Reproducibility of coronary artery diameter assessments in magnetic resonance coronary angiography: phantom study

This report describes the development of a deformable model for the automatic delineation of coronary artery cross-sectional areas with magnetic resonance imaging. The method is validated with coronary artery phantoms of varying diameters and images with different levels of signal-to-noise ratios. The reproducibility of the technique was examined with simulated geometrical shifts and motions during data acquisition. The experimental results indicate a very high reproducibility and low inter-observers variability of the technique, suggesting its suitability for non-invasive assessment of serial changes of vessel dilatation following pharmacological intervention

Quantification of atherosclerotic plaque in the elderly with positron emission tomography/computed tomography

L'athérosclérose est une maladie cardiovasculaire inflammatoire qui est devenue la première cause de morbidité et de mortalité dans les pays développés et parmi les principales causes d’invalidité au monde. Elle se caractérise par l’épaississement de la paroi vasculaire artérielle suite à l'accumulation de lipides et le dépôt d'autres substances au niveau de l’intima (endothélium) pour former la plaque d’athérome. Avec l'âge, cette plaque peut grossir, se calcifier et ainsi rétrécir le calibre de l'artère pour diminuer son débit et à un stade avancé de la maladie, elle peut se rompre et obstruer les petites artères dans n'importe quelle partie du corps causant des complications aigues, y compris la mort soudaine. L'objectif de cette thèse est de pouvoir détecter l'inflammation de la plaque athérosclérotique quantitativement avec la TEP/TDM dans le but de prévenir son détachement. Les mesures avec la TDM et la TEP avec le 18F-FDG ont été acquises chez des sujets humains âgés de 65 à 85 ans. Des analyses quantitatives ont été conduites sur les images de TDM en fonction de l'intensité et des étendues des calcifications, et sur les images de la TEP pour évaluer le métabolisme des plaques. L'effet des traitements par les statines a aussi été étudié. Au-delà la couverture de cette étude de façon détaillée au niveau physiologique en corrélant différents paramètres des plaques, et au niveau méthodologique en utilisant de nouvelles approches pour l'analyse pharmacocinétique, il en ressort principalement la suggestion de la détection de la vulnérabilité de la plaque artérielle par la TDM, plus disponible et moins coûteuse, en remplacement des analyses biochimiques, surtout la protéine C-réactive (CRP) considérée être la méthode standard.Abstract : Atherosclerosis is an inflammatory cardiovascular disease considered the leading cause of morbidity and mortality in developed countries and among the leading causes of disability worldwide. It is characterized by the thickening of the arterial vascular wall due to the accumulation of lipids and the deposition of other substances in the intima (endothelium) to form atheroma plaque. With age, this plaque can grow larger, calcify and thus narrow the size of the artery to decrease blood flow and at an advanced stage of the disease, it can rupture, be transported by blood and block the small arteries in any part of the body causing acute complications, including sudden death. The objective of this thesis was to be able to detect the inflammation of the atherosclerotic plaque quantitatively with PET/CT in order to prevent its detachment. Measurements with CT and PET with 18F-FDG were acquired in human subjects aged 65 to 85 years. Quantitative analyzes were performed on CT images based on the intensity and extent of calcifications, and on PET images to assess plaque metabolism. The effect of statin treatments has also been studied. Beyond the coverage of this study in a detailed manner at the physiological level by correlating different parameters of the plaques, and at the methodological level by using new approaches for pharmacokinetic analysis, it mainly emerges the suggestion for the detection of the vulnerability of the arterial plaque by CT alone, more available and less expensive, replacing biochemical analyzes, especially Creactive protein (CRP) considered to be the standard method

