Cyclic division algebras: a tool for space-time coding

Multiple antennas at both the transmitter and receiver ends of a wireless digital transmission channel may increase both data rate and reliability. Reliable high rate transmission over such channels can only be achieved through Space–Time coding. Rank and determinant code design criteria have been proposed to enhance diversity and coding gain. The special case of full-diversity criterion requires that the difference of any two distinct codewords has full rank. Extensive work has been done on Space–Time coding, aiming at finding fully diverse codes with high rate. Division algebras have been proposed as a new tool for constructing Space–Time codes, since they are non-commutative algebras that naturally yield linear fully diverse codes. Their algebraic properties can thus be further exploited to improve the design of good codes. The aim of this work is to provide a tutorial introduction to the algebraic tools involved in the design of codes based on cyclic division algebras. The different design criteria involved will be illustrated, including the constellation shaping, the information lossless property, the non-vanishing determinant property, and the diversity multiplexing trade-off. The final target is to give the complete mathematical background underlying the construction of the Golden code and the other Perfect Space–Time block codes

Multidimensional Optimized Optical Modulation Formats

This chapter overviews the relatively large body of work (experimental and theoretical) on modulation formats for optical coherent links. It first gives basic definitions and performance metrics for modulation formats that are common in the literature. Then, the chapter discusses optimization of modulation formats in coded systems. It distinguishes between three cases, depending on the type of decoder employed, which pose quite different requirements on the choice of modulation format. The three cases are soft-decision decoding, hard-decision decoding, and iterative decoding, which loosely correspond to weak, medium, and strong coding, respectively. The chapter also discusses the realizations of the transmitter and transmission link properties and the receiver algorithms, including DSP and decoding. It further explains how to simply determine the transmitted symbol from the received 4D vector, without resorting to a full search of the Euclidean distances to all points in the whole constellation

OFDM ido tsushin shisutemu ni okeru doitsu chaneru kansho jokyo hoshiki ni kansuru kenkyu

制度:新 ; 報告番号:甲3396号 ; 学位の種類:博士(国際情報通信学) ; 授与年月日:2011/9/15 ; 早大学位記番号:新571

Optimal design of hybrid optical digital imaging systems

Several types of pupil modulation have been reported to decrease the aberration variance of the modulation-transfer-function (MTF) in aberration-tolerant hybrid optical-digital imaging systems. It is common to enforce restorability constraints on the MTF, requiring trade of aberration-tolerance and noise-gain. In this thesis, instead of optimising specific MTF characteristics, the expected imaging-error of the joint design is minimised directly. This method is used to compare commonly used phase-modulation functions. The analysis shows how optimal imaging performance is obtained using moderate phasemodulation, and more importantly, it shows the relative merits of different functions. It is shown that the technique is readily integrable with off-the-shelf optical design software, which is demonstrated with the optimisation of a wide-angle reflective system with significant off-axis aberrations. The imaging error can also be minimised for amplitudeonly masks. It is shown that phase aberrations in an imaging system can be mitigated using binary amplitude masks. This offers a low-cost, transmission-mode alternative to phase correction as used in active and adaptive optics. More efficient masks can be obtained by the optimisation of the imaging fidelity

Space programs summary no. 37-62, volume 2 for the period 1 January - 28 February 1970. The Deep Space Network

Deep Space Network operations revie

Power Electronics Controller Prototyping Tool For Power System Applications

Many types of devices based on power converters have been proposed and studied for utility applications. In recent years most of the control systems for these converters have been digital. Unfortunately, such digital controllers, which are often based on a digital signal processor (DSP), are difficult to model in simulation. Thus, hardware prototypes are usually required. This thesis presents a tool for fast prototyping that helps overcome these difficulties. Namely, a hardware-in-the-loop simulation is provided for the digital controller in order to evaluate control algorithms without the voltage source converter and power system. The controller in the loop design methodology is described and the division between the real-time power system model and the hardware controller with an interface is shown. Also, the modulation type, integration time step selection and synchronization between the controller and the real-time system simulation are discussed. The hardware configuration for the real-time simulator and the software implementation of the simulator is discussed. In this thesis an example application of a shunt active compensator following this formal procedure is presented. The active compensator prototyping was first developed in MATLAB/Simulink. Then, following a formal design procedure, the power system was modeled in a digital simulator and the controller was implemented in a digital controller board. Finally, a hardware-in-the-loop test was carried out to validate the performance of the hardware controller for the active compensator. Although the tools and methods presented here are aimed at shunt connected current controller application, they may be generalized for use in the development of any digitally controlled power electronic converter

Multi-carrier transmission techniques toward flexible and efficient wireless communication systems

