Adaptive multi-channel MAC protocol for dense VANET with directional antennas

Directional antennas in Ad hoc networks offer more benefits than the traditional antennas with omni-directional mode. With directional antennas, it can increase the spatial reuse of the wireless channel. A higher gain of directional antennas makes terminals a further transmission range and fewer hops to the destination. This paper presents the design, implementation and simulation results of a multi-channel Medium Access Control (MAC) protocols for dense Vehicular Ad hoc Networks using directional antennas with local beam tables. Numeric results show that our protocol performs better than the existing multichannel protocols in vehicular environment

Study on QoS support in 802.11e-based multi-hop vehicular wireless ad hoc networks

Multimedia communications over vehicular ad hoc networks (VANET) will play an important role in the future intelligent transport system (ITS). QoS support for VANET therefore becomes an essential problem. In this paper, we first study the QoS performance in multi-hop VANET by using the standard IEEE 802.11e EDCA MAC and our proposed triple-constraint QoS routing protocol, Delay-Reliability-Hop (DeReHQ). In particular, we evaluate the DeReHQ protocol together with EDCA in highway and urban areas. Simulation results show that end-to-end delay performance can sometimes be achieved when both 802.11e EDCA and DeReHQ extended AODV are used. However, further studies on cross-layer optimization for QoS support in multi-hop environment are required

Design and analysis of a beacon-less routing protocol for large volume content dissemination in vehicular ad hoc networks

Largevolumecontentdisseminationispursuedbythegrowingnumberofhighquality applications for Vehicular Ad hoc NETworks(VANETs), e.g., the live road surveillance service and the video-based overtaking assistant service. For the highly dynamical vehicular network topology, beacon-less routing protocols have been proven to be efficient in achieving a balance between the system performance and the control overhead. However, to the authors’ best knowledge, the routing design for large volume content has not been well considered in the previous work, which will introduce new challenges, e.g., the enhanced connectivity requirement for a radio link. In this paper, a link Lifetime-aware Beacon-less Routing Protocol (LBRP) is designed for large volume content delivery in VANETs. Each vehicle makes the forwarding decision based on the message header information and its current state, including the speed and position information. A semi-Markov process analytical model is proposed to evaluate the expected delay in constructing one routing path for LBRP. Simulations show that the proposed LBRP scheme outperforms the traditional dissemination protocols in providing a low end-to-end delay. The analytical model is shown to exhibit a good match on the delay estimation with Monte Carlo simulations, as well

Models and Performance of VANET based Emergency Braking

The network research community is working in the field of automotive to provide VANET based safety applications to reduce the number of accidents, deaths, injuries and loss of money. Several approaches are proposed and investigated in VANET literature, but in a completely network-oriented fashion. Most of them do not take into account application requirements and no one considers the dynamics of the vehicles. Moreover, message repropagation schemes are widely proposed without investigating their benefits and using very complicated approaches. This technical report, which is derived from the Master Thesis of Michele Segata, focuses on the Emergency Electronic Brake Lights (EEBL) safety application, meant to send warning messages in the case of an emergency brake, in particular performing a joint analysis of network requirements and provided application level benefits. The EEBL application is integrated within a Collaborative Adaptive Cruise Control (CACC) which uses network-provided information to automatically brake the car if the driver does not react to the warning. Moreover, an information aggregation scheme is proposed to analyze the benefits of repropagation together with the consequent increase of network load. This protocol is compared to a protocol without repropagation and to a rebroadcast protocol found in the literature (namely the weighted p-persistent rebroadcast). The scenario is a highway stretch in which a platoon of vehicles brake down to a complete stop. Simulations are performed using the NS_3 network simulation in which two mobility models have been embedded. The first one, which is called Intelligent Driver Model (IDM) emulates the behavior of a driver trying to reach a desired speed and braking when approaching vehicles in front. The second one (Minimizing Overall Braking Induced by Lane change (MOBIL)), instead, decides when a vehicle has to change lane in order to perform an overtake or optimize its path. The original simulator has been modified by - introducing real physical limits to naturally reproduce real crashes; - implementing a CACC; - implementing the driver reaction when a warning is received; - implementing different network protocols. The tests are performed in different situations, such as different number of lanes (one to five), different average speeds, different network protocols and different market penetration rates and they show that: - the adoption of this technology considerably decreases car accidents since the overall average maximum deceleration is reduced; - network load depends on application-level details, such as the implementation of the CACC; - VANET safety application can improve safety even with a partial market penetration rate; - message repropagation is important to reduce the risk of accidents when not all vehicles are equipped; - benefits are gained not only by equipped vehicles but also by unequipped ones

