Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

Self-Partial and Dynamic Reconfiguration Implementation for AES using FPGA

This paper addresses efficient hardware/software implementation approaches for the AES (Advanced Encryption Standard) algorithm and describes the design and performance testing algorithm for embedded system. Also, with the spread of reconfigurable hardware such as FPGAs (Field Programmable Gate Array) embedded cryptographic hardware became cost-effective. Nevertheless, it is worthy to note that nowadays, even hardwired cryptographic algorithms are not so safe. From another side, the self-reconfiguring platform is reported that enables an FPGA to dynamically reconfigure itself under the control of an embedded microprocessor. Hardware acceleration significantly increases the performance of embedded systems built on programmable logic. Allowing a FPGA-based MicroBlaze processor to self-select the coprocessors uses can help reduce area requirements and increase a system's versatility. The architecture proposed in this paper is an optimal hardware implementation algorithm and takes dynamic partially reconfigurable of FPGA. This implementation is good solution to preserve confidentiality and accessibility to the information in the numeric communication

CIDPro: Custom Instructions for Dynamic Program Diversification

Timing side-channel attacks pose a major threat to embedded systems due to their ease of accessibility. We propose CIDPro, a framework that relies on dynamic program diversification to mitigate timing side-channel leakage. The proposed framework integrates the widely used LLVM compiler infrastructure and the increasingly popular RISC-V FPGA soft-processor. The compiler automatically generates custom instructions in the security critical segments of the program, and the instructions execute on the RISC-V custom co-processor to produce diversified timing characteristics on each execution instance. CIDPro has been implemented on the Zynq7000 XC7Z020 FPGA device to study the performance overhead and security tradeoffs. Experimental results show that our solution can achieve 80% and 86% timing side-channel capacity reduction for two benchmarks with an acceptable performance overhead compared to existing solutions. In addition, the proposed method incurs only a negligible hardware area overhead of 1% slices of the entire RISC-V system

Implementing a protected zone in a reconfigurable processor for isolated execution of cryptographic algorithms

We design and realize a protected zone inside a reconfigurable and extensible embedded RISC processor for isolated execution of cryptographic algorithms. The protected zone is a collection of processor subsystems such as functional units optimized for high-speed execution of integer operations, a small amount of local memory, and general and special-purpose registers. We outline the principles for secure software implementation of cryptographic algorithms in a processor equipped with the protected zone. We also demonstrate the efficiency and effectiveness of the protected zone by implementing major cryptographic algorithms, namely RSA, elliptic curve cryptography, and AES in the protected zone. In terms of time efficiency, software implementations of these three cryptographic algorithms outperform equivalent software implementations on similar processors reported in the literature. The protected zone is designed in such a modular fashion that it can easily be integrated into any RISC processor; its area overhead is considerably moderate in the sense that it can be used in vast majority of embedded processors. The protected zone can also provide the necessary support to implement TPM functionality within the boundary of a processor

Crypto Embedded System for Electronic Document

In this paper, a development of low-cost RSA-based Crypto Embedded System targeted for electronic document security is presented. The RSA algorithm is implemented in a re-configurable hardware, in this case Field Programmable Gate Array (FPGA). The 32-bit soft cores of AlteraÂ’s Nios RISC processor is used as the basic building blocks of the proposed complete embedded solutions. AlteraÂ’s SOPC Builder is used to facilitate the development of crypto embedded system, particularly in hardware/software integration stage. The use of Cryptographic Application Programming Interface (CAPI) to bridge the application and the hardware, and the associated communication layer in the embedded system is also discussed. The result obtained shows that the crypto embedded system provides a suitable compromise between the constraints of speed, space and required security level based on the specific demands of targeted applications

SCM : Secure Code Memory Architecture

An increasing number of applications implemented on a SoC (System-on-chip) require security features. This work addresses the issue of protecting the integrity of code and read-only data that is stored in memory. To this end, we propose a new architecture called SCM, which works as a standalone IP core in a SoC. To the best of our knowledge, there exist no architectural elements similar to SCM that offer the same strict security guarantees while, at the same time, not requiring any modifications to other IP cores in its SoC design. In addition, SCM has the flexibility to select the parts of the software to be protected, which eases the integration of our solution with existing software. The evaluation of SCM was done on the Zynq platform which features an ARM processor and an FPGA. The design was evaluated by executing a number of different benchmarks from memory protected by SCM, and we found that it introduces minimal overhead to the system