制度:新 ; 文部省報告番号:甲2562号 ; 学位の種類:博士(国際情報通信学) ; 授与年月日:2008/3/15 ; 早大学位記番号:新470

Characterisation of noisy speech channels in 2G and 3G mobile networks

As the wireless cellular market reaches competitive levels never seen before, network operators need to focus on maintaining Quality of Service (QoS) a main priority if they wish to attract new subscribers while keeping existing customers satisfied. Speech Quality as perceived by the end user is one major example of a characteristic in constant need of maintenance and improvement. It is in this topic that this Master Thesis project fits in. Making use of an intrusive method of speech quality evaluation, as a means to further study and characterize the performance of speech codecs in second-generation (2G) and third-generation (3G) technologies. Trying to find further correlation between codecs with similar bit rates, along with the exploration of certain transmission parameters which may aid in the assessment of speech quality. Due to some limitations concerning the audio analyzer equipment that was to be employed, a different system for recording the test samples was sought out. Although the new designed system is not standard, after extensive testing and optimization of the system's parameters, final results were found reliable and satisfactory. Tests include a set of high and low bit rate codecs for both 2G and 3G, where values were compared and analysed, leading to the outcome that 3G speech codecs perform better, under the approximately same conditions, when compared with 2G. Reinforcing the idea that 3G is, with no doubt, the best choice if the costumer looks for the best possible listening speech quality. Regarding the transmission parameters chosen for the experiment, the Receiver Quality (RxQual) and Received Energy per Chip to the Power Density Ratio (Ec/N0), these were subject to speech quality correlation tests. Final results of RxQual were compared to those of prior studies from different researchers and, are considered to be of important relevance. Leading to the confirmation of RxQual as a reliable indicator of speech quality. As for Ec/N0, it is not possible to state it as a speech quality indicator however, it shows clear thresholds for which the MOS values decrease significantly. The studied transmission parameters show that they can be used not only for network management purposes but, at the same time, give an expected idea to the communications engineer (or technician) of the end-to-end speech quality consequences. With the conclusion of the work new ideas for future studies come to mind. Considering that the fourth-generation (4G) cellular technologies are now beginning to take an important place in the global market, as the first all-IP network structure, it seems of great relevance that 4G speech quality should be subject of evaluation. Comparing it to 3G, not only in narrowband but also adding wideband scenarios with the most recent standard objective method of speech quality assessment, POLQA. Also, new data found on Ec/N0 tests, justifies further research studies with the intention of validating the assumptions made in this work.Com o mercado das redes móveis a atingir níveis de competitividade nunca antes vistos, existe a crescente necessidade por parte dos operadores de rede em focar-se na Qualidade de Serviço (QoS) como principal prioridade, no sentido de atrair novos clientes ao mesmo tempo que asseguram a satisfação dos seus actuais assinantes. A percepção da Qualidade de Voz, por parte do utilizador, é apenas um exemplo de uma característica de QoS em constante necessidade de manutenção e melhoramento. Sendo nesta temática em que se insere a Tese de Mestrado. Aplicando um método intrusivo de avaliação de qualidade de voz, como meio para um estudo mais aprofundado e, ao mesmo tempo, caracterizando o desempenho dos codecs de voz para as tecnologias de segunda-geração (2G) e terceira-geração (3G). Investigando nova informação que possa ser retirada da correlação entre codecs com bit rates semelhantes, juntamente com a exploração de determinados 'parâmetros de transmissão os quais podem auxiliar na avaliação da qualidade de voz. Devido a algumas limitações ligadas ao analisador de áudio (requisito neste tipo de aplicações), existiu a necessidade de procurar um sistema distinto para gravação das amostras de teste. Embora o sistema escolhido não seja padronizado para este tipo de ensaios, após vários testes e consequente optimização dos parâmetros do sistema, os resultados finais consideram-se credíveis e satisfatórios. Os testes efectuados incluem um conjunto de codecs de elevado e baixo bit rate, onde a comparação e análise dos resultados levam a concluir que codecs de voz 3G têm melhor desempenho, sob aproximadamente as mesmas condições, comparativamente com os 2G. Reforçando a ideia generalizada que 3G é, sem dúvida, a melhor escolha se o utilizador procura uma solução superior a nível de qualidade de voz. No que diz respeito aos parâmetros de transmissão escolhidos para a experiência, RxQual (Qualidade do sinal Recebido pela estacão móvel) e Ec/N0 (razão entre Energia por chip e a Densidade Espectral de Potência), estes foram sujeitos a testes de correlação com a qualidade de voz. Os resultados de RxQual foram sujeitos a comparação com estudos prévios de outros investigadores, confirmando este parâmetro como um indicador de qualidade de voz bastante fiável. Quanto a Ec/N0, não é possível declará-lo como um indicador de qualidade de voz, no entanto, este demonstra limites claros para os quais os valores de Mean Opinion Score (MOS) decrescem significativamente. Os parâmetros de transmissão estudados demonstram não só que podem ser utilizados com objectivos de gestão de rede mas como também podem fornecer, ao engenheiro (ou técnico), informação relativa ao impacto que poderá existir na qualidade de voz. Com a finalização deste trabalho é possível constatar que novos estudos devem ser efectuados. Considerando que a tecnologia de quarta-geração (4G) começa agora a dar os seus primeiros passos no mercado das redes móveis, como a primeira com arquitectura de rede totalmente orientada para IP, parece de grande importância que esta tecnologia seja sujeita a avaliação. Comparando-a com 3G, não só para banda-estreita (300 a 3400 Hz) como também para cenários de banda-larga (50 a 7000Hz), aplicando o mais recente método normalizado de avaliação de qualidade de voz, o POLQA. Por fim, também se verifica como pertinente uma continuação do estudo relativo a Ec/N0 a fim de validar as ilações retiradas neste trabalho

LANDSAT-D data format control book. Volume 5: (Payload)

The LANDSAT-D flight segment payload is the thematic mapper and the multispectral scanner. Narrative and visual descriptions of the LANDSAT-D payload data handling hardware and data flow paths from the sensing instruments through to the GSFC LANDSAT-D data management system are provided. Key subsystems are examined