Doctor of Philosophy

dissertationThe use of multicarrier techniques has allowed the rapid expansion of broadband wireless communications. Orthogonal frequency division multiplexing (OFDM) has been the most dominant technology in the past decade. It has been deployed in both indoor Wi-Fi and cellular environments, and has been researched for use in underwater acoustic channels. Recent works in wireless communications include the extension of OFDM to multiple access applications. Multiple access OFDM, or orthogonal frequency division multiple access (OFDMA), has been implemented in the third generation partnership project (3GPP) long- term evolution (LTE) downlink. In order to reduce the intercarrier interference (ICI) when user's synchronization is relaxed, filterbank multicarrier communication (FBMC) systems have been proposed. The first contribution made in this dissertation is a novel study of the classical FBMC systems that were presented in 1960s. We note that two distinct methods were presented then. We show that these methods are closely related through a modulation and a time/frequency scaling step. For cellular channels, OFDM also has the weakness of relatively large peak-to-average power ratios (PAPR). A special form of OFDM for the uplink of multiple access networks, called single carrier frequency division multiple access (SC-FDMA), has been developed to mitigate this issue. In this regard, this dissertation makes two contributions. First, we develop an optimization method for designing an effective precoding method for SC-FDMA systems. Second, we show how an equivalent to SC-FDMA can be developed for systems that are based on FBMC. In underwater acoustic communications applications, researchers are investigating the use of multicarrier communication systems like OFDM in underwater channels. The movement of the communicating vehicles scales the received signal along the time axis, which is often referred to as Doppler scaling. To undo the signal degradation, researchers have investigated methods to estimate the Doppler scaling factor and restore the original signal using resampling. We investigate a method called nonuniform fast Fourier transform (NUFFT) and apply that to increase the precision in the detection and correction of the Doppler scaling factor. NUFFT is applied to both OFDM and FBMC and its performance over the experimental data obtained from at sea experiments is investigated

Performance Optimization of Peak to Average Power Ratio in FBMC Waveforms

High spectral efficiency and low computational complexity are the requirements of 5G wireless communication systems. They must also offer low PAPR (peak to average power ratio), low latency, and high throughput. In 5G it is not possible to realise all of these requirements through a single technique. One of the efforts is to look for a suitable technique for 5G. So, a suitable technique emerges whose name is Filter Bank Multicarrier (FBMC). But it has a high complexity, high Peak to Average Power (PAPR) and high out of band (OOB) leakage which results in inter-carrier interference and inter-channel interference. Also, due to high PAPR, mobile batteries are depleted more rapidly. So, a PAPR reduced method is needed. In this paper, a method of Pruned DFT Precoded FBMC to optimize the PAPR for different number of subcarriers. The performance evaluation in terms of bit error rate (BER) and spectral efficiency of OFDM, FBMC and Pruned DFT Precoded FBMC has been done in this paper.  In DFT Precoded FBMC, a DFT spreading matrix is multiplied with FBMC waveform and transmit only some part especially half of the DFT precoded matrix and rest remain zero by us. Monte Carlo simulation with one tap equalizer is used to validate our results

Waveform Design for 5G and beyond Systems

5G traffic has very diverse requirements with respect to data rate, delay, and reliability. The concept of using multiple OFDM numerologies adopted in the 5G NR standard will likely meet these multiple requirements to some extent. However, the traffic is radically accruing different characteristics and requirements when compared with the initial stage of 5G, which focused mainly on high-speed multimedia data applications. For instance, applications such as vehicular communications and robotics control require a highly reliable and ultra-low delay. In addition, various emerging M2M applications have sparse traffic with a small amount of data to be delivered. The state-of-the-art OFDM technique has some limitations when addressing the aforementioned requirements at the same time. Meanwhile, numerous waveform alternatives, such as FBMC, GFDM, and UFMC, have been explored. They also have their own pros and cons due to their intrinsic waveform properties. Hence, it is the opportune moment to come up with modification/variations/combinations to the aforementioned techniques or a new waveform design for 5G systems and beyond. The aim of this Special Issue is to provide the latest research and advances in the field of waveform design for 5G systems and beyond

Theoretical Analysis and Performance Comparison of multi-carrier Waveforms for 5G Wireless Applications

5G wireless technology is a new wireless communication system that must meet different complementary needs: high data rate for mobile services, low energy consumption and long-range for connected objects, low latency to ensure real-time communication for critical applications and high spectral efficiency to improve the overall system capacity. The waveforms and associated signals processing, present a real challenge in the implementation for each generation of wireless communication networks. This paper presents the diverse waveforms candidate for 5G systems, including: CE-OFDM (Constant Envelope OFDM), Filter-Bank Multi Carrier (FBMC), Universal Filtered Multi-Carrier (UFMC) and Filtered OFDM (F-OFDM). In this work, simulations are carried out in order to compare the performance of the OFDM, CE-OFDM, F-OFDM, UFMC and FBMC in terms of Power spectral density (PSD) and of Bit Error Rate (BER). It has been demonstrated that (CE-OFDM), constitutes a more efficient solution in terms of energy consumption than OFDM signal. Moreover, the (F-OFDM), (UFMC) and (FBMC) could constitute a more efficient solution in terms of power spectral density, spectral efficiency and bit error rates. In fact, CE-OFDM reduces the Peak to Average Power Ratio (PAPR) associated with OFDM system, FBMC is a method of improving out-of-band (OOB) characteristic by filtering each subcarrier and resisting the inter-carrier interference (ICI). While, UFMC offers a high spectral efficiency compared to OFDM