Vehicle to vehicle (V2V) wireless communications

This work focuses on the vehicle-to-vehicle (V2V) communication, its current challenges, future perspective and possible improvement.V2V communication is characterized by the dynamic environment, high mobility, nonpredective scenario, propagation effects, and also communicating antenna's positions. This peculiarity of V2V wireless communication makes channel modelling and the vehicular propagation quite challenging. In this work, firstly we studied the present context of V2V communication also known as Vehicular Ad-hoc Netwok (VANET) including ongoing researches and studies particularly related to Dedicated Short Range Communication (DSRC), specifically designed for automotive uses with corresponding set of protocols and standards. Secondly, we focused on communication models and improvement of these models to make them more suitable, reliable and efficient for the V2V environment. As specifies the standard, OFDM is used in V2V communication, Adaptable OFDM transceiver was designed. Some parameters as performance analytics are used to compare the improvement with the actual situation. For the enhancement of physical layer of V2V communication, this work is focused in the study of MIMO channel instead of SISO. In the designed transceiver both SISO and MIMO were implemented and studied successfully

Evaluation study of IEEE 1609.4 performance for safety and non-safety messages dissemination

The IEEE 1609.4 was developed to support multi-channel operation and channel switching procedure in order to provide both safety and non-safety vehicular applications. However, this protocol has some drawback because it does not make efficient usage of channel bandwidth resources for single radio WAVE devices and suffer from high bounded delay and lost packet especially for large-scale networks in terms of the number of active nodes. This paper evaluates IEEE 1609.4 multi-channel protocol performance for safety and non-safety application and compare it with the IEEE 802.11p single channel protocol. Multi-channel and single channel protocols are analyzed in different environments to investigate their performance. By relying on a realistic dataset and using OMNeT++ simulation tool as network simulator, SUMO as traffic simulator and coupling them by employing Veins framework. Performance evaluation results show that the delay of single channel protocol IEEE 802.11p has been degraded 36% compared with multi-channel protocol

Mobile ad hoc networks for intelligent systems

Advances in wireless technology and portable computing along with demands for high user mobility have provided a major promotion toward the development of ad hoc networks. Mobile ad hoc networks feature dynamic topology, self-organization, limited bandwidth and battery power of a node. They do not rely on specialized routers for path discovery and traffic routing. Research on ad hoc networks has been extensively investigated in the past few years and related work has focused on many of the layers of the communications architecture. This research intends to investigate applications of MANET for intelligent systems, including intelligent transportation system (ITS), sensor network and mobile intelligent robot network, and propose some approaches to topology management, link layer multiple access and routing algorithms. Their performance is evaluated by theoretical analysis and off-the-shelf simulation tools. Most current research on ad hoc networks assumes the availability of IEEE 802.11. However, the RTS/CTS protocol of 802.11 still leads to packet collision which in turn decreases the network throughput and lifetime. For sensor networks, sensors are mostly battery operated. Hence, resolving packet collision may improve network lifetime by saving valuable power. Using space and network diversity combination, this work proposes a new packet separation approach to packet collision caused by masked nodes. Inter-vehicle communication is a key component of ITS and it is also called vehicular ad hoc network. VANET has many features different from regular MANETs in terms of mobility, network size and connectivity. Given rapid topology changes and network partitioning, this work studies how to organize the numerous vehicular nodes and establish message paths between any pair of vehicular nodes if they are not apart too far away. In urban areas, the inter-vehicle communication has different requirements and constraints than highway environments. The proposed position-based routing strategy for VANETs utilizes the traffic pattern in city environments. Packets are forwarded based on traffic lights timing sequence and the moving direction of relaying vehicles. A multicast protocol is also introduced to visualize the real time road traffic with customized scale. Only vehicles related to a source node\u27s planned trajectory will reply the query packet. The visualized real time traffic information therefore helps the driver make better decision in route planning when traffic congestion happens. Nowadays robots become more and more powerful and intelligent. They can take part in operations in a cooperative manner which makes distributed control necessary. Ad hoc robot communication network is still fresh field for researchers working on networking technology. This work investigates some key issues in robot ad hoc network and evaluate the challenges while establishing robot ad hoc networks

Design and Evaluation of Efficient Medium Access Control Solutions for Vehicular Environments

