4,631 research outputs found
Spatial Multiplexing of QPSK Signals with a Single Radio: Antenna Design and Over-the-Air Experiments
The paper describes the implementation and performance analysis of the first
fully-operational beam-space MIMO antenna for the spatial multiplexing of two
QPSK streams. The antenna is composed of a planar three-port radiator with two
varactor diodes terminating the passive ports. Pattern reconfiguration is used
to encode the MIMO information onto orthogonal virtual basis patterns in the
far-field. A measurement campaign was conducted to compare the performance of
the beam-space MIMO system with a conventional 2-by-?2 MIMO system under
realistic propagation conditions. Propagation measurements were conducted for
both systems and the mutual information and symbol error rates were estimated
from Monte-Carlo simulations over the measured channel matrices. The results
show the beam-space MIMO system and the conventional MIMO system exhibit
similar finite-constellation capacity and error performance in NLOS scenarios
when there is sufficient scattering in the channel. In comparison, in LOS
channels, the capacity performance is observed to depend on the relative
polarization of the receiving antennas.Comment: 31 pages, 23 figure
Multidimensional Index Modulation in Wireless Communications
In index modulation schemes, information bits are conveyed through indexing
of transmission entities such as antennas, subcarriers, times slots, precoders,
subarrays, and radio frequency (RF) mirrors. Index modulation schemes are
attractive for their advantages such as good performance, high rates, and
hardware simplicity. This paper focuses on index modulation schemes in which
multiple transmission entities, namely, {\em antennas}, {\em time slots}, and
{\em RF mirrors}, are indexed {\em simultaneously}. Recognizing that such
multidimensional index modulation schemes encourage sparsity in their transmit
signal vectors, we propose efficient signal detection schemes that use
compressive sensing based reconstruction algorithms. Results show that, for a
given rate, improved performance is achieved when the number of indexed
transmission entities is increased. We also explore indexing opportunities in
{\em load modulation}, which is a modulation scheme that offers power
efficiency and reduced RF hardware complexity advantages in multiantenna
systems. Results show that indexing space and time in load modulated
multiantenna systems can achieve improved performance
Flexible Power Modeling of LTE Base Stations
With the explosion of wireless communications in number of users and data rates, the reduction of network power consumption becomes more and more critical. This is especially true for base stations which represent a dominant share of the total power in cellular networks. In order to study power reduction techniques, a convenient power model is required, providing estimates of the power consumption in different scenarios. This paper proposes such a model, accurate but simple to use. It evaluates the base station power consumption for different types of cells supporting the 3GPP LTE standard. It is flexible enough to enable comparisons between state-of-the-art and advanced configurations, and an easy adaptation to various scenarios. The model is based on a combination of base station components and sub-components as well as power scaling rules as functions of the main system parameters
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
- …