows, without degrading the performance of large flows. But these differentiating policies are designed for Output-queued (OQ) switch architecture, which is known to have scalability issues. On the other hand, the buffered-crossbar (BX) switch architecture is currently being pursued as a potential next-generation scalable switch architecture. This work looks into the problem of performing SB scheduling in BX switches. In particular, the design goals, with respect to each output port, are (i) to transmit high-priority packet(s) as long as there is at least one present, and (ii) to respect the FIFO order among high-priority packets. In this direction, we propose a CICQ switches using a single PIFO queue at each crosspoint to schedule packets according to the priority assigned. pCICQ-1 switch uses a simple design to guarantee that packet-priorities are respected once they are in the crosspoint queues. But it does not maintain the FIFO order of high-priority packets, besides letting a bounded number low-priority packets to depart through an output, when there are one or more high-priority packets for the same output. To solve this, we propose an enhancement in pCICQ-2 switch, that uses a sequence controller to respect packet-priorities as well as arrival order for high-priority packets

Characterization of the Burst Stabilization Protocol for the RR/RR CICQ Switch

Input buffered switches with Virtual Output Queueing (VOQ) can be unstable when presented with unbalanced loads. Existing scheduling algorithms, including iSLIP for Input Queued (IQ) switches and Round Robin (RR) for Combined Input and Crossbar Queued (CICQ) switches, exhibit instability for some schedulable loads. We investigate the use of a queue length threshold and bursting mechanism to achieve stability without requiring internal speed-up. An analytical model is developed to prove that the burst stabilization protocol achieves stability and to predict the minimum burst value needed as a function of offered load. The analytical model is shown to have very good agreement with simulation results. These results show the advantage of the RR/RR CICQ switch as a contender for the next generation of high-speed switches.Comment: Presented at the 28th Annual IEEE Conference on Local Computer Networks (LCN), Bonn/Konigswinter, Germany, Oct 20-24, 200

Efficient Variable Length Block Switching Mechanism

Most popular and widely used packet switch architecture is the crossbar. Its attractive characteristics are simplicity, non-blocking and support for simultaneous multiple packet transmission across the switch. The special version of crossbar switch is Combined Input Crossbar Queue (CICQ) switch. It overcomes the limitations of un-buffered crossbar by employing buffers at each crosspoint in addition to buffering at each input port. Adoption of Crosspoint Buffer (CB) simplifies the scheduling complexity and adapts the distributed nature of scheduling. As a result, matching operation is not needed. Moreover, it supports variable length packets transmission without segmentation. Native switching of variable length packet transmission results in unfairness. To overcome this unfairness, Fixed Length Block Transfer mechanism has been proposed. It has the following drawbacks: (a) Fragmented packets are reassembled at the Crosspoint Buffer (CB). Hence, minimum buffer requirement at each crosspoint is twice the maximum size of the block. When number of ports are more, existence of such a switch is infeasible, due to the restricted memory available in switch core. (b) Reassembly circuit at each crosspoint adds the cost of the switch. (c) Packet is eligible to transfer from CB to output only when the entire packet arrives at the CB, which increases the latency of the fragmented packet in the switch. To overcome these drawbacks, this paper presents Variable Length Block Transfer mechanism. It does not require internal speedup, segmentation and reassembly circuits. Using simulation it is shown that proposed mechanism is superior to Fixed Length Block Transfer mechanism in terms of delay and throughput

Host and Network Optimizations for Performance Enhancement and Energy Efficiency in Data Center Networks

