17,184 research outputs found
Memory and information processing in neuromorphic systems
A striking difference between brain-inspired neuromorphic processors and
current von Neumann processors architectures is the way in which memory and
processing is organized. As Information and Communication Technologies continue
to address the need for increased computational power through the increase of
cores within a digital processor, neuromorphic engineers and scientists can
complement this need by building processor architectures where memory is
distributed with the processing. In this paper we present a survey of
brain-inspired processor architectures that support models of cortical networks
and deep neural networks. These architectures range from serial clocked
implementations of multi-neuron systems to massively parallel asynchronous ones
and from purely digital systems to mixed analog/digital systems which implement
more biological-like models of neurons and synapses together with a suite of
adaptation and learning mechanisms analogous to the ones found in biological
nervous systems. We describe the advantages of the different approaches being
pursued and present the challenges that need to be addressed for building
artificial neural processing systems that can display the richness of behaviors
seen in biological systems.Comment: Submitted to Proceedings of IEEE, review of recently proposed
neuromorphic computing platforms and system
A committee machine gas identification system based on dynamically reconfigurable FPGA
This paper proposes a gas identification system based on the committee machine (CM) classifier, which combines various gas identification algorithms, to obtain a unified decision with improved accuracy. The CM combines five different classifiers: K nearest neighbors (KNNs), multilayer perceptron (MLP), radial basis function (RBF), Gaussian mixture model (GMM), and probabilistic principal component analysis (PPCA). Experiments on real sensors' data proved the effectiveness of our system with an improved accuracy over individual classifiers. Due to the computationally intensive nature of CM, its implementation requires significant hardware resources. In order to overcome this problem, we propose a novel time multiplexing hardware implementation using a dynamically reconfigurable field programmable gate array (FPGA) platform. The processing is divided into three stages: sampling and preprocessing, pattern recognition, and decision stage. Dynamically reconfigurable FPGA technique is used to implement the system in a sequential manner, thus using limited hardware resources of the FPGA chip. The system is successfully tested for combustible gas identification application using our in-house tin-oxide gas sensors
Towards a Scalable Hardware/Software Co-Design Platform for Real-time Pedestrian Tracking Based on a ZYNQ-7000 Device
Currently, most designers face a daunting task to
research different design flows and learn the intricacies of
specific software from various manufacturers in
hardware/software co-design. An urgent need of creating a
scalable hardware/software co-design platform has become a key
strategic element for developing hardware/software integrated
systems. In this paper, we propose a new design flow for building
a scalable co-design platform on FPGA-based system-on-chip.
We employ an integrated approach to implement a histogram
oriented gradients (HOG) and a support vector machine (SVM)
classification on a programmable device for pedestrian tracking.
Not only was hardware resource analysis reported, but the
precision and success rates of pedestrian tracking on nine open
access image data sets are also analysed. Finally, our proposed
design flow can be used for any real-time image processingrelated
products on programmable ZYNQ-based embedded
systems, which benefits from a reduced design time and provide a
scalable solution for embedded image processing products
A sub-mW IoT-endnode for always-on visual monitoring and smart triggering
This work presents a fully-programmable Internet of Things (IoT) visual
sensing node that targets sub-mW power consumption in always-on monitoring
scenarios. The system features a spatial-contrast binary
pixel imager with focal-plane processing. The sensor, when working at its
lowest power mode ( at 10 fps), provides as output the number of
changed pixels. Based on this information, a dedicated camera interface,
implemented on a low-power FPGA, wakes up an ultra-low-power parallel
processing unit to extract context-aware visual information. We evaluate the
smart sensor on three always-on visual triggering application scenarios.
Triggering accuracy comparable to RGB image sensors is achieved at nominal
lighting conditions, while consuming an average power between and
, depending on context activity. The digital sub-system is extremely
flexible, thanks to a fully-programmable digital signal processing engine, but
still achieves 19x lower power consumption compared to MCU-based cameras with
significantly lower on-board computing capabilities.Comment: 11 pages, 9 figures, submitteted to IEEE IoT Journa
Recommended from our members
Technical Review of Residential Programmable Communicating Thermostat Implementation for Title 24-2008
A Comprehensive Workflow for General-Purpose Neural Modeling with Highly Configurable Neuromorphic Hardware Systems
In this paper we present a methodological framework that meets novel
requirements emerging from upcoming types of accelerated and highly
configurable neuromorphic hardware systems. We describe in detail a device with
45 million programmable and dynamic synapses that is currently under
development, and we sketch the conceptual challenges that arise from taking
this platform into operation. More specifically, we aim at the establishment of
this neuromorphic system as a flexible and neuroscientifically valuable
modeling tool that can be used by non-hardware-experts. We consider various
functional aspects to be crucial for this purpose, and we introduce a
consistent workflow with detailed descriptions of all involved modules that
implement the suggested steps: The integration of the hardware interface into
the simulator-independent model description language PyNN; a fully automated
translation between the PyNN domain and appropriate hardware configurations; an
executable specification of the future neuromorphic system that can be
seamlessly integrated into this biology-to-hardware mapping process as a test
bench for all software layers and possible hardware design modifications; an
evaluation scheme that deploys models from a dedicated benchmark library,
compares the results generated by virtual or prototype hardware devices with
reference software simulations and analyzes the differences. The integration of
these components into one hardware-software workflow provides an ecosystem for
ongoing preparative studies that support the hardware design process and
represents the basis for the maturity of the model-to-hardware mapping
software. The functionality and flexibility of the latter is proven with a
variety of experimental results
Principles of Neuromorphic Photonics
In an age overrun with information, the ability to process reams of data has
become crucial. The demand for data will continue to grow as smart gadgets
multiply and become increasingly integrated into our daily lives.
Next-generation industries in artificial intelligence services and
high-performance computing are so far supported by microelectronic platforms.
These data-intensive enterprises rely on continual improvements in hardware.
Their prospects are running up against a stark reality: conventional
one-size-fits-all solutions offered by digital electronics can no longer
satisfy this need, as Moore's law (exponential hardware scaling),
interconnection density, and the von Neumann architecture reach their limits.
With its superior speed and reconfigurability, analog photonics can provide
some relief to these problems; however, complex applications of analog
photonics have remained largely unexplored due to the absence of a robust
photonic integration industry. Recently, the landscape for
commercially-manufacturable photonic chips has been changing rapidly and now
promises to achieve economies of scale previously enjoyed solely by
microelectronics.
The scientific community has set out to build bridges between the domains of
photonic device physics and neural networks, giving rise to the field of
\emph{neuromorphic photonics}. This article reviews the recent progress in
integrated neuromorphic photonics. We provide an overview of neuromorphic
computing, discuss the associated technology (microelectronic and photonic)
platforms and compare their metric performance. We discuss photonic neural
network approaches and challenges for integrated neuromorphic photonic
processors while providing an in-depth description of photonic neurons and a
candidate interconnection architecture. We conclude with a future outlook of
neuro-inspired photonic processing.Comment: 28 pages, 19 figure
- …