13 research outputs found
Simulation of FinFET Structures
The intensive downscaling of MOS transistors has been the major driving force behind the aggressive increases in transistor density and performance, leading to more chip functionality at higher speeds. While on the other side the reduction in MOSFET dimensions leads to the close proximity between source and drain, which in turn reduces the ability of the gate electrode to control the potential distribution and current flow in the channel region and also results in some undesirable effects called the short-channel effects. These limitations associated with downscaling of MOSFET device geometries have lead device designers and researchers to number of innovative techniques which include the use of different device structures, different channel materials, different gate-oxide materials, different processes such as shallow trench isolation, source/drain silicidation, lightly doped extensions etc. to enable controlled device scaling to smaller dimensions. A lot of research and development works have been done in these and related fields and more remains to be carried out in order to exploit these devices for the wider applications
Variability analysis of FinFET AC/RF performances through efficient physics-based simulations for the optimization of RF CMOS stages
A nearly insatiable appetite for the latest electronic device enables the electronic technology sector to maintain research momentum. The necessity for advancement with miniaturization of electronic devices is the need of the day. Aggressive downscaling of electronic devices face some fundamental limits and thus, buoy up the change in device geometry. MOSFETs have been the leading contender in the electronics industry for years, but the dire need for miniaturization is forcing MOSFET to be scaled to nano-scale and in sub-50 nm scale. Short channel effects (SCE) become dominant and adversely affect the performance of the MOSFET. So, the need for a novel structure was felt to suppress SCE to an acceptable level. Among the proposed devices, FinFETs (Fin Field Effect Transistors) were found to be most effective to counter-act SCE in electronic devices. Today, many industries are working on electronic circuits with FinFETs as their primary element.One of limitation which FinFET faces is device variability.
The purpose of this work was to study the effect that different sources of parameter fluctuations have on the behavior and characteristics of FinFETs. With deep literature review, we have gained insight into key sources of variability. Different sources of variations, like random dopant fluctuation, line edge roughness, fin variations, workfunction variations, oxide thickness variation, and source/drain doping variations, were studied and their impact on the performance of the device was studied as well. The adverse effect of these variations fosters the great amount of research towards variability modeling.
A proper modeling of these variations is required to address the device performance metric before the fabrication of any new generation of the device on the commercial scale. The conventional methods to address the characteristics of a device under variability are Monte-Carlo-like techniques. In Monte Carlo analysis, all process parameters can be varied individually or simultaneously in a more realistic approach. The Monte Carlo algorithm takes a random value within the range of each process parameter and performs circuit simulations repeatedly. The statistical characteristics are estimated from the responses. This technique is accurate but requires high computational resources and time. Thus, efforts are being put by different research groups to find alternative tools. If the variations are small, Green’s Function (GF) approach can be seen as a breakthrough methodology.
One of the most open research fields regards "Variability of FinFET AC performances". One reason for the limited AC variability investigations is the lack of commercially available efficient simulation tools, especially those based on accurate physics-based analysis: in fact, the only way to perform AC variability analysis through commercial TCAD tools like Synopsys Sentaurus is through the so-called Monte Carlo approach, that when variations are deterministic, is more properly referred to as incremental analysis, i.e., repeated solutions of the device model with varying physical parameters. For each selected parameter, the model must be solved first in DC operating condition (working point, WP) and then linearized around the WP, hence increasing severely the simulation time. In this work, instead, we used GF approach, using our in-house Simulator "POLITO", to perform AC variability analysis, provided that variations are small, alleviating the requirement of double linearization and reducing the simulation time significantly with a slight trade-off in accuracy. Using this tool we have, for the first time addressed the dependency of FinFET AC parameters on the most relevant process variations, opening the way to its application to RF circuits.
This work is ultimately dedicated to the successful implementation of RF stages in commercial applications by incorporating variability effects and controlling the degradation of AC parameters due to variability. We exploited the POLITO (in-house simulator) limited to 2D structures, but this work can be extended to the variability analysis of 3D FinFET structure. Also variability analysis of III-V Group structures can be addressed. There is also potentiality to carry out the sensitivity analysis for the other source of variations, e.g., thermal variations
Multigate MOSFETs for digital performance and high linearity, and their fabrication techniques
The aggressive downscaling of complementary metal–oxide–semiconductor (CMOS) technology is facing great challenges to overcome severe short-channel effects. Multigate MOSFETs are one of the most promising candidates for scaling beyond Si CMOS, due to better electrostatic control as compared to conventional planar MOSFETs.