Vascular Segmentation Algorithms for Generating 3D Atherosclerotic Measurements

Atherosclerosis manifests as plaques within large arteries of the body and remains as a leading cause of mortality and morbidity in the world. Major cardiovascular events may occur in patients without known preexisting symptoms, thus it is important to monitor progression and regression of the plaque burden in the arteries for evaluating patient\u27s response to therapy. In this dissertation, our main focus is quantification of plaque burden from the carotid and femoral arteries, which are major sites for plaque formation, and are straight forward to image noninvasively due to their superficial location. Recently, 3D measurements of plaque burden have shown to be more sensitive to the changes of plaque burden than one-/two-dimensional measurements. However, despite the advancements of 3D noninvasive imaging technology with rapid acquisition capabilities, and the high sensitivity of the 3D plaque measurements of plaque burden, they are still not widely used due to the inordinate amount of time and effort required to delineate artery walls plus plaque boundaries to obtain 3D measurements from the images. Therefore, the objective of this dissertation is developing novel semi-automated segmentation methods to alleviate measurement burden from the observer for segmentation of the outer wall and lumen boundaries from: (1) 3D carotid ultrasound (US) images, (2) 3D carotid black-blood magnetic resonance (MR) images, and (3) 3D femoral black-blood MR images. Segmentation of the carotid lumen and outer wall from 3DUS images is a challenging task due to low image contrast, for which no method has been previously reported. Initially, we developed a 2D slice-wise segmentation algorithm based on the level set method, which was then extended to 3D. The 3D algorithm required fewer user interactions than manual delineation and the 2D method. The algorithm reduced user time by ≈79% (1.72 vs. 8.3 min) compared to manual segmentation for generating 3D-based measurements with high accuracy (Dice similarity coefficient (DSC)\u3e90%). Secondly, we developed a novel 3D multi-region segmentation algorithm, which simultaneously delineates both the carotid lumen and outer wall surfaces from MR images by evolving two coupled surfaces using a convex max-flow-based technique. The algorithm required user interaction only on a single transverse slice of the 3D image for generating 3D surfaces of the lumen and outer wall. The algorithm was parallelized using graphics processing units (GPU) to increase computational speed, thus reducing user time by 93% (0.78 vs. 12 min) compared to manual segmentation. Moreover, the algorithm yielded high accuracy (DSC \u3e 90%) and high precision (intra-observer CV \u3c 5.6% and inter-observer CV \u3c 6.6%). Finally, we developed and validated an algorithm based on convex max-flow formulation to segment the femoral arteries that enforces a tubular shape prior and an inter-surface consistency of the outer wall and lumen to maintain a minimum separation distance between the two surfaces. The algorithm required the observer to choose only about 11 points on its medial axis of the artery to yield the 3D surfaces of the lumen and outer wall, which reduced the operator time by 97% (1.8 vs. 70-80 min) compared to manual segmentation. Furthermore, the proposed algorithm reported DSC greater than 85% and small intra-observer variability (CV ≈ 6.69%). In conclusion, the development of robust semi-automated algorithms for generating 3D measurements of plaque burden may accelerate translation of 3D measurements to clinical trials and subsequently to clinical care

Deep Learning in Cardiology

The medical field is creating large amount of data that physicians are unable to decipher and use efficiently. Moreover, rule-based expert systems are inefficient in solving complicated medical tasks or for creating insights using big data. Deep learning has emerged as a more accurate and effective technology in a wide range of medical problems such as diagnosis, prediction and intervention. Deep learning is a representation learning method that consists of layers that transform the data non-linearly, thus, revealing hierarchical relationships and structures. In this review we survey deep learning application papers that use structured data, signal and imaging modalities from cardiology. We discuss the advantages and limitations of applying deep learning in cardiology that also apply in medicine in general, while proposing certain directions as the most viable for clinical use.Comment: 27 pages, 2 figures, 10 table

