Integrated dye lasers for all-polymer photonic Lab-on-a-Chip systems

Basierend auf integrierten Farbstofflasern wurden zwei optische Lab-on-a-Chip Systeme entwickelt. Zur effizienten Anregung von Fluoreszenzmarkern wurden optofluidische Farbstofflaser mit verteilter Rückkopplung (DFB Laser) untersucht. Für die markerfreie Moleküldetektion wurden Mikrokelchlaser entwickelt, die auf Flüstergaleriemoden basieren. Besonderes Augenmerk lag auf einer möglichen Großserienfertigung der Chips als kostengünstige Einwegartikel und auf einer einfachen Handhabung

Photonic Crystal Nanobeam Cavities for Biomedical Sensing

Manipulation of light at the nanoscale has the promise to enable numerous technological advances in biomedical sensing, optical communications, nano-mechanics and quantum optics. As photons have vanishingly small interaction cross sections, their interactions have to be mitigated by matters (i.e. quantum emitters, molecules, electrons etc.). Waveguides and cavities are the fundamental building blocks of the optical circuits, which control or confine light to specific matters of interest. The first half of the thesis (Chapters 2 & 3) focuses on how to design various photonic nanostructures to manipulate light on nano- to micro- scale, especially to modify the light-matter interaction properties. Chapter 2 discusses how nano-slot waveguides and photonic crystal nanobeam waveguides are able to modify the emission of quantum emitters, in a different way that normal ridge waveguides are not able to. Chapter 3 focuses on a more complicated and powerful structure: the photonic crystal nanobeam cavity. The design, fabrication and characterization of the photonic crystal nanobeam cavities are described and demonstrated in detail, which lays out the foundation of the biomedical sensing applications in the second half of the thesis. The second half of the thesis (Chapters 4 & 5) focuses on the application of photonic crystal nanobeam cavities in the label-free sensing of biomedical substances. Chapter 4 demonstrates detection of solutions with different refractive index (aceton, methanol, IPA etc.), glucose concentration, single polystyrene nanoparticles and single streptavidin bio-molecules. Chapter 4 proposes a novel nonlinear optical method to further enhance the sensitivity. Chapter 4 also demonstrates high quality nanobeam cavities fabricated in polymers, that open up a new route to decrease the cost, as well as to achieve novel applications with functional polymers. The broader impact of this technology lies in its potential of commercialization of a new generation of biosensors with high sensitivity and high integration. Chapter 5 discusses progresses towards instrumentation of the nanobeam cavity sensing technology for research & development apparatus, as well as point-of-care diagnostic tools.Engineering and Applied Science

A review of silicon subwavelength gratings: building break-through devices with anisotropic metamaterials

Abstract Silicon photonics is playing a key role in areas as diverse as high-speed optical communications, neural networks, supercomputing, quantum photonics, and sensing, which demand the development of highly efficient and compact light-processing devices. The lithographic segmentation of silicon waveguides at the subwavelength scale enables the synthesis of artificial materials that significantly expand the design space in silicon photonics. The optical properties of these metamaterials can be controlled by a judicious design of the subwavelength grating geometry, enhancing the performance of nanostructured devices without jeopardizing ease of fabrication and dense integration. Recently, the anisotropic nature of subwavelength gratings has begun to be exploited, yielding unprecedented capabilities and performance such as ultrabroadband behavior, engineered modal confinement, and sophisticated polarization management. Here we provide a comprehensive review of the field of subwavelength metamaterials and their applications in silicon photonics. We first provide an in-depth analysis of how the subwavelength geometry synthesizes the metamaterial and give insight into how properties like refractive index or anisotropy can be tailored. The latest applications are then reviewed in detail, with a clear focus on how subwavelength structures improve device performance. Finally, we illustrate the design of two ground-breaking devices in more detail and discuss the prospects of subwavelength gratings as a tool for the advancement of silicon photonics

Integral Optics: Lecture Notes

An introduction is given to the principles of integrated optics and optical guided-wave devices. The characteristics of dielectric waveguides are summarized and methods for their fabrication are described. An illustration is given of recent work on devices including directional couplers, filters, modulators, light deflectors, and lasers. The textbook reflects the latest achievements in the field of integrated optics, which have had a significant impact on the development of communication technology and methods for transmitting and processing information

Metamaterials and optical sensing at visible and near infra-red wavelengths

Developments in the field of optical sensing have seen the creation of a wide variety of new structures and materials. These include metamaterial sensors, which comprise of nanostructures with physical dimensions smaller than the wavelength of light. Two of the most widely researched metamaterial structures are the Split Ring Resonator (SRR) and fishnet. Both of these structures can be physically altered (in terms of geometry, material composition or periodicity) to exhibit plasmonic resonances at frequencies as far as the visible regime. The near-infrared frequency range is of particular interest with regard to optical sensing as many molecular absorption bands can be found here. This thesis studies the effectiveness of different designs of optical sensors and the fabrication techniques used to produce them. By changing the dimensions and constituent metal of SRRs, their resonance response is analysed and parameters such as the Quality factor (Q-factor) obtained. The sensitivity of a single gap SRR to the presence of a thin film and localised block of Polymethyl methacrylate (PMMA) is experimentally measured. By changing the position of the localised PMMA block, it can be used as a material probe for the sensor, enabling the areas of greatest sensitivity to be determined. The sensitivity of the SRR is found to greatly depend on the polarisation of the incident electric field with respect to the structure, varying between 143 nm/RIU and 612 nm/RIU when PMMA is positioned at the gap in the ring. Complementary simulations offer additional insight into the behaviour of the structure at a range of frequencies. In addition to plasmonic structures, the fabrication and characterisation of a polymer photonic biosensor is also studied. This sensor utilises a distributed Bragg reflector (DBR) cavity adjacent to a rib waveguide to create a narrow stop-band that can potentially be used in the sensing of specifically targeted biological analytes. For optical sensors to make a transition from research environment to commercial application, the costly fabrication techniques associated with the research and development of nanostructures need to be avoided. Nanoimprint lithography (NIL) offers multiple benefits in terms of cost, fabrication time and the patterning of large areas and is well suited to the commercial sector. NIL has been extensively used throughout the work detailed in this thesis to pattern SRRs, fishnets and polymer sensors

MEMS Technology for Biomedical Imaging Applications

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community