Unified Framework for Multicarrier and Multiple Access based on Generalized Frequency Division Multiplexing

The advancements in wireless communications are the key-enablers of new applications with stringent requirements in low-latency, ultra-reliability, high data rate, high mobility, and massive connectivity. Diverse types of devices, ranging from tiny sensors to vehicles, with different capabilities need to be connected under various channel conditions. Thus, modern connectivity and network techniques at all layers are essential to overcome these challenges. In particular, the physical layer (PHY) transmission is required to achieve certain link reliability, data rate, and latency. In modern digital communications systems, the transmission is performed by means of a digital signal processing module that derives analog hardware. The performance of the analog part is influenced by the quality of the hardware and the baseband signal denoted as waveform. In most of the modern systems such as fifth generation (5G) and WiFi, orthogonal frequency division multiplexing (OFDM) is adopted as a favorite waveform due to its low-complexity advantages in terms of signal processing. However, OFDM requires strict requirements on hardware quality. Many devices are equipped with simplified analog hardware to reduce the cost. In this case, OFDM does not work properly as a result of its high peak-to-average power ratio (PAPR) and sensitivity to synchronization errors. To tackle these problems, many waveforms design have been recently proposed in the literature. Some of these designs are modified versions of OFDM or based on conventional single subcarrier. Moreover, multicarrier frameworks, such as generalized frequency division multiplexing (GFDM), have been proposed to realize varieties of conventional waveforms. Furthermore, recent studies show the potential of using non-conventional waveforms for increasing the link reliability with affordable complexity. Based on that, flexible waveforms and transmission techniques are necessary to adapt the system for different hardware and channel constraints in order to fulfill the applications requirements while optimizing the resources. The objective of this thesis is to provide a holistic view of waveforms and the related multiple access (MA) techniques to enable efficient study and evaluation of different approaches. First, the wireless communications system is reviewed with specific focus on the impact of hardware impairments and the wireless channel on the waveform design. Then, generalized model of waveforms and MA are presented highlighting various special cases. Finally, this work introduces low-complexity architectures for hardware implementation of flexible waveforms. Integrating such designs with software-defined radio (SDR) contributes to the development of practical real-time flexible PHY.:1 Introduction 1.1 Baseband transmission model 1.2 History of multicarrier systems 1.3 The state-of-the-art waveforms 1.4 Prior works related to GFDM 1.5 Objective and contributions 2 Fundamentals of Wireless Communications 2.1 Wireless communications system 2.2 RF transceiver 2.2.1 Digital-analogue conversion 2.2.2 QAM modulation 2.2.3 Effective channel 2.2.4 Hardware impairments 2.3 Waveform aspects 2.3.1 Single-carrier waveform 2.3.2 Multicarrier waveform 2.3.3 MIMO-Waveforms 2.3.4 Waveform performance metrics 2.4 Wireless Channel 2.4.1 Line-of-sight propagation 2.4.2 Multi path and fading process 2.4.3 General baseband statistical channel model 2.4.4 MIMO channel 2.5 Summary 3 Generic Block-based Waveforms 3.1 Block-based waveform formulation 3.1.1 Variable-rate multicarrier 3.1.2 General block-based multicarrier model 3.2 Waveform processing techniques 3.2.1 Linear and circular filtering 3.2.2 Windowing 3.3 Structured representation 3.3.1 Modulator 3.3.2 Demodulator 3.3.3 MIMO Waveform processing 3.4 Detection 3.4.1 Maximum-likelihood detection 3.4.2 Linear detection 3.4.3 Iterative Detection 3.4.4 Numerical example and insights 3.5 Summary 4 Generic Multiple Access Schemes 57 4.1 Basic multiple access and multiplexing schemes 4.1.1 Infrastructure network system model 4.1.2 Duplex schemes 4.1.3 Common multiplexing and multiple access schemes 4.2 General multicarrier-based multiple access 4.2.1 Design with fixed set of pulses 4.2.2 Computational model 4.2.3 Asynchronous multiple access 4.3 Summary 5 Time-Frequency Analyses of Multicarrier 5.1 General time-frequency representation 5.1.1 Block representation 5.1.2 Relation to Zak transform 5.2 Time-frequency spreading 5.3 Time-frequency block in LTV channel 5.3.1 Subcarrier and subsymbol numerology 5.3.2 Processing based on the time-domain signal 5.3.3 Processing based on the frequency-domain signal 5.3.4 Unified signal model 5.4 summary 6 Generalized waveforms based on time-frequency shifts 6.1 General time-frequency shift 6.1.1 Time-frequency shift design 6.1.2 Relation between the shifted pulses 6.2 Time-frequency shift in Gabor frame 6.2.1 Conventional GFDM 6.3 GFDM modulation 6.3.1 Filter bank representation 6.3.2 Block representation 6.3.3 GFDM matrix structure 6.3.4 GFDM demodulator 6.3.5 Alternative interpretation of GFDM 6.3.6 Orthogonal modulation and GFDM spreading 6.4 Summary 7 Modulation Framework: Architectures and Applications 7.1 Modem architectures 7.1.1 General modulation matrix structure 7.1.2 Run-time flexibility 7.1.3 Generic GFDM-based architecture 7.1.4 Flexible parallel multiplications architecture 7.1.5 MIMO waveform architecture 7.2 Extended GFDM framework 7.2.1 Architectures complexity and flexibility analysis 7.2.2 Number of multiplications 7.2.3 Hardware analysis 7.3 Applications of the extended GFDM framework 7.3.1 Generalized FDMA 7.3.2 Enchantment of OFDM system 7.4 Summary 7 Conclusions and Future work