Low Leakage and PDP Optimized FinFET based 8T SRAM Design

The paper proposes a Fin Field Effect Transistors (FinFETs) based SRAM design comprising of 8 transistors. The circuit utilizes channel length of 22 nanometers. The operation of this circuit is dependent upon the control switch CS that decides the operating mode and minimizes the leakage current flowing in the cell which in turn lowers the leakage power to a minimal value of 0.331pW. The read buffer available in the design provides a different path for read mode and also enhances the Read Static Noise Margin (RSNM), thus enhancing the readability of the circuit.This design is also able to operate at a minimal voltage of 70mV, thus efficiently utilizing the power available. It also optimizes the power delay product (PDP) for both read and write operations

Expanded Noise Margin 10T SRAM Cell using Finfet Device

Static random access memory (SRAM) cells are being improved in order to increase resistance to device level changes and satisfy the requirements of low-power applications. A unique 10-transistor FinFET-based SRAM cell with single-ended read and differential write functionality is presented in this study. This cutting-edge architecture is more power-efficient than ST (Schmitt trigger) 10T or traditional 6T SRAM cells, using only 1.87 and 1.6 units of power respectively during read operations. The efficiency is attributable to a lower read activity factor, which saves electricity. The read static noise margin (RSNM) and write static noise margin (WSNM) of the proposed 10T SRAM cell show notable improvements over the 6T SRAM cell, increasing by 1.67 and 1.86, respectively. Additionally, compared to the 6T SRAM cell, the read access time has been significantly reduced by 1.96 seconds. Utilising the Cadence Virtuoso tool and an 18nm Advanced Node Process Design Kit (PDK) technology file, the design's efficacy has been confirmed. For low-power electronic systems and next-generation memory applications, this exciting 10T SRAM cell has a lot of potential

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design

Static random access memories (SRAM) are useful building blocks in various applications, including cache memories, integrated data storage systems, and microprocessors. The von Neumann bottleneck difficulties are solved by in-memory computing. It eliminates unnecessary frequent data transfer between memory and processing units simultaneously. In this research, the replica-based 10T SRAM design for in-memory computing (IMC) is designed by adapting the word line control scheme in 14nm CMOS technology. In order to achieve high reading and writing capability, the Schmitt trigger inverter was used for energy-saving and stable use. To speed up the writing process of the design, a single transistor is inserted between the cross-coupled inverters. In addition, to increase the node capacity, the voltage boosting circuitry is emphasized. The adaptive word line control scheme was utilized by integrating the replica column based circuit. The Replica approach regulates signal flow through the core by using a dummy column and a dummy row in RAM. To demonstrate the viability of the suggested design, the simulated outcomes are contrasted with those of existing designs. The various performance metrics examined are Read Static Noise Margin (RSNM), Write (WSNM), Hold (HSNM), Read Access Delay (RAD), Write Access Delay (WAD), Read performance and Write performance the varying supply voltage is evaluated

Reconfigurable negative bit line collapsed supply write-assist for 9T-ST static random access memory cell

This paper presents a reconfigurable negative bit line collapsed supply (RNBLCS) write driver circuit for the 9T Schmitt trigger-based static random-access memory (SRAM) cell (9T-ST), significantly improving write performance for real-time memory applications. In deep sub-micron technology, increasing device parameter deviations significantly reduce SRAM cells' write-ability. The proposed RNBLCS write-assist driver for 9T-ST SRAM cell has 0.84×, 0.48×, 0.27× optimized write access delay and 1.05×, 1.08×, 1.19× improvement in write static noise margin (WSNM), 1.05×, 1.13×, and 1.39× improvement in write margin (WM), 0.96×, 0.89× and 0.72× minimum write trip-point (WTP) from transient-negative bit line (Tran-NBL), capacitive charge sharing (CCS), and conventional write circuits respectively. The proposed RNBLCS is functionally verified using a synopsys custom compiler with a 16 nm BSIM4 model card for bulk complementary metal-oxide semiconductor (CMOS)

