Deployment Strategies of Multiple Aerial BSs for User Coverage and Power Efficiency Maximization

Unmanned aerial vehicle (UAV) based aerial base stations (BSs) can provide rapid communication services to ground users and are thus promising for future communication systems. In this paper, we consider a scenario where no functional terrestrial BSs are available and the aim is deploying multiple aerial BSs to cover a maximum number of users within a certain target area. To this end, we first propose a naive successive deployment method, which converts the non-convex constraints in the involved optimization into a combination of linear constraints through geometrical relaxation. Then we investigate a deployment method based on K-means clustering. The method divides the target area into K convex subareas, where within each subarea, a mixed integer non-linear problem (MINLP) is solved. An iterative power efficient technique is further proposed to improve coverage probability with reduced power. Finally, we propose a robust technique for compensating the loss of coverage probability in the existence of inaccurate user location information (ULI). Our simulation results show that, the proposed techniques achieve an up to 30% higher coverage probability when users are not distributed uniformly. In addition, the proposed simultaneous deployment techniques, especially the one using iterative algorithm improve power-efficiency by up to 15% compared to the benchmark circle packing theory

Dynamic Aerial Base Station Placement for Minimum-Delay Communications

Queuing delay is of essential importance in the Internet-of-Things scenarios where the buffer sizes of devices are limited. The existing cross-layer research contributions aiming at minimizing the queuing delay usually rely on either transmit power control or dynamic spectrum allocation. Bearing in mind that the transmission throughput is dependent on the distance between the transmitter and the receiver, in this context we exploit the agility of the unmanned-aerial-vehicle (UAV)-mounted base stations (BSs) for proactively adjusting the aerial BS (ABS)'s placement in accordance with wireless teletraffic dynamics. Specifically, we formulate a minimum-delay ABS placement problem for UAV-enabled networks, subject to realistic constraints on the ABS's battery life and velocity. Its solutions are technically realized under three different assumptions in regard to the wireless teletraffic dynamics. The backward induction technique is invoked for both the scenario where the full knowledge of the wireless teletraffic dynamics is available, and for the case where only their statistical knowledge is available. In contrast, a reinforcement learning aided approach is invoked for the case when neither the exact number of arriving packets nor that of their statistical knowledge is available. The numerical results demonstrate that our proposed algorithms are capable of improving the system's performance compared to the benchmark schemes in terms of both the average delay and of the buffer overflow probability

Link Scheduling in UAV-Aided Networks

Unmanned Aerial Vehicles (UAVs) or drones are a type of low altitude aerial mobile vehicles. They can be integrated into existing networks; e.g., cellular, Internet of Things (IoT) and satellite networks. Moreover, they can leverage existing cellular or Wi-Fi infrastructures to communicate with one another. A popular application of UAVs is to deploy them as mobile base stations and/or relays to assist terrestrial wireless communications. Another application is data collection, whereby they act as mobile sinks for wireless sensor networks or sensor devices operating in IoT networks. Advantageously, UAVs are cost-effective and they are able to establish line-of-sight links, which help improve data rate. A key concern, however, is that the uplink communications to a UAV may be limited, where it is only able to receive from one device at a time. Further, ground devices, such as those in IoT networks, may have limited energy, which limit their transmit power. To this end, there are three promising approaches to address these concerns, including (i) trajectory optimization, (ii) link scheduling, and (iii) equipping UAVs with a Successive Interference Cancellation (SIC) radio. Henceforth, this thesis considers data collection in UAV-aided, TDMA and SICequipped wireless networks. Its main aim is to develop novel link schedulers to schedule uplink communications to a SIC-capable UAV. In particular, it considers two types of networks: (i) one-tier UAV communications networks, where a SIC-enabled rotary-wing UAV collects data from multiple ground devices, and (ii) Space-Air-Ground Integrated Networks (SAGINs), where a SIC-enabled rotary-wing UAV offloads collected data from ground devices to a swarm of CubeSats. A CubeSat then downloads its data to a terrestrial gateway. Compared to one-tier UAV communications networks, SAGINs are able to provide wide coverage and seamless connectivity to ground devices in remote and/or sparsely populated areas