Quantitative imaging in cardiovascular CT angiography

In de afgelopen decennia is computertomografie (CT) een prominente niet-invasieve modaliteit om hart- en vaatziekten te evalueren geworden. Dit proefschrift heeft als doel de rol van CT in de therapeutische behandeling van coronaire hartziekte (CAD) en klepaandoeningen te onderzoeken.De relatie tussen kransslagadergeometrie (statisch en dynamisch) en aanwezigheid en omvang van CAD met CT werd onderzocht. De resultaten suggereren dat de statische geometrie van de kransslagader significant gerelateerd is aan de aanwezigheid van plaque en stenose. Er was echter geen verband tussen dynamische verandering van de coronaire arterie-geometrie en de ernst van CAD. Een algoritme om de invloed van intraluminair contrastmiddel op niet-verkalkte atherosclerotische plaque Hounsfield-Unit-waarden te corrigeren werd gepresenteerd en gevalideerd met behulp van fantomen.Diagnose en operatieplanning kunnen cruciale gevolgen hebben voor de klinische uitkomst van chirurgische ingrepen. In dit proefschrift wordt beschreven dat halfautomatische softwareprogramma’s het kwantificeren van het aortaklepgebied betere reproduceerbare resultaten toonden in vergelijking met handmatige metingen, en vergelijkbare resultaten met de huidige gouden standaard, de echocardiografie. Een systematische review over het dynamische gedrag van de aorta-annulus toont aan dat de vorm van de aorta-annulus tijdens de hartcyclus verandert, wat impliceert dat er bij het bepalen van een prothese rekening moet worden gehouden met meerdere fasen. Een andere review beschrijft het gebruik van 3D-printen in de chirurgische planning samen met andere toepassingen voor de behandeling van hartklepaandoeningen.CT is de belangrijkste beeldvormingsmodaliteit in deze onderzoeken, die gericht waren op de therapeutische behandeling van hart- en vaatziekten, van vroege risicobepaling tot diagnose en chirurgische planning.In the recent decades computed tomography (CT) has emerged as a dominant non-invasive modality to evaluate cardiovascular diseases. This thesis aimed to explore the role of CT in the therapeutic management of coronary artery disease (CAD) and valvular diseases.The relationship between both static and dynamic coronary artery geometry and presence and extent of CAD using CT was investigated. The results suggest that the static coronary artery geometry is significantly related to presence of plaque and significant stenosis. However, there were no such relationship between dynamic change of coronary artery geometry and severity of CAD. As part of this thesis an algorithm to correct the influence of lumen contrast enhancement on non-calcified atherosclerotic plaque Hounsfield-Unit values was presented. The algorithm was validated using phantoms. The diagnosis and surgical planning may have crucial impact on clinical outcome. Semi-automatic software for aortic valve area quantification presented in this thesis was proven to be more repeatable and similar to gold standard echocardiography in comparison to manual measurements. The systematic review regarding the dynamic behavior of aortic annulus revealed that aortic annulus geometry changes throughout the cardiac cycle which implies that multiple phases should be taken into account for prosthesis sizing. Another review in this thesis discusses the use of 3D printing in the surgical planning along with other applications for the treatment of valvular diseases.CT is the main imaging modality in these studies which were focused on the therapeutic management of cardiovascular diseases from early risk determination to diagnosis and surgical planning

Carotid Artery Wall Imaging: Perspective and Guidelines from the ASNR Vessel Wall Imaging Study Group and Expert Consensus Recommendations of the American Society of Neuroradiology

SUMMARY: Identification of carotid artery atherosclerosis is conventionally based on measurements of luminal stenosis and surface irregularities using in vivo imaging techniques including sonography, CT and MR angiography, and digital subtraction angiography. However, histopathologic studies demonstrate considerable differences between plaques with identical degrees of stenosis and indicate that certain plaque features are associated with increased risk for ischemic events. The ability to look beyond the lumen using highly developed vessel wall imaging methods to identify plaque vulnerable to disruption has prompted an active debate as to whether a paradigm shift is needed to move away from relying on measurements of luminal stenosis for gauging the risk of ischemic injury. Further evaluation in randomized clinical trials will help to better define the exact role of plaque imaging in clinical decision-making. However, current carotid vessel wall imaging techniques can be informative. The goal of this article is to present the perspective of the ASNR Vessel Wall Imaging Study Group as it relates to the current status of arterial wall imaging in carotid artery disease