PAOD: a predictive approach for optimization of design in FinFET/SRAM

The evolutions in the modern memory units are comeup with FinFET/SRAM which can be utilized over high scaled computing units and in other devices. Some of the recent systems were surveyed through which it is known that existing systems lags with improving the performance and optimization of FinFET/SRAM design. Thus, the paper introduces an optimized model based on Search Optimization mechanism that uses Predictive Approach to optimize the design structure of FinFET/SRAM (PAOD). Using this can achieve significant fault tolerance under dynamic cumpting devices and applications. The model uses mathematical methodology which helps to attain less computational time and significant output even at more simulation iteration. This POAD is cost effective as it provides better convergence of FinFET/SRAM design than recursive design

Novel High Performance Ultra Low Power Static Random Access Memories (SRAMs) Based on Next Generation Technologies

Title from PDF of title page viewed January 27, 2021Dissertation advisor: Masud H. ChowdhuryVitaIncludes bibliographical references (page 107-120)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019Next Big Thing Is Surely Small: Nanotechnology Can Bring Revolution. Nanotechnology leads the world towards many new applications in various fields of computing, communication, defense, entertainment, medical, renewable energy and environment. These nanotechnology applications require an energy-efficient memory system to compute and process. Among all the memories, Static Random Access Memories (SRAMs) are high performance memories and occupies more than 50% of any design area. Therefore, it is critical to design high performance and energy-efficient SRAM design. Ultra low power and high speed applications require a new generation memory capable of operating at low power as well as low execution time. In this thesis, a novel 8T SRAM design is proposed that offers significantly faster access time and lowers energy consumption along with better read stability and write ability. The proposed design can be used in the conventional SRAM as well as in computationally intensive applications like neural networks and machine learning classifiers [1]-[4]. Novel 8T SRAM design offers higher energy efficiency, reliability, robustness and performance compared to the standard 6T and other existing 8T and 9T designs. It offers the advantages of a 10T SRAM without the additional area, delay and power overheads of the 10T SRAM. The proposed 8T SRAM would be able to overcome many other limitations of the conventional 6T and other 7T, 8T and 9T designs. The design employs single bitline for the write operation, therefore the number of write drivers are reduced. The defining feature of the proposed 8T SRAM is its hybrid design, which is the combination of two techniques: (i) the utilization of single-ended bitline and (ii) the utilization of virtual ground. The single-ended bitline technique ensures separate read and write operations, which eventually reduces the delay and power consumption during the read and write operations. It's independent read and write paths allow the use of the minimum sized access transistors and aid in a disturb-free read operation. The virtual ground weakens the positive feedback in the SRAM cell and improves its write ability. The virtual ground technique is also used to reduce leakages. The proposed design does not require precharging the bitlines for the read operation, which reduces the area and power overheads of the memory system by eliminating the precharging circuit. The design isolates the storage node from the read path, which improves the read stability. For reliability study, we have investigated the static noise margin (SNM) of the proposed 8T SRAM, for which, we have used two methods – (i) the traditional SNM method with the butterfly curve, (ii) the N-curve method A comparative analysis is performed between the proposed and the existing SRAM designs in terms of area, total power consumption during the read and write operations, and stability and reliability. All these advantages make the proposed 8T SRAM design an ideal candidate for the conventional and computationally intensive applications like machine learning classifier and deep learning neural network. In addition to this, there is need for next generation technologies to design SRAM memory because the conventional CMOS technology is approaching its physical and performance boundaries and as a consequence, becoming incompatible with ultra-low-power applications. Emerging devices such as Tunnel Field Effect Transistor (TFET)) and Graphene Nanoribbon Field Effect Transistor (GNRFET) devices are highly potential candidates to overcome the limitations of MOSFET because of their ability to achieve subthreshold slopes below 60 mV/decade and very low leakage currents [6]-[9]. This research also explores novel TFET and GNRFET based 6T SRAM. The thesis evaluates the standby leakage power in the Tunnel FET (TFET) based 6T SRAM cell for different pull-up, pull-down, and pass-gate transistors ratios (PU: PD: PG) and compared to 10nm FinFET based 6T SRAM designs. It is observed that the 10nm TFET based SRAMs have 107.57%, 163.64%, and 140.44% less standby leakage power compared to the 10nm FinFET based SRAMs when the PU: PD: PG ratios are 1:1:1, 1:5:2 and 2:5:2, respectively. The thesis also presents an analysis of the stability and reliability of sub-10nm TFET based 6T SRAM circuit with a reduced supply voltage of 500mV. The static noise margin (SNM), which is a critical measure of SRAM stability and reliability, is determined for hold, read and write operations of the 6T TFET SRAM cell. The robustness of the optimized TFET based 6T SRAM circuit is also evaluated at different supply voltages. Simulations were done in HSPICE and Cadence tools. From the analysis, it is clear that the main advantage of the TFET based SRAM would be the significant improvement in terms of leakage or standby power consumption. Compared to the FinFET based SRAM the standby leakage power of the T-SRAMs are 107.57%, 163.64%, and 140.44% less for 1:1:1, 1:5:2 and 2:5:2 configurations, respectively. Since leakage/standby power is the primary source of power consumption in the SRAM, and the overall system energy efficiency depends on SRAM power consumption, TFET based SRAM would lead to massive improvement of the energy efficiency of the system. Therefore, T-SRAMs are more suitable for ultra-low power applications. In addition to this, the thesis evaluates the standby leakage power of types of Graphene Nanoribbon FETs based 6T SRAM bitcell and compared to 10nm FinFET based 6T SRAM bitcell. It is observed that the 10nm MOS type GNRFET based SRAMs have 16.43 times less standby leakage power compared to the 10nm FinFET based SRAMs. The double gate SB-GNRFET based SRAM consumes 1.35E+03 times less energy compared to the 10nm FinFET based SRAM during write. However, during read double gate SB-GNRFET based SRAM consume 15 times more energy than FinFET based SRAM. It is also observed that GNRFET based SRAMs are more stable and reliable than FinFET based SRAM.Introduction -- Background -- Novel High Performance Ultra Low Power SRAM Design -- Tunnel FET Based SRAM Design -- Graphene Nanoribbon FET Based SRAM Design -- Double-gate FDSOI Based SRAM Designs -- Novel CNTFET and MEMRISTOR Based Digital Designs -- Conclusio

