Single-Frequency Network Terrestrial Broadcasting with 5GNR Numerology

L'abstract è presente nell'allegato / the abstract is in the attachmen

Frequency-aware rate adaptation and MAC protocol

There has been burgeoning interest in wireless technologies that can use wider frequency spectrum. Technology advances, such as 802.11n and ultra-wideband (UWB), are pushing toward wider frequency bands. The analog-to-digital TV transition has made 100-250 MHz of digital whitespace bandwidth available for unlicensed access. Also, recent work on WiFi networks has advocated discarding the notion of channelization and allowing all nodes to access the wide 802.11 spectrum in order to improve load balancing. This shift towards wider bands presents an opportunity to exploit frequency diversity. Specifically, frequencies that are far from each other in the spectrum have significantly different SNRs, and good frequencies differ across sender-receiver pairs. This paper presents FARA, a combined frequency-aware rate adaptation and MAC protocol. FARA makes three departures from conventional wireless network design: First, it presents a scheme to robustly compute per-frequency SNRs using normal data transmissions. Second, instead of using one bit rate per link, it enables a sender to adapt the bitrate independently across frequencies based on these per-frequency SNRs. Third, in contrast to traditional frequency-oblivious MAC protocols, it introduces a MAC protocol that allocates to a sender-receiver pair the frequencies that work best for that pair. We have implemented FARA in FPGA on a wideband 802.11-compatible radio platform. Our experiments reveal that FARA provides a 3.1x throughput improvement in comparison to frequency-oblivious systems that occupy the same spectrum.Industrial Technology Research InstituteNational Science Foundation (U.S.)

GOODPUT BASED ADAPTIVE MODULATION AND CODING ALGORITHM FOR BIC-OFDM SYSTEMS

WiMAX IEEE 802.16m standard description and implementation of simulation software. SISO and MIMO techniques(open loop and closed loop) implementation and resultis validation. A novel physical abstraction and Link layer prediction for 802.16m MIMO BIC-OFDM system based on goodput maximization: Effective SNR mapping, with low complexity but same performance or even better compared with MIESM, called novel kESM. Theoretical derivation of novel kESM physical abstraction technique, comparison between kESM and MI-ESM / EESM. Goodput oriented adaptive modulation and coding algorithm for BIC-OFDM wireless system based on above-mentioned abstraction. Theoretical derivation and dissertation. Simulations of 802.16m WiMAX system using C++ and C++ with IT++ libraries(used in NEWCOMM++ project). Various graphic rapresentation for different modulation and coding schemas, dissertation abuot visual and practical results

LDPC code-based bandwidth efficient coding schemes for wireless communications

This dissertation deals with the design of bandwidth-efficient coding schemes with Low-Density Parity-Check (LDPC) for reliable wireless communications. Code design for wireless channels roughly falls into three categories: (1) when channel state information (CSI) is known only to the receiver (2) more practical case of partial CSI at the receiver when the channel has to be estimated (3) when CSI is known to the receiver as well as the transmitter. We consider coding schemes for all the above categories. For the first scenario, we describe a bandwidth efficient scheme which uses highorder constellations such as QAM over both AWGN as well as fading channels. We propose a simple design with LDPC codes which combines the good properties of Multi-level Coding (MLC) and bit-interleaved coded-modulation (BICM) schemes. Through simulations, we show that the proposed scheme performs better than MLC for short-medium lengths on AWGN and block-fading channels. For the first case, we also characterize the rate-diversity tradeoff of MIMO-OFDM and SISO-OFDM systems. We design optimal coding schemes which achieve this tradeoff when transmission is from a constrained constellation. Through simulations, we show that with a sub-optimal iterative decoder, the performance of this coding scheme is very close to the optimal limit for MIMO (flat quasi-static fading), MIMO-OFDM and SISO OFDM systems. For the second case, we design non-systematic Irregular Repeat Accumulate (IRA) codes, which are a special class of LDPC codes, for Inter-Symbol Interference (ISI) fading channels when CSI is estimated at the receiver. We use Orthogonal Frequency Division Multiplexing (OFDM) to convert the ISI fading channel into parallel flat fading subchannels. We use a simple receiver structure that performs iterative channel estimation and decoding and use non-systematic IRA codes that are optimized for this receiver. This combination is shown to perform very close to a receiver with perfect CSI and is also shown to be robust to change in the number of channel taps and Doppler. For the third case, we look at bandwidth efficient schemes for fading channels that perform close to capacity when the channel state information is known at the transmitter as well as the receiver. Schemes that achieve capacity with a Gaussian codebook for the above system are already known but not for constrained constellations. We derive the near-optimum scheme to achieve capacity with constrained constellations and then propose coding schemes which perform close to capacity. Through linear transformations, a MIMO system can be converted into non-interfering parallel subchannels and we further extend the proposed coding schemes to the MIMO case too