[EN] In recent years, advances in wireless technologies and improved sensing and computational capabilities have led to a gradual transition towards Intelligent Transportation Systems (ITS) and related applications. These applications aim at improving road safety, provide smart navigation, and eco-friendly driving. Vehicular Ad hoc Networks (VANETs) provide a communication structure for ITS by equipping cars with advanced sensors and communication devices that enable a direct exchange of information between vehicles. Different types of ITS applications rely on two types of messages: periodic beacons and event-driven messages. Beacons include information such as geographical location, speed, and acceleration, and they are only disseminated to a close neighborhood. Differently from beacons, event-driven messages are only generated when a critical event of general interest occurs, and it is spread within a specific target area for the duration of the event. The reliability of information exchange is one of the main issues for vehicularcommunications since the safety of people on the road is directly related to the effectiveness of these transmissions. A Medium Access Control (MAC) protocol must guarantee reliable beacon broadcasting within deadline bounds to all vehicles in the neighbourhood, thereby providing them timely notifications about unsafe driving conditions or other hazardous events. Moreover, infotainment and comfort applications require reliable unicast transmissions that must be taken into account. However, high node mobility, highly dynamic topology, and lack of a central control unit, are issues that make the design of a reliable MAC protocol for vehicular environments a very difficult and challenging task, especially when efficient broadcasting strategies are required. The IEEE 802.11p MAC protocol, an approved amendment to the IEEE 802.11 standard, is a random access protocol that is unable to provide guaranteed delay bounds with sufficient reliability in vehicular scenarios, especially under high channel usage. This problem is particularly serious when implementing (semi-) automated driving applications such as platooning, where inter-vehicle spacing is drastically reduced, and the control loop that manages and maintains the platoon requires frequent, timely and reliable exchange of status information (beacons). In this thesis novel protocols compatible with the IEEE 802.11 and 802.11p standards are proposed in order to optimally adjust the contention window size for unicast applications in Mobile Ad hoc Networks (MANETs) and VANETs. Experimental tests comparing our proposals to existing solutions show that the former are able to improve the packet delivery ratio and the average end-to-end delay for unicast applications. Concerning efficient message diffusion (broadcast) in VANET environments, we proposed token-based MAC solutions to improve the performance achieved by existing 802.11p driving safety applications in different vehicular environments, including highway, urban, and platooning scenarios. Experimental results show that the proposed solutions clearly outperform 802.11p when delay-bounded beacons and event notifications must be delivered.[ES] Recientemente, los avances en las tecnologías inalámbricas y las mejoras en términos de capacidades de sensorización y computación de los dispositivos electrónicos, han dado lugar a una transición gradual hacia servicios y aplicaciones de los Sistemas Inteligentes de Transporte (ITS). Estas aplicaciones tienen como objetivo mejorar la seguridad vial, proporcionar una navegación inteligente, y promover la conducción eco-eficiente. Las redes vehiculares ad hoc (VANETs) proporcionan una infraestructura de comunicaciones para ITS al equipar los coches con sensores avanzados y dispositivos de comunicación que permiten el intercambio directo de información entre vehículos. Los diferentes tipos de aplicaciones ITS se basan en dos tipos de mensajes: mensajes periódicos conocidos como beacons y mensajes asociados a eventos. Los mensajes periódicos incluyen información relativa a la ubicación geográfica, la velocidad y la aceleración, entre otros, y sólo son distribuidos entre los vehículos vecinos. A diferencia de estos beacons, los mensajes asociados a eventos sólo se generan cuando se produce un evento crítico de interés general, el cual se propaga dentro del área de interés de dicho evento y mientras éste siga activo. La fiabilidad del intercambio de información es uno de los principales problemas para las comunicaciones vehiculares, debido principalmente a que las aplicaciones de seguridad dependen directamente de la eficacia de estas transmisiones. Un protocolo de Control de Acceso al Medio (MAC) debe garantizar la difusión fiable de información a todos los vehículos vecinos dentro de unos límites máximos de retardo, proporcionándoles las notificaciones oportunas respecto a condiciones de conducción inseguras y otros eventos peligrosos. Por otra parte, las aplicaciones de información y entretenimiento, así como las aplicaciones orientadas al confort, también requieren transmisiones fiables extremoa-extremo. Sin embargo, la alta movilidad de los vehículos, la variabilidad de la topología, así como la falta de una unidad central de control, son factores que hacen que el diseño de un protocolo MAC fiable para entornos vehiculares sea una tarea especialmente compleja, especialmente cuando son necesarias estrategias de difusión eficientes. El protocolo MAC IEEE 802.11p, una modificación ya aprobada al estándar IEEE 