3,602 research outputs found
Surface contamination of cars : a review
This review surveys the problem of surface contamination for cars, which poses a growing engineering challenge to vehicle manufacturers, operators and users. Both drivers’ vision and vehicle visibility need to be maintained under a wide range of environmental conditions. This requires managing the flow of surface water on wind screens and side glazing. The rate of deposition of solid contaminants on glazing, lights, license plates and external mirrors also needs to be minimised. Maintaining vehicle aesthetics and limiting the transfer of contaminants to the hands and clothes of users from soiled surfaces are also significant issues. Recently, keeping camera lenses clean has emerged as a key concern, as these systems transition from occasional manoeuvring aids to sensors for safety systems. The deposition of water and solid contaminants onto car surfaces is strongly influenced by unsteady vehicle aerodynamic effects. Airborne water droplets falling as rain or lifted as spray by tyres interact with wakes, vortices and shear flows and accumulate on vehicle surfaces as a consequence. The same aerodynamic effects also control the movement of surface water droplets, rivulets and films; hence, particular attention is paid to surface water management over the front side-glass and the deposition of contaminants on the rear surfaces. The test methods used in the automotive industry are reviewed, as are numerical simulation techniques
The effect of short-term changes in air pollution on respiratory and cardiovascular morbidity in Nicosia, Cyprus.
Presented at the 6th International Conference on Urban Air Quality, Limassol, March, 2007. Short-paper was submitted for peer-review and appears in proceedings of the conference.This study investigates the effect of daily changes in levels of PM10 on the daily volume of respiratory and cardiovascular
admissions in Nicosia, Cyprus during 1995-2004. After controlling for long- (year and month) and short-term (day of the
week) patterns as well as the effect of weather in Generalized Additive Poisson models, some positive associations were
observed with all-cause and cause-specific admissions. Risk of hospitalization increased stepwise across quartiles of days with
increasing levels of PM10 by 1.3% (-0.3, 2.8), 4.9% (3.3, 6.6), 5.6% (3.9, 7.3) as compared to days with the lowest
concentrations. For every 10μg/m3 increase in daily average PM10 concentration, there was a 1.2% (-0.1%, 2.4%) increase in
cardiovascular admissions. With respects to respiratory admissions, an effect was observed only in the warm season with a
1.8% (-0.22, 3.85) increase in admissions per 10μg/m3 increase in PM10. The effect on respiratory admissions seemed to be
much stronger in women and, surprisingly, restricted to people of adult age
Energy simulation of climatic wind tunnel plant
The Climatic Wind Tunnel (CWT) is a facility used by the motor industry to test
vehicles under climatic extremes without the need for expensive overseas test
programs.
This work focuses on the application of computer simulation to the Heating
Ventilation and Air Conditioning (HVAC) plant that makes up a CWT facility. The
objective being to reduce its operational costs through the identification of energy
saving operational strategies.
When in operation the CWT has a peak power consumption of 3MW. The
implementation of any measures that would reduce this peak load would give rise to
considerable savings in the operating costs of the facility.
Computer simulation is an accepted technique for the study of systems operating
under varying load conditions. Simulation allows rapid analysis of different strategies
for operating plant and the effectiveness of achieving the desired effect without
compromising the buildings performance.
Models for the components of the CWT have been developed and coded in Neutral
Model Format. These models have then been linked together in a modular simulation
environment to give a model of the complete plant. The CWT plant naturally
decomposesin to four major subsystems these being the test chamber, the soakroom,
air make-up and refrigeration system. Models of all the primary and secondary HVAC plant are described as is how they
constitute the systems that make up the CWT. Validation tests for individual
components as well as for the systems have been carried out.
To illustrate the potential of the application of computer simulation into finding
improved modes of operation that would reduce the energy consumption of the
facility, four studies have been carried out. The studies involve the possibility of
scheduling the operation of condenser fans as a function of refrigeration load and
outside ambient temperature, methods for the pre-test conditioning of a vehicle, a
reduction in the secondary refrigerant flow temperature and an increase in the
thickness of the insulated panels from which the facility is constructed. The studies
carried out showed that there was potential for moderate energy savings to be made
in the operation of the facility and that extended simulation runs would allow for the
in-depth assessment of a large range of possible modes of plant operation in order to
identify the areas where the greatest savings are possible
The Effect of Water Evaporation in Automotive Windshield Defrosting
Water evaporation during windshield defrosting is investigated paying particular attention to the effects of air humidity and wind speed. During the defrosting process, the ice layer on the windshield begins to melt as the temperature of the defrost air increases. Results have shown that the ice-turned-water can evaporate depending upon the ambient air humidity level and the wind speed. Water evaporation takes the heat otherwise available for melting, thereby delaying the ice melting process. It is found that at low wind speeds the effect of air humidity in delaying the ice-melting is minimal. However, at high wind speeds, (>10 m/s) water evaporation can take enough heat away from melting, thereby significantly reducing the ice removal rate. In relation to this, driver safety concerns associated with the reduction of ice melting rate are discussed
Adaptation to Climate Change at Local Scale: A CFD Study in Porto Urban Area
Green infrastructures play an essential role in urban planning, namely with their potential to reduce the impact from air pollution episodes together with extreme weather events. This chapter focuses on the assessment of green infrastructures’ benefits on current and future microclimate and air quality patterns in Porto’s urban area (Portugal). The effects of green infrastructures on flow dynamics are evaluated for the baseline scenarios by means of numerical and physical simulations, using the computational fluid dynamics (CFD) model VADIS and the wind tunnel of the University of Aveiro. The baseline morphological (BM) scenario focuses on the current morphological characteristics of Porto’s urban area, while a baseline green (BG) scenario comprises the replacement of built-up areas by green areas and parks. In addition, the benefits of green infrastructures on air quality are assessed for the baseline and under future climate scenarios. The air quality simulations focus on particulate matter, one of the most critical air pollutants with severe impacts on human health. For the BM scenario, the simulated concentrations are compared with hourly averaged PM10 concentrations measured during a weekday at the air quality station located within the study domain
Aeronautical Engineering: A special bibliography with indexes, supplement 74
This special bibliography lists 295 reports, articles, and other documents introduced into the NASA scientific and technical information system in August 1976
Aeronautical Engineering. A continuing bibliography with indexes, supplement 156
This bibliography lists 288 reports, articles and other documents introduced into the NASA scientific and technical information system in December 1982
Design and testing methodologies for UAVs under extreme environmental conditions
L'abstract è presente nell'allegato / the abstract is in the attachmen
Aeronautical Engineering: A special bibliography with indexes, supplement 55
This bibliography lists 260 reports, articles, and other documents introduced into the NASA scientific and technical information system in February 1975
- …