Modern data centers host hundreds of thousands of servers to achieve economies of scale. Such a huge number of servers create challenges for the data center network (DCN) to provide proportionally large bandwidth. In addition, the deployment of virtual machines (VMs) in data centers raises the requirements for efficient resource allocation and find-grained resource sharing. Further, the large number of servers and switches in the data center consume significant amounts of energy. Even though servers become more energy efficient with various energy saving techniques, DCN still accounts for 20% to 50% of the energy consumed by the entire data center. The objective of this dissertation is to enhance DCN performance as well as its energy efficiency by conducting optimizations on both host and network sides. First, as the DCN demands huge bisection bandwidth to interconnect all the servers, we propose a parallel packet switch (PPS) architecture that directly processes variable length packets without segmentation-and-reassembly (SAR). The proposed PPS achieves large bandwidth by combining switching capacities of multiple fabrics, and it further improves the switch throughput by avoiding padding bits in SAR. Second, since certain resource demands of the VM are bursty and demonstrate stochastic nature, to satisfy both deterministic and stochastic demands in VM placement, we propose the Max-Min Multidimensional Stochastic Bin Packing (M3SBP) algorithm. M3SBP calculates an equivalent deterministic value for the stochastic demands, and maximizes the minimum resource utilization ratio of each server. Third, to provide necessary traffic isolation for VMs that share the same physical network adapter, we propose the Flow-level Bandwidth Provisioning (FBP) algorithm. By reducing the flow scheduling problem to multiple stages of packet queuing problems, FBP guarantees the provisioned bandwidth and delay performance for each flow. Finally, while DCNs are typically provisioned with full bisection bandwidth, DCN traffic demonstrates fluctuating patterns, we propose a joint host-network optimization scheme to enhance the energy efficiency of DCNs during off-peak traffic hours. The proposed scheme utilizes a unified representation method that converts the VM placement problem to a routing problem and employs depth-first and best-fit search to find efficient paths for flows

Providing flow based performance guarantees for buffered crossbar switches

Buffered crossbar switches are a special type of com-bined input-output queued switches with each crosspoint of the crossbar having small on-chip buffers. The introduc-tion of crosspoint buffers greatly simplifies the scheduling process of buffered crossbar switches, and furthermore en-ables buffered crossbar switches with speedup of two to eas-ily provide port based performance guarantees. However, recent research results have indicated that, in order to pro-vide flow based performance guarantees, buffered crossbar switches have to either increase the speedup of the cross-bar to three or greatly increase the total number of cross-point buffers, both adding significant hardware complexity. In this paper, we present scheduling algorithms for buffered crossbar switches to achieve flow based performance guar-antees with speedup of two and with only one or two buffers at each crosspoint. When there is no crosspoint blocking in a specific time slot, only the simple and distributed in-put scheduling and output scheduling are necessary. Other-wise, the special urgent matching is introduced to guarantee the on-time delivery of crosspoint blocked cells. With the proposed algorithms, buffered crossbar switches can pro-vide flow based performance guarantees by emulating push-in-first-out output queued switches, and we use the counting method to formally prove the perfect emulation. For the special urgent matching, we present sequential and paral-lel matching algorithms. Both algorithms converge with N iterations in the worst case, and the latter needs less itera-tions in the average case. Finally, we discuss an alternative backup-buffer implementation scheme to the bypass path, and compare our algorithms with existing algorithms in the literature

Scheduling in Networks with Limited Buffers

In networks with limited buffer capacity, packet loss can occur at a link even when the average packet arrival rate is low compared to the link's speed. To offer strong loss-rateguarantees, ISPs may need to adopt stringent routing constraints to limit the load at the network links and the routing path length. However, to simultaneously maximize revenue, ISPs should be interested in scheduling algorithms that lead to the least stringent routing constraints. This work attempts to address the ISPs needs as follows. First, by proposing an algorithm that performs well (in terms of routing constraints) on networks of output queued (OQ) routers (that is, ideal routers), and second, by bounding the extra switch fabric speed and buffer capacity required for the emulationof these algorithms in combined input-output queued (CIOQ) routers.The first part of the thesis studies the problem of minimizing the maximum session loss rate in networks of OQ routers. It introduces the Rolling Priority algorithm, a local online scheduling algorithm that offers superior loss guarantees compared to FCFS/Drop Tail and FCFS/Random Drop. Rolling Priority has the following properties: (1) it does not favor any sessions over others at any link, (2) it ensures a proportion of packets from each session are subject to a negligibly small loss probability at every link along the session's path, and (3) maximizes the proportion of packets subject to negligible loss probability. The second part of the thesis studies the emulation of OQ routers using CIOQ. The OQ routers are equipped with a buffer of capacity B packets at every output. For the family of work-conserving scheduling algorithms, we find that whereas every greedy CIOQ policy is valid for the emulation of every OQ algorithm at speedup B, no CIOQ policy is valid at speedup less than the cubic root of B-2 when preemption is allowed. We also find that CCF, a well-studied CIOQ policy, is not valid at any speedup less than B. We then introduce a CIOQ policy CEH, that is valid at speedup greater than the square root of 2(B-1)