Conventional dry etching-induced surface damage is one of the main sources of performance degradation for multigate transistors, especially for III-V high mobility materials. It is also challenging to increase the fin aspect ratio by dry etching because of the non-ideal anisotropic etching profile. Here, we report a novel method, inverse metal-assisted chemical etching (i-MacEtch), in lieu of conventional RIE etching, for 3D fin channel formation. InP junctionless FinFETs with record high-aspect-ratio (~ 50:1) fins are demonstrated by this method for the first time. The i-MacEtch process flow eliminates dry-etching-induced plasma damage, high energy ion implantation damage, and high temperature annealing, allowing for the fabrication of InP fin channels with atomically smooth sidewalls. The sidewall features resulting from this unique and simplified process ensure high interface quality between high-k dielectric layer and InP fin channel. Experimental and theoretical analyses show that high-aspect-ratio FinFETs, which could deliver more current per area under much relaxed horizontal geometry requirements, are promising in pushing the technology node ahead where conventional scaling has met its physical limits.
The performance of the FinFET was further investigated through numerical simulation. A new kind of FinFET with asymmetric gate and source/drain contacts has been proposed and simulated. By benchmarking with conventional symmetric FinFET, better short-channel behavior with much higher current density is confirmed. The design guidelines are provided. The overall circuit delay can be minimized by optimizing gate lengths according to different local parasites among circuits in interconnection-delay-dominated SoC applications.
Continued transistor scaling requires even stronger gate electrostatic control over the channel. The ultimate scaling structure would be gate-all-around nanowire MOSFETs. We demonstrate III-V junctionless gate-all-around (GAA) nanowire (NW) MOSFETs for the first time. For the first time, source/drain (S/D) resistance and thermal budget are minimized by regrowth using metalorganic chemical vapor deposition (MOCVD) in III-V MOSFETs. The fabricated short-channel (Lg=80 nm) GaAs GAA NWFETs with extremely narrow nanowire width (WNW= 9 nm) show excellent transconductance (gm) linearity at biases (300 mV), characterized by the high third intercept point (2.6 dBm). The high linearity is especially important for low power applications because it is insensitive to bias conditions
Caractérisation électrique des propriétés d'interface dans les MOSFET nanométriques par des mesures de bruit basse fréquence
In this thesis, electrical properties of gate oxide/channel interface in ultra-scaled nanowire (NW) MOSFETs were experimentally investigated by carrier transport and low-frequency noise (LFN) characterizations. NW FETs, which have aggressively downscaled cross-section of the body, are strong candidates for near future CMOS node. However, the interface quality could be a critical issue due to the large surface/volume ratio, the multiple surface orientations, and additional strain technology to enhance the performance. Understanding of carrier transport and channel interface quality in NW FETs with advanced high-k/metal gate is thus particularly important. LFN provides deep insights into the interface properties of MOSFET without lower limit of required channel size. LFN measurement thus can be a powerful technique for ultra-scaled NW FETs. Also, fitting mobility (such as low-field mobility) extraction by Y-function method is an efficient method. Omega-gate NW FETs were fabricated from FD-SOI substrates, and with Hf-based high-k/metal gate (HfSiON/TiN), reducing detrimental effects by device downscaling. In addition, strain technologies to the channel were additively processed. Tensile strained-SOI substrate was used for NMOS, whereas compressive stressors were used for PMOS devices. Strained Si channel for PMOS was processed by raised SiGe S/D and CESL formations. Strained SiGe channel (SGOI) was also fabricated for further high-performance PMOS FETs. Firstly, the most common Id-Vg was characterized in single-channel NW FETs as the basic performance. Reference SOI NWs provided the excellent static control down to short channel of 17nm. Stressors dramatically enhanced on-current owing to a modification of channel energy-band structure. Then, extracted low-field mobility in NWs also showed large improvement of the performance by stressors. The mobility extraction effectively evaluated FET performance even for ultra-scaled NWs. Next, LFN investigated for various technological and architectural parameters. Carrier number fluctuations with correlated mobility fluctuations (CNF+CMF) model described 1/f noise in all our FETs down to the shortest NWs. Drain current noise behavior was basically similar in both N- and PMOS FETs regardless of technological splits. Larger 1/f noise stemming from S/D regions in PMOS FETs was perfectly interpreted by the CNF+CMF model completed with Rsd fluctuations. This observation highlighted an advantage of SGOI NW with the lowest level of S/D region noise. Geometrical variations altered the CNF component with simple impact of device scaling (reciprocal to both Wtot and Lg). No large impact of surface orientation