Optimized Scalable Image and Video Transmission for MIMO Wireless Channels

In this chapter, we focus on proposing new strategies to efficiently transfer a compressed image/video content through wireless links using a multiple antenna technology. The proposed solutions can be considered as application layer physical layer (APP-PHY) cross layer design methods as they involve optimizing both application and physical layers. After a wide state-of-the-art study, we present two main solutions. The first focuses on using a new precoding algorithm that takes into account the image/video content structure when assigning transmission powers. We showed that its results are better than the existing conventional precoders. Second, a link adaptation process is integrated to efficiently assign coding parameters as a function of the channel state. Simulations over a realistic channel environment show that the link adaptation activates a dynamic process that results in a good image/video reconstruction quality even if the channel is varying. Finally, we incorporated soft decoding algorithms at the receiver side, and we showed that they could induce further improvements. In fact, almost 5 dB peak signal-to-noise ratio (PSNR) improvements are demonstrated in the case of transmission over a Rayleigh channel

Joint Detection and Decoding of High-Order Modulation Schemes for CDMA and OFDM Wireless Communications

Wireless communications call for high data rate, power and bandwidth efficient transmissions. High-order modulation schemes are suitable candidates for this purpose as the potential to reduce the symbol period is often limited by the multipath-induced intersymbol interference. In order to reduce the power consumption, and at the same time, to estimate time-variant wireless channels, we propose low-complexity, joint detection and decoding schemes for high-order modulation signals in this dissertation. We start with the iterative demodulation and decoding of high-order CPM signals for mobile communications. A low complexity, pilot symbol-assisted coherent modulation scheme is proposed that can significantly improve the bit error rate performance by efficiently exploiting the inherent memory structure of the CPM modulation. A noncoherent scheme based on multiple symbol differential detection is also proposed and the performances of the two schemes are simulated and compared. Second, two iterative demodulation and decoding schemes are proposed for quadrature amplitude modulated signals in flat fading channels. Both of them make use of the iterative channel estimation based on the data signal reconstructed from decoder output. The difference is that one of them has a threshold controller that only allows the data reconstructed with high reliability values to be used for iterative channel estimation, while the other one directly uses all reconstructed data. As the second scheme has much lower complexity with a performance similar to the best of the first one, we further apply it to the space-time coded CDMA Rake receiver in frequency-selective multipath channels. We will compare it to the pilot-aided demodulation scheme that uses a dedicated pilot signal for channel estimation. In the third part of the dissertation, we design anti-jamming multicarrier communication systems. Two types of jamming signals are considered - the partial-band tone jamming and the partial-time pulse jamming. We propose various iterative schemes to detect, estimate, and cancel the jamming signal in both AWGN and fading channels. Simulation results demonstrate that the proposed systems can provide reliable communications over a wide range of jamming-to-signal power ratios. Last, we study the problem of maximizing the throughput of a cellular multicarrier communication network with transmit or receive diversity. The total throughput of the network is maximized subject to power constraints on each mobile. We first extend the distributed water-pouring power control algorithm from single transmit and receive antenna to multiple transmit and receive antennas. Both equal power diversity and selective diversity are considered. We also propose a centralized power control algorithm based on the active set strategy and the gradient projection method. The performances of the two algorithms are assessed with simulation and compared with the equal power allocation algorithm

Constellation design for future communication systems: a comprehensive survey

[EN] The choice of modulation schemes is a fundamental building block of wireless communication systems. As a key component of physical layer design, they critically impact the expected communication capacity and wireless signal robustness. Their design is also critical for the successful roll-out of wireless standards that require a compromise between performance, efficiency, latency, and hardware requirements. This paper presents a survey of constellation design strategies and associated outcomes for wireless communication systems. The survey discusses their performance and complexity to address the need for some desirable properties, including consistency, channel capacity, system performance, required demapping architecture, flexibility, and independence. Existing approaches for constellation designs are investigated using appropriate metrics and categorized based on their theoretical algorithm design. Next, their application to different communication standards is analyzed in context, aiming at distilling general guidelines applicable to the wireless building block design. Finally, the survey provides a discussion on design directions for future communication system standardization processes.This work was supported in part by the Basque Government under Grant IT1234-19, in part by the PREDOC under Program PRE_2020_2_0105, and in part by the Spanish Government through the Project PHANTOM (MCIU/AEI/FEDER, UE) under Gran