Multiple Access in Aerial Networks: From Orthogonal and Non-Orthogonal to Rate-Splitting

Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has aroused. Specifically, UAVs can be used in cellular networks as aerial users for delivery, surveillance, rescue search, or as an aerial base station (aBS) for communication with ground users in remote uncovered areas or in dense environments requiring prompt high capacity. Aiming to satisfy the high requirements of wireless aerial networks, several multiple access techniques have been investigated. In particular, space-division multiple access(SDMA) and power-domain non-orthogonal multiple access (NOMA) present promising multiplexing gains for aerial downlink and uplink. Nevertheless, these gains are limited as they depend on the conditions of the environment. Hence, a generalized scheme has been recently proposed, called rate-splitting multiple access (RSMA), which is capable of achieving better spectral efficiency gains compared to SDMA and NOMA. In this paper, we present a comprehensive survey of key multiple access technologies adopted for aerial networks, where aBSs are deployed to serve ground users. Since there have been only sporadic results reported on the use of RSMA in aerial systems, we aim to extend the discussion on this topic by modelling and analyzing the weighted sum-rate performance of a two-user downlink network served by an RSMA-based aBS. Finally, related open issues and future research directions are exposed.Comment: 16 pages, 6 figures, submitted to IEEE Journa

A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence

Due to the advancements in cellular technologies and the dense deployment of cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the fifth-generation (5G) and beyond cellular networks is a promising solution to achieve safe UAV operation as well as enabling diversified applications with mission-specific payload data delivery. In particular, 5G networks need to support three typical usage scenarios, namely, enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine-type communications (mMTC). On the one hand, UAVs can be leveraged as cost-effective aerial platforms to provide ground users with enhanced communication services by exploiting their high cruising altitude and controllable maneuverability in three-dimensional (3D) space. On the other hand, providing such communication services simultaneously for both UAV and ground users poses new challenges due to the need for ubiquitous 3D signal coverage as well as the strong air-ground network interference. Besides the requirement of high-performance wireless communications, the ability to support effective and efficient sensing as well as network intelligence is also essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting aerial and ground users. In this paper, we provide a comprehensive overview of the latest research efforts on integrating UAVs into cellular networks, with an emphasis on how to exploit advanced techniques (e.g., intelligent reflecting surface, short packet transmission, energy harvesting, joint communication and radar sensing, and edge intelligence) to meet the diversified service requirements of next-generation wireless systems. Moreover, we highlight important directions for further investigation in future work.Comment: Accepted by IEEE JSA

Communications with spectrum sharing in 5g networks via drone-mounted base stations

The fifth generation wireless network is designed to accommodate enormous traffic demands for the next decade and to satisfy varying quality of service for different users. Drone-mounted base stations (DBSs) characterized by high mobility and low cost intrinsic attributes can be deployed to enhance the network capacity. In-band full-duplex (IBFD) is a promising technology for future wireless communications that can potentially enhance the spectrum efficiency and the throughput capacity. Therefore, the following issues have been identified and investigated in this dissertation in order to achieve high spectrum efficiency and high user quality of service. First, the problem of deploying DBSs is studied. Deploying more DBSs may increase the total throughput of the network but at the expense of the operation cost. The droNe-mounted bAse station PlacEment (NAPE) problem with consideration of IBFD communications and DBS backhaul is then formulated. The objective is to minimize the number of deployed DBSs while maximizing the total throughput of the network by incorporating IBFD-enabled communications for both access links and backhaul links via DBSs as relay nodes. A heuristic algorithm is proposed to solve the NAPE problem, and its performance is evaluated via extensive simulations. Second, the 3-D DBS placement problem is investigated as the communication efficiency is greatly affected by the positions of DBSs. Then, the DBS placement with IBFD communications (DSP-IBFD) problem for downlink communications is formulated, and two heuristic algorithms are proposed to solve the DSP-IBFD problem based on different DBS placement strategies. The performance of the proposed algorithms are demonstrated via extensive simulations. Third, the potential benefits of jointly optimizing the radio resource assignment and 3-D DBS placement are explored, upon which the Drone-mounted Base Station Placement with IBFD communications (DBSP-IBFD) problem is formulated. Since the DBSP-IBFD problem is NP-hard, it is then decomposed into two sub-problems: the joint bandwidth, power allocation and UE association problem and the DBS placement problem. A 1/2(1-/2^{l}})-approximation algorithm is proposed to solve the DBSP-IBFD problem based on the solutions to the two sub-problems, where l is the number of simulation runs. Simulation results demonstrate that the throughput of the proposed approximation algorithm is superior to benchmark algorithms. Fourth, the uplink communications is studied as the mobile users need to transmit and receive data to and from base stations. The Backhaul-aware Uplink communications in a full-duplex DBS-aided HetNet (BUD) problem is investigated with the objective to maximize the total throughput of the network while minimizing the number of deployed DBSs. Since the BUD problem is NP-hard, it is then decomposed into three sub-problems: the joint UE association, power and bandwidth assignment problem, the DBS placement problem and the problem of determining the number of DBSs to be deployed. The AA-BUD algorithm is proposed to solve the BUD problem with guaranteed performance based on the solutions to the three sub-problems, and its performance is demonstrated via extensive simulations. The future work comprises two parts. First, a DBS can be used to provide both communications and computing services to users. Thus, how to minimize the average latency of all users in a DBS-aided mobile edge computing network requires further investigation. Second, the short flying time of a drone limits the deployment and the performance of DBSs. Free space optics (FSO) can be utilized as the backhaul link and the energizer to provision both communication and energy to a DBS. How to optimize the charging efficiency while maximizing the total throughput of the network requires further investigation