difference between the channel (100) top and (110) side-walls in [110]-oriented NWs was observed. Scaling regularity with both Wtot and Lg, without much quantum effect, could be attributed to the use of HfSiON/TiN gate and carrier transport occurring mostly near top and side-wall surfaces even in NW geometry. Meanwhile, the CMF factor was not altered by decreasing dimensions, while the mobility strongly depends on the impact. Extracted oxide trap density was roughly steady with scaling, structure, and technological parameter impacts. Simple separation method of the contributions between channel top surface and side-walls was demonstrated in order to evaluate the difference. It revealed that oxide quality on (100) top and (110) side-walls was roughly comparable in all the [110]-devices. The density values lie in similar order as the recent reports. An excellent quality of the interface with HfSiON/TiN gate was thus sustained for all our technological and geometrical splits. Finally, our NWs fulfilled 1/f LFN requirements stated in the ITRS 2013 for future MG CMOS logic node. Consequently, we concluded that appropriate strain technologies powerfully improve both carrier transport and LFN property for future CMOS circuits consisting of NW FETs, without any large concern about the interface quality.Dans cette thèse, les propriétés électriques de transistors à nanofils de silicium liées à l'interface oxyde de grille/canal ont été étudiées par le biais de mesures de bruit basse fréquence (bruit 1/f) et de transport dans le canal. Ces transistors nanofils dont les dimensions ont été réduites jusqu'à quelques nanomètres pour la section, représentent une alternative sérieuse pour les futurs nœuds technologiques CMOS. Cependant, la qualité de l'interface oxyde de grille/canal pose question pour transistors dont l'architecture s'étend dans les 3 dimensions, en raison du fort rapport surface/volume inhérent à ces transistors, des différentes orientations cristallographiques de ces interfaces, ou encore des matériaux contraints utilisés pour améliorer les performances électriques. La compréhension des liens entre les propriétés de transport des porteurs dans le canal, qui garantissent en grande partie les performances électriques des transistors, et la qualité de l'interface avec l'oxyde de grille est fond primordiale pour optimiser les transistors nanofils. Les mesures de bruit, associées à l'étude du transport dans le canal, sont un outil puissant et adapté à ces dispositifs tridimensionnels, sans être limité par la taille ultra-réduite des transistors nanofils. Les transistors nanofils étudiés ont été fabriqués à partir de substrats minces SOI, et intègrent un empilement de grille HfSiON/TiN, qui permet de réduire les dimensions tout en conservant les mêmes propriétés électrostatiques. Pour gagner en performances, des contraintes mécaniques ont été introduites dans le canal en silicium : en tension pour les NMOS, par le biais de substrat contraint (sSOI), et en compression pour les PMOS. Un canal en compression uni-axiale peut être obtenu par l'intégration de source/drain en SiGe et/ou par l'utilisation de couches contraintes de type CESL. Des transistors à canal SiGe sur isolant en compression ont également été fabriqués et étudiés. Les caractéristiques électriques des divers transistors nanofils (courbes Id-Vg, compromis Ion-Ioff, mobilité des porteurs) démontrent l'excellent contrôle électrostatique dû à l'architecture 3D, ainsi que l'efficacité de l'ingénierie de contraintes dans les nanofils jusqu'à de faibles longueurs de grilles (~17nm). Des mesures de bruit basse fréquence ont été réalisées sur ces mêmes dispositifs et analysées en fonction des paramètres géométriques de l'architecture nanofils (largeur W, forme de la section, longueur de grille L), et des diverses variantes technologiques. Nous avons démontré que le bruit 1/f dans les transistors nanofils peut être décrit par le modèle de fluctuations du nombre de porteurs (CNF) corrélées aux fluctuations de mobilité (CMF). Le bruit associé aux régions S/D a pu également être intégré dans ce modèle en ajoutant une contribution, en particulier pour les PMOS. Alors que les différentes variantes technologiques ont peu d'effet sur le bruit 1/f, les variations de géométrie en L et W changent la composante de bruit liée aux fluctuations du nombre de porteurs (CNF) de manière inversement proportionnelle à la surface totale (~1/WL). Cette augmentation du bruit est le reflet du transport qui se produit à proximité des interfaces avec l'oxyde. Les différentes orientations des interfaces supérieures et latérales (110) ou (100) présentent la même quantité de pièges d'interface (extrait à partir des mesures de bruit 1/f, en séparant les contributions des différentes faces du nanofil) bien qu'ayant une rugosité différente essentiellement liée au process. En revanche la composante CMF n'est pas altérée par la réduction des dimensions contrairement à la mobilité des porteurs qui décroit fortement avec L. Finalement, les mesures de bruit 1/f ont été comparées aux spécifications ITRS 2013 pour les transistors multi-grilles en vue des futurs nœuds technologiques de la logique CMOS, et démontrent que nos transistors nanofils satisfont les exigences en la matière
ANALYTICAL COMPACT MODELING OF NANOSCALE MULTIPLE-GATE MOSFETS.