802.11 original para entornos de comunicación vehiculares, es un protocolo de acceso que no es capaz de garantizar unos límites de retardo con la fiabilidad necesaria para estos entornos, especialmente en escenarios de alta utilización del canal inalámbrico. Este problema es particularmente importante a la hora de implementar aplicaciones de conducción (semi-)automática, como el caso de grupos de vehículos donde la separación entre vehículos se reduce drásticamente, y el sistema de control que gestiona y mantiene el grupo requiere de un intercambio frecuente de información fiable y acotado en retardo. En esta tesis se proponen nuevos protocolos MAC compatibles con los estándares IEEE 802.11 y 802.11p basados en el ajuste del tamaño de la ventana de contención para aplicaciones unicast en rede MANETs y VANETs. Los resultados experimentales obtenidos comparando nuestras propuestas con las soluciones existentes muestran que los protocolos propuestos son capaces de mejorar la tasa de entrega de paquetes y el retardo medio extremo-a-extremo para aplicaciones unicast. En lo que respecta a la difusión eficiente de mensajes broadcast en entornos VANET, se han propuesto soluciones MAC basadas en el uso de tokens que mejoran las prestaciones de aplicaciones de conducción segura basadas en el estándar 802.11p, tanto en autopistas, zonas urbanas, y escenarios con grupos de vehículos. Los resultados experimentales muestran que las soluciones propuestas superan claramente al protocolo 802.11p cuando es necesario entregar mensajes y notificaciones de eventos con restricc[CA] Recentment, els avan en les tecnologies sense fils i les millores en termes de capacitats de sensorització i computació dels dispositius electrònics, han donat lloc a una transició gradual cap a serveis i aplicacions dels sistemes intelligents de transport (ITS). Aquestes aplicacions tenen com a objectiu millorar la seguretat vial, proporcionar una navegació intelligent, i promoure la conducció ecoeficient. Les xarxes vehiculars ad hoc (VANET) proporcionen una infraestructura de comunicacions per a ITS, ja que equipen els cotxes amb sensors avançats i dispositius de comunicació que permeten l'intercanvi directe d'informació entre vehicles. Els diversos tipus d'aplicacions ITS es basen en dos classes de missatges: missatges periòdics coneguts com a beacons i missatges associats a esdeveniments. Els missatges periòdics inclouen informació relativa a la ubicació geogràfica, la velocitat i l'acceleració, entre uns altres, i només són distribuïts entre els vehicles veïns. A diferència d'aquests beacons, els missatges associats a esdeveniments només es generen quan es produeix un esdeveniment crític d'interès general, el qual es propaga dins de l àrea d'interès d'aquest esdeveniment i mentre aquest seguisca actiu. La fiabilitat de l'intercanvi d'informació és un dels principals problemes per a les comunicacions vehicular, principalment perquè les aplicacions de seguretat depenen directament de l'eficàcia d'aquestes transmissions. Un protocol de control d'accés al medi (MAC) ha de garantir la difusió fiable d'informació a tots els vehicles veïns dins d'uns límits màxims de retard, i proporcionar-los les notificacions oportunes respecte a condicions de conducció insegures i altres esdeveniments perillosos. D'altra banda, les aplicacions d'informació i entreteniment, com també les aplicacions orientades al confort, també requereixen transmissions fiables extrema-extrem. No obstant això, l'alta mobilitat dels vehicles, la variabilitat de la topologia, i la falta d'una unitat central de control, són factors que fan que el disseny d'un protocol MAC fiable per a entorns vehiculars siga una tasca especialment complexa, especialment quan són necessàries estratègies de difusió eficients. El protocol MAC IEEE 802.11p, una modificació ja aprovada a l'estàndard IEEE 802.11 original per a entorns de comunicació vehiculars, és un protocol d'accés que no és capa garantir uns límits de retard amb la fiabilitat necessària per a aquests entorns, especialment en escenaris d'alta utilització del canal sense fil. Aquest problema és particularment important a l'hora d'implementar aplicacions de conducció (semi)automàtica, com el cas de grups de vehicles en què la separació entre vehicles es redueix dràsticament, i el sistema de control que gestiona i manté el grup requereix un intercanvi freqüent d'informació fiable i delimitat en retard. En aquesta tesi es proposen nous protocols MAC compatibles amb els estàndards IEEE 802.11 i 802.11p basats en l'ajust de les dimensions de la finestra de contenció per a aplicacions unicast en xarxes MANET i VANET. Els resultats experimentals obtinguts comparant les nostres propostes amb les solucions existents mostren que els protocols proposats són capa de millorar la taxa de lliurament de paquets i el retard mitjà extrem-a-extrem per a aplicacions unicast. Pel que fa a la difusió eficient de missatges broadcast en entorns VANET, s'han proposat solucions MAC basades en l'ús de tokens que milloren les prestacions d'aplicacions de conducció segura basades en l'estàndard 802.11p, tant en autopistes, zones urbanes, i escenaris amb grups de vehicles. Els resultats experimentals mostren que les solucions proposades superen clarament el protocol 802.11p quan cal lliurar missatges i notificacions d'esdeveniments amb restriccions de latència.Balador, A. (2016). Design and Evaluation of Efficient Medium Access Control Solutions for Vehicular Environments [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/64073TESI