Cache Enabled UAV HetNets Access xHaul Coverage Analysis and Optimal Resource Partitioning

We study an urban wireless network in which cache-enabled UAV-Access points (UAV-APs) and UAV-Base stations (UAV-BSs) are deployed to provide higher throughput and ad-hoc coverage to users on the ground. The cache-enabled UAV-APs route the user data to the core network via either terrestrial base stations (TBSs) or backhaul-enabled UAV-BSs through an xHaul link. First, we derive the association probabilities in the access and xHaul links. Interestingly, we show that to maximize the line-of-sight (LoS) unmanned aerial vehicle (UAV) association, densifying the UAV deployment may not be beneficial after a threshold. Then, we obtain the signal to interference noise ratio (SINR) coverage probability of the typical user in the access link and the tagged UAV-AP in the xHaul link, respectively. The SINR coverage analysis is employed to characterize the successful content delivery probability by jointly considering the probability of successful access and xHaul transmissions and successful cache-hit probability. We numerically optimize the distribution of frequency resources between the access and the xHaul links to maximize the successful content delivery to the users. For a given storage capacity at the UAVs, our study prescribes the network operator optimal bandwidth partitioning factors and dimensioning rules concerning the deployment of the UAV-APs

Self-Evolving Integrated Vertical Heterogeneous Networks

6G and beyond networks tend towards fully intelligent and adaptive design in order to provide better operational agility in maintaining universal wireless access and supporting a wide range of services and use cases while dealing with network complexity efficiently. Such enhanced network agility will require developing a self-evolving capability in designing both the network architecture and resource management to intelligently utilize resources, reduce operational costs, and achieve the coveted quality of service (QoS). To enable this capability, the necessity of considering an integrated vertical heterogeneous network (VHetNet) architecture appears to be inevitable due to its high inherent agility. Moreover, employing an intelligent framework is another crucial requirement for self-evolving networks to deal with real-time network optimization problems. Hence, in this work, to provide a better insight on network architecture design in support of self-evolving networks, we highlight the merits of integrated VHetNet architecture while proposing an intelligent framework for self-evolving integrated vertical heterogeneous networks (SEI-VHetNets). The impact of the challenges associated with SEI-VHetNet architecture, on network management is also studied considering a generalized network model. Furthermore, the current literature on network management of integrated VHetNets along with the recent advancements in artificial intelligence (AI)/machine learning (ML) solutions are discussed. Accordingly, the core challenges of integrating AI/ML in SEI-VHetNets are identified. Finally, the potential future research directions for advancing the autonomous and self-evolving capabilities of SEI-VHetNets are discussed.Comment: 25 pages, 5 figures, 2 table