L’objectiu principal d’aquest treball és el desenvolupament d’un model compacte per a MOSFETs de múltiple porta d’escala nanomètrica, que sigui analític, basat en la física del dispositiu, i predictiu per a simulacions AC i DC. Els dispositius investigats són el MOSFET estàndar en mode d’inversió, a més d’un nou dispositiu anomenat “junctionless MOSFET” (MOSFET sense unions).
El model es va desenvolupar en una formulació compacta amb l’ajuda de l’equació de Poisson i la tècnica de la transformación conforme de Schwarz-Cristoffel. Es varen obtenir les equacions del voltatge llindar i el pendent subllindar. Usant la funció W de Lambert, a més d’una funció de suavització per a la transcició entre les regions de depleció i acumulació, s’obté un model unificat de la densitat de càrrega, vàlid per a tots els modes d’operació del transistor. S’estudien també les dependències entre els paràmetres físics del dispositiu i el seu impacte en el seu rendiment. Es tenen en compteefectes importants de canal curt i de quantització. Es discuteixen també la simetria al voltant de Vds= 0 V, i la continuïtat del corrent de drenador en les derivades d’ordre superior. El model va ser validat mitjançant simulacions TCAD numèriques i mesures experimentals.El objetivo principal de este trabajo es el desarrollo de un modelo compacto para MOSFETs de múltiple puerta de escala nanométrica, que sea analítico, basado en la física del dispositivo, y predictivo para simulaciones AC y DC. Los dispositivos investigados son el MOSFET estándar en modo inversión, además de un nuevo dispositivo llamado “junctionless MOSFET” (MOSFET sin uniones).
El modelo se desarrolló en una formulación compacta con la ayuda de la ecuación de Poisson y la técnica de transformación conforme de Schwarz-Cristoffel. Se obtuvieron las ecuaciones del voltaje umbral y la pendiente subumbral. Usando la función W de Lambert, además de una función de suavización para la transición entre las regiones de depleción y acumulación, se obtiene un modelo unificado de la densidad de carga, válido para todos los modos de operación del transistor. Se estudian también las dependencias entre los parámetros físicos del dispositivo y su impacto en su rendimiento. Se tienen en cuenta efectos importantes de canal corto y de cuantización. Se discuten también la simetría alrededor de Vds= 0 V, y la continuidad de la corriente de drenador en las derivadas de orden superior. El modelo fue validado mediante simulaciones TCAD numéricas y medidas experimentales.The main focus is on the development of an analytical, physics-based and predictive DC and AC compact model for nanoscale multiple-gate MOSFETs. The investigated devices are the standard inversion mode MOSFET and a new device concept called junctionless MOSFET.
The model is derived in closed-from with the help of Poisson's equation and the conformal mapping technique by Schwarz-Christoffel. Equations for the calculation of the threshold voltage and subthreshold slope are derived. Using Lambert's W-function and a smoothing function for the transition between the depletion and accumulation region, an unified charge density model valid for all operating regimes is developed. Dependencies between the physical device parameters and their impact on the device performance are worked out. Important short-channel and quantization effects are taken into account. Symmetry around Vds = 0 V and continuity of the drain current at derivatives of higher order are discussed. The model is validated versus numerical TCAD simulations and measurement data
Multi-gate Si nanowire MOSFETs:fabrication, strain engineering and transport analysis
Multi-gate devices e.g. gate-all-around (GAA) Si nanowires and FinFETs are promising can- didates for aggressive CMOS downscaling. Optimum subthreshold slope, immunity against short channel effect and optimized power consumption are the major benefits of such archi- tectures due to higher electrostatic control of the channel. On the other hand, Si nanowires show excellent mechanical properties e.g. yield and fracture strengths of 10±2% and 30±1% in comparison to 3.7% and 4.0% for bulk Si, respectively, a strong motivation to be used as exclusive platforms for innovative nanoelectronic applications e.g. novel strain engineering techniques for carrier transport enhancement in multi-gate 3D suspended channels or lo- cal band-gap modulation using > 4 GPa uniaxial tensile stress in suspended Si channels to enhance the band-to-band tunneling current in multi-gate Tunnel-FETs, all without plastic deformation and therefore, no carrier mobility degradation in deeply scaled channels. In this thesis and as a first step, a precise built-in stress analysis during local thermal oxidation of suspended Si NWs in the presence of a Si3N4 tensile hard mask was done. Accumulation of up to 2.6 GPa uniaxial tensile stress in the buckled NWs is reported. The contribution of hard mask/spacer engineering on the stress level and the NW formation was studied and