Energy optimization of 6T SRAM cell using low-voltage and high-performance inverter structures

The performance of the cell deteriorates, when static random access memory (SRAM) cell is operated below 1V supply voltage with continuous scale down of the complementary metal oxide semiconductor (CMOS) technology. The conventional 6T, 8T-SRAM cells suffer writeability and read static noise margins (SNM) at low-voltages leads to degradation of cell stability. To improve the cell stability and reduce the dynamic power dissipation at low- voltages of the SRAM cell, we proposed four SRAM cells based on inverter structures with less energy consumption using voltage divider bias current sink/source inverter and NOR/NAND gate using a pseudo-nMOS inverter. The design and implementation of SRAM cell using proposed inverter structures are compared with standard 6T, 8T and ST-11T SRAM cells for different supply voltages at 22-nm CMOS technology exhibit better performance of the cell. The read/write static noise margin of the cell significantly increases due to voltage divider bias network built with larger cell-ratio during read path. The load capacitance of the cell is reduced with minimized switching transitions of the devices during high-to-low and low- to-high of the pull-up and pull-down networks from VDD to ground leads to on an average 54% of dynamic power consumption. When compared with the existing ones, the read/write power of the proposed cells is reduced to 30%. The static power gets reduced by 24% due to stacking of transistors takes place in the proposed SRAM cells as compare to existing ones. The layout of the proposed cells is drawn at a 45-nm technology, and occupies an area of 1.5 times greater and 1.8 times greater as compared with 6T-SRAM cell

Subthreshold SRAM Design for Energy Efficient Applications in Nanometric CMOS Technologies