In Vivo MRI-Based Three-Dimensional Fluid-Structure Interaction Models and Mechanical Image Analysis for Human Carotid Atherosclerotic Plaques

Introduction. Atherosclerotic plaque rupture may occur without warning leading to severe clinical events such as heart attack and stroke. The mechanisms causing plaque rupture are not well understood. It is hypothesized that mechanical forces may play an important role in the plaque rupture process and that image-based computational mechanical analysis may provide useful information for more accurate plaque vulnerability assessment. The objectives of this dissertation are: a) develop in vivo magnetic resonance imaging (MRI)-based 3D computational models with fluid-structure Interactions (FSI) for human atherosclerotic carotid plaques; b) perform mechanical analysis using 3D FSI models to identify critical stress/strain conditions which may be used for possible plaque rupture predictions. Data, Model, and Methods. Histological, ex vivo/ in vivo MRI data of human carotid plaques were provided by the University of Washington Medical School and Washington University Medical School. Blood flow was assumed to be laminar, Newtonian, viscous and incompressible. The Navier-Stokes equations with arbitrary Lagrangian-Eulerian (ALE) formulation were used as the governing equations for the flow model. The vessel and plaque components were assumed to be hyperelastic, isotropic, nearly-incompressible and homogeneous. The nonlinear Mooney-Rivlin model was used to describe the nonlinear properties of the materials with parameter values chosen to match available experimental data. The fully-coupled FSI models were solved by a commercial finite element software ADINA to obtain full 3D flow and stress/strain distributions for analysis. Validation of the computational models and Adina software were provided by comparing computational solutions with analytic solutions and experimental data. Several novel methods were introduced to address some fundamental issues for construction of in vivo MRI-based 3D FSI models: a) an automated MRI segmentation technique using a Bayes theorem with normal probability distribution was implemented to obtain plaque geometry with enclosed components; b) a pre-shrink process was introduced to shrink the in vivo MRI geometry to obtain the no-load shape of the plaque; c) a Volume Component-Fitting Method was introduced to generate a 3D computational mesh for the plaque model with deformable complex geometry, FSI and inclusions; d) a method using MRI data obtained under in vitro pressurized conditions was introduced to determine vessel material properties. Results. The effects of material properties on flow and wall stress/strain behaviors were evaluated. The results indicate that a 100% stiffness increase may decrease maximal values of maximum principal stress (Stress-P1) and maximum principal strain (Strain-P1) by about 20% and 40%, respectively; flow Maximum-Shear-Stress (FMSS) and flow velocity did not show noticeable changes. By comparing ex vivo and in vivo data of 10 plaque samples, the average axial (25%) and inner circumferential (7.9%) shrinkages of the plaques between loaded and unloaded state were obtained. Effects of the shrink-stretch process on plaque stress/strain distributions were demonstrated based on six adjusted 3D FSI models with different shrinkages. Stress-P1 and Strain-P1 increased 349.8% and 249% respectively with 33% axial stretch. The effects of a lipid-rich necrotic core and fibrous cap thickness on structure/flow behaviors were investigated. The mean values of wall Stress-P1 and Strain-P1 from lipid nodes from a ruptured plaque were significantly higher than those from a non-ruptured plaque (112.3 kPa, 0.235 & 80.1 kPa, 0.185), which was 40.2% and 26.8% higher, respectively (p\u3c0.001). High stress/strain concentrations were found at the thin fibrous cap regions. These results indicate that high stress concentrations and thin fibrous cap thickness might be critical indicators for plaque vulnerability. Conclusion. In vivo image-based 3D FSI models and mechanical image analysis may have the potential to provide quantitative risk indicators for plaque vulnerability assessment