buckled self-aligned dual NW MOSFETs on bulk Si with two sub-100 nm cross-sectional Si cores including ∼0.8 uniaxial tensile stress are reported. Micro-Raman spectroscopy was widely used in this thesis to measure stress in the buckled NWs on both bulk and SOI substrates. A process flow was designed to make dense array of GAA sub-5 nm cross-sectional Si NWs using a SOI substrate including a high level of stress. The NW stress level can be engineered simply using e.g. metal-gate thin film stress suitable for both NMOS and PMOS devices. Lately, highly and heavily doped architectures with a single-type doping profile from source to drain, called junctionless and accumulation-mode devices, are proposed to significantly simplify the fabrication process, address a few technical limitations e.g. ultra-abrupt junctions in order to fabricate shorter channel length devices. Therefore, in this process flow, a highly doped accumulation-mode was targeted as the operation mechanism. Finally, extensive TCAD device simulation was done on GAA Si NW JL MOSFETs to study the corner effects on the device characteristics, from subthreshold to strong accumulation, report the concept of local volume accumulation/depletion, quantum flat-band voltage, significant bias-dependent series resistance in junctionless MOSFETs and finally, support the experimental data to extract precisely the carrier mobility in sub-5 nm Si NW MOSFETs
Theoretical assessment of the influence of mesa size and shape on the two-dimensional electron gas properties of AlGaN/GaN heterojunctions
AlGaN/GaN heterostructure field-effect transistors (HFETs) are strong candidates for high-power and high-frequency applications. Even in the absence of doping, thanks to high polarization fields, often a two-dimensional electron gas (2DEG) of unprecedented concentrations forms at these heterojunctions. Control over this carrier induction process is crucial in achieving normally-off field-effect transistors (i.e., transistors of zero standby power consumption). One way to achieve this is through polarization engineering. Mesa-isolation geometry seemingly offers interesting avenues to reduce the piezoelectric polarization at the heterointerface, and as a result means for polarization engineering.
Using a Poisson-Schrödinger self-consistent solver, the effect of strain on the sheet charge density is investigated in the context of one-, two- and three-dimensional simulations of AlGaN/GaN heterostructures. Properties of the two-dimensional electron gas are detailed and the influences of Aluminum mole fraction, AlGaN barrier thickness, GaN cap layer inclusion are investigated. The carrier confinement in the 2DEG is explored in the case of two-dimensional version of the simulations. Through these studies, the effect of shrinking the size of the mesa on lowering the 2DEG concentration is confirmed.
Through performing three-dimensional simulations, the effects of cross-sectional geometry on the average sheet charge density and the threshold voltage are presented. It is shown that as the perimeter-to-area ratio is increased, the carrier concentration decreases, and the threshold voltage becomes less negative. Via these studies, the degree of effectiveness of geometry as means for polarization engineering is, for the first time, theoretically quantified
Miniaturized Transistors, Volume II
In this book, we aim to address the ever-advancing progress in microelectronic device scaling. Complementary Metal-Oxide-Semiconductor (CMOS) devices continue to endure miniaturization, irrespective of the seeming physical limitations, helped by advancing fabrication techniques. We observe that miniaturization does not always refer to the latest technology node for digital transistors. Rather, by applying novel materials and device geometries, a significant reduction in the size of microelectronic devices for a broad set of applications can be achieved. The achievements made in the scaling of devices for applications beyond digital logic (e.g., high power, optoelectronics, and sensors) are taking the forefront in microelectronic miniaturization. Furthermore, all these achievements are assisted by improvements in the simulation and modeling of the involved materials and device structures. In particular, process and device technology computer-aided design (TCAD) has become indispensable in the design cycle of novel devices and technologies. It is our sincere hope that the results provided in this Special Issue prove useful to scientists and engineers who find themselves at the forefront of this rapidly evolving and broadening field. Now, more than ever, it is essential to look for solutions to find the next disrupting technologies which will allow for transistor miniaturization well beyond silicon’s physical limits and the current state-of-the-art. This requires a broad attack, including studies of novel and innovative designs as well as emerging materials which are becoming more application-specific than ever before