Embedded SRAM circuits are vital components in a modern system on chip (SOC) that can occupy up to 90% of the total area. Therefore, SRAM circuits heavily affect SOC performance, reliability, and yield. In addition, most of the SRAM bitcells are in standby mode and significantly contribute to the total leakage current and leakage power consumption. The aggressive demand in portable devices and billions of connected sensor networks requires long battery life. Therefore, careful design of SRAM circuits with minimal power consumption is in high demand. Reducing the power consumption is mainly achieved by reducing the power supply voltage in the idle mode. However, simply reducing the supply voltage imposes practical limitations on SRAM circuits such as reduced static noise margin, poor write margin, reduced number of cells per bitline, and reduced bitline sensing margin that might cause read/write failures. In addition, the SRAM bitcell has contradictory requirements for read stability and writability. Improving the read stability can cause difficulties in a write operation or vice versa. In this thesis, various techniques for designing subthreshold energy-efficient SRAM circuits are proposed. The proposed techniques include improvement in read margin and write margin, speed improvement, energy consumption reduction, new bitcell architecture and utilizing programmable wordline boosting. A programmable wordline boosting technique is exploited on a conventional 6T SRAM bitcell to improve the operational speed. In addition, wordline boosting can reduce the supply voltage while maintaining the operational frequency. The reduction of the supply voltage allows the memory macro to operate with reduced power consumption. To verify the design, a 16-kb SRAM was fabricated using the TSMC 65 nm CMOS technology. Measurement results show that the maximum operational frequency increases up to 33.3% when wordline boosting is applied. Besides, the supply voltage can be reduced while maintaining the same frequency. This allows reducing the energy consumption to be reduced by 22.2%. The minimum energy consumption achieved is 0.536 fJ/b at 400 mV. Moreover, to improve the read margin, a 6T bitcell SRAM with a PMOS access transistor is proposed. Utilizing a PMOS access transistor results in lower zero level degradation, and hence higher read stability. In addition, the access transistor connected to the internal node holding V DD acts as a stabilizer and counterbalances the effect of zero level degradation. In order to improve the writability, wordline boosting is exploited. Wordline boosting also helps to compensate for the lower speed of the PMOS access transistor compared to a NMOS transistor. To verify our design, a 2kb SRAM is fabricated in the TSMC 65 nm CMOS technology. Measurement results show that the maximum operating frequency of the test chip is at 3.34 MHz at 290 mV. The minimum energy consumption is measured as 1.1 fJ/b at 400 mV

Statistical analysis and design of subthreshold operation memories

This thesis presents novel methods based on a combination of well-known statistical techniques for faster estimation of memory yield and their application in the design of energy-efficient subthreshold memories. The emergence of size-constrained Internet-of-Things (IoT) devices and proliferation of the wearable market has brought forward the challenge of achieving the maximum energy efficiency per operation in these battery operated devices. Achieving this sought-after minimum energy operation is possible under sub-threshold operation of the circuit. However, reliable memory operation is currently unattainable at these ultra-low operating voltages because of the memory circuit's vanishing noise margins which shrink further in the presence of random process variations. The statistical methods, presented in this thesis, make the yield optimization of the sub-threshold memories computationally feasible by reducing the SPICE simulation overhead. We present novel modifications to statistical sampling techniques that reduce the SPICE simulation overhead in estimating memory failure probability. These sampling scheme provides 40x reduction in finding most probable failure point and 10x reduction in estimating failure probability using the SPICE simulations compared to the existing proposals. We then provide a novel method to create surrogate models of the memory margins with better extrapolation capability than the traditional regression methods. These models, based on Gaussian process regression, encode the sensitivity of the memory margins with respect to each individual threshold variation source in a one-dimensional kernel. We find that our proposed additive kernel based models have 32% smaller out-of-sample error (that is, better extrapolation capability outside training set) than using the six-dimensional universal kernel like Radial Basis Function (RBF). The thesis also explores the topological modifications to the SRAM bitcell to achieve faster read operation at the sub-threshold operating voltages. We present a ten-transistor SRAM bitcell that achieves 2x faster read operation than the existing ten-transistor sub-threshold SRAM bitcells, while ensuring similar noise margins. The SRAM bitcell provides 70% reduction in dynamic energy at the cost of 42% increase in the leakage energy per read operation. Finally, we investigate the energy efficiency of the eDRAM gain-cells as an alternative to the SRAM bitcells in the size-constrained IoT devices. We find that reducing their write path leakage current is the only way to reduce the read energy at Minimum Energy operation Point (MEP). Further, we study the effect of transistor up-sizing under the presence of threshold voltage variations on the mean MEP read energy by performing statistical analysis based on the ANOVA test of the full-factorial experimental design.Esta tesis presenta nuevos métodos basados en una combinación de técnicas estadísticas conocidas para la estimación rápida del rendimiento de la memoria y su aplicación en el diseño de memorias de energia eficiente de sub-umbral. La aparición de los dispositivos para el Internet de las cosas (IOT) y la proliferación del mercado portátil ha presentado el reto de lograr la máxima eficiencia energética por operación de estos dispositivos operados con baterias. La eficiencia de energía es posible si se considera la operacion por debajo del umbral de los circuitos. Sin embargo, la operación confiable de memoria es actualmente inalcanzable en estos bajos niveles de voltaje debido a márgenes de ruido de fuga del circuito de memoria, los cuales se pueden reducir aún más en presencia de variaciones randomicas de procesos. Los métodos estadísticos, que se presentan en esta tesis, hacen que la optimización del rendimiento de las memorias por debajo del umbral computacionalmente factible mediante la simulación SPICE. Presentamos nuevas modificaciones a las técnicas de muestreo estadístico que reducen la sobrecarga de simulación SPICE en la estimación de la probabilidad de fallo de memoria. Estos esquemas de muestreo proporciona una reducción de 40 veces en la búsqueda de puntos de fallo más probable, y 10 veces la reducción en la estimación de la probabilidad de fallo mediante las simulaciones SPICE en comparación con otras propuestas existentes. A continuación, se proporciona un método novedoso para crear modelos sustitutos de los márgenes de memoria con una mejor capacidad de extrapolación que los métodos tradicionales de regresión. Estos modelos, basados en el proceso de regresión Gaussiano, codifican la sensibilidad de los márgenes de memoria con respecto a cada fuente de variación de umbral individual en un núcleo de una sola dimensión. Los modelos propuestos, basados en kernel aditivos, tienen un error 32% menor que el error out-of-sample (es decir, mejor capacidad de extrapolación fuera del conjunto de entrenamiento) en comparacion con el núcleo universal de seis dimensiones como la función de base radial (RBF). La tesis también explora las modificaciones topológicas a la celda binaria SRAM para alcanzar velocidades de lectura mas rapidas dentro en el contexto de operaciones en el umbral de tensiones de funcionamiento. Presentamos una celda binaria SRAM de diez transistores que consigue aumentar en 2 veces la operación de lectura en comparacion con las celdas sub-umbral de SRAM de diez transistores existentes, garantizando al mismo tiempo los márgenes de ruido similares. La celda binaria SRAM proporciona una reducción del 70% en energía dinámica a costa del aumento del 42% en la energía de fuga por las operaciones de lectura. Por último, se investiga la eficiencia energética de las células de ganancia eDRAM como una alternativa a los bitcells SRAM en los dispositivos de tamaño limitado IOT. Encontramos que la reducción de la corriente de fuga en el path de escritura es la única manera de reducir la energía de lectura en el Punto Mínimo de Energía (MEP). Además, se estudia el efecto del transistor de dimensionamiento en virtud de la presencia de variaciones de voltaje de umbral en la media de energia de lecture MEP mediante el análisis estadístico basado en la prueba de ANOVA del diseño experimental factorial completo.Postprint (published version

Doctor of Philosophy

dissertationAdvancements in process technology and circuit techniques have enabled the creation of small chemical microsystems for use in a wide variety of biomedical and sensing applications. For applications requiring a small microsystem, many components can be integrated onto a single chip. This dissertation presents many low-power circuits, digital and analog, integrated onto a single chip called the Utah Microcontroller. To guide the design decisions for each of these components, two specific microsystems have been selected as target applications: a Smart Intravaginal Ring (S-IVR) and an NO releasing catheter. Both of these applications share the challenging requirements of integrating a large variety of low-power mixed-signal circuitry onto a single chip. These applications represent the requirements of a broad variety of small low-power sensing systems. In the course of the development of the Utah Microcontroller, several unique and significant contributions were made. A central component of the Utah Microcontroller is the WIMS Microprocessor, which incorporates a low-power feature called a scratchpad memory. For the first time, an analysis of scaling trends projected that scratchpad memories will continue to save power for the foreseeable future. This conclusion was bolstered by measured data from a fabricated microcontroller. In a 32 nm version of the WIMS Microprocessor, the scratchpad memory is projected to save ~10-30% of memory access energy depending upon the characteristics of the embedded program. Close examination of application requirements informed the design of an analog-to-digital converter, and a unique single-opamp buffered charge scaling DAC was developed to minimize power consumption. The opamp was designed to simultaneously meet the varied demands of many chip components to maximize circuit reuse. Each of these components are functional, have been integrated, fabricated, and tested. This dissertation successfully demonstrates that the needs of emerging small low-power microsystems can be met in advanced process nodes with the incorporation of low-power circuit techniques and design choices driven by application requirements