ASCR/HEP Exascale Requirements Review Report

This draft report summarizes and details the findings, results, and recommendations derived from the ASCR/HEP Exascale Requirements Review meeting held in June, 2015. The main conclusions are as follows. 1) Larger, more capable computing and data facilities are needed to support HEP science goals in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of the demand at the 2025 timescale is at least two orders of magnitude -- and in some cases greater -- than that available currently. 2) The growth rate of data produced by simulations is overwhelming the current ability, of both facilities and researchers, to store and analyze it. Additional resources and new techniques for data analysis are urgently needed. 3) Data rates and volumes from HEP experimental facilities are also straining the ability to store and analyze large and complex data volumes. Appropriately configured leadership-class facilities can play a transformational role in enabling scientific discovery from these datasets. 4) A close integration of HPC simulation and data analysis will aid greatly in interpreting results from HEP experiments. Such an integration will minimize data movement and facilitate interdependent workflows. 5) Long-range planning between HEP and ASCR will be required to meet HEP's research needs. To best use ASCR HPC resources the experimental HEP program needs a) an established long-term plan for access to ASCR computational and data resources, b) an ability to map workflows onto HPC resources, c) the ability for ASCR facilities to accommodate workflows run by collaborations that can have thousands of individual members, d) to transition codes to the next-generation HPC platforms that will be available at ASCR facilities, e) to build up and train a workforce capable of developing and using simulations and analysis to support HEP scientific research on next-generation systems.Comment: 77 pages, 13 Figures; draft report, subject to further revisio

Proceedings of the third French-Ukrainian workshop on the instrumentation developments for HEP

The reports collected in these proceedings have been presented in the third French-Ukrainian workshop on the instrumentation developments for high-energy physics held at LAL, Orsay on October 15-16. The workshop was conducted in the scope of the IDEATE International Associated Laboratory (LIA). Joint developments between French and Ukrainian laboratories and universities as well as new proposals have been discussed. The main topics of the papers presented in the Proceedings are developments for accelerator and beam monitoring, detector developments, joint developments for large-scale high-energy and astroparticle physics projects, medical applications.Comment: 3rd French-Ukrainian workshop on the instrumentation developments for High Energy Physics, October 15-16, 2015, LAL, Orsay, France, 94 page

Laser wakefield and direct acceleration in the plasma bubble regime

Laser wakefield acceleration (LWFA) and direct laser acceleration (DLA) are two different kinds of laser plasma electron acceleration mechanisms. LWFA relies on the laser-driven plasma wave to accelerate electrons. The interaction of ultra-short ultra-intensive laser pulses with underdense plasma leads the LWFA into a highly nonlinear regime (“plasma bubble regime”) that attracts particular interest nowadays. DLA accelerates electrons by laser electromagnetic wave in the ion channel or the plasma bubble through the Betatron resonance. This dissertation presents a hybrid laser plasma electron acceleration mechanism. We investigate its features through particle-in-cell (PIC) simulations and the single particle model. The hybrid laser plasma electron acceleration is the merging concept between the LWFA and the DLA, so called laser wakefield and direct acceleration (LWDA). The requirements of the initial conditions of the electron to undergo the LWDA are determined. The electron must have a large initial transverse energy. Two electron injection mechanisms that are suitable for the LWDA, density bump injection and ionization induced injection, are studied in detail. The features of electron beam phase space and electron dynamics are explored. Electron beam phase space appears several unique features such as spatially separated two groups, the correlation between the transverse energy and the relativistic factor and the double-peak spectrum. Electrons are synergistically accelerated by the wakefield as well as by the laser electromagnetic field in the laser-driven plasma bubble. LWDA are also investigated in the moderate power regime (10 TW) in regarding the effects of laser color and polarization. It is found that the frequency upshift laser pulse has better performance on avoiding time-jitter of electron energy spectra, electron final energy and electron charge yield. Some basic characters that related to the LWDA such as the effects of the subluminal laser wave, the effects of the longitudinal accelerating field, the electron beam emittance, the electron charge yield and potentially applications as radiation source are discussed.Physic

High-Performance Simulations of Coherent Synchrotron Radiation on Multicore GPU and CPU Platforms

Coherent synchrotron radiation (CSR) is an effect of self-interaction of an electron bunch as it traverses a curved path. It can cause a significant emittance degradation and microbunching. We present a new high-performance 2D, particle-in-cell code which uses massively parallel multicore GPU/GPU platforms to alleviate computational bottlenecks. The code formulates the CSR problem from first principles by using the retarded scalar and vector potentials to compute the self-interaction fields. The speedup due to the parallel implementation on GPU/CPU platforms exceeds three orders of magnitude, thereby bringing a previously intractable problem within reach. The accuracy of the code is verified against analytic 1D solutions (rigid bunch)

Plasma Dynamics

Contains reports on six research projects.National Science Foundation (Grant ENG79-07047)U.S. Air Force - Office of Scientific Research (Grant AFOSR77-3143D)U.S. Air Force - Office of Scientific Research (Contract AFOSR82-0063)U.S. Department of Energy (Contract DE-ACO2-78-ET-51013)U.S. Department of Energy (Contract DE-AC02-78ET-53073.A002

Acceleration of Solar Wind Ions by Nearby Interplanetary Shocks: Comparison of Monte Carlo Simulations with Ulysses Observations

The most stringent test of theoretical models of the first-order Fermi mechanism at collisionless astrophysical shocks is a comparison of the theoretical predictions with observational data on particle populations. Such comparisons have yielded good agreement between observations at the quasi-parallel portion of the Earth's bow shock and three theoretical approaches, including Monte Carlo kinetic simulations. This paper extends such model testing to the realm of oblique interplanetary shocks: here observations of proton and alpha particle distributions made by the SWICS ion mass spectrometer on Ulysses at nearby interplanetary shocks are compared with test particle Monte Carlo simulation predictions of accelerated populations. The plasma parameters used in the simulation are obtained from measurements of solar wind particles and the magnetic field upstream of individual shocks. Good agreement between downstream spectral measurements and the simulation predictions are obtained for two shocks by allowing the the ratio of the mean-free scattering length to the ionic gyroradius, to vary in an optimization of the fit to the data. Generally small values of this ratio are obtained, corresponding to the case of strong scattering. The acceleration process appears to be roughly independent of the mass or charge of the species.Comment: 26 pages, 6 figures, AASTeX format, to appear in the Astrophysical Journal, February 20, 199

Modeling of Novel Plasma-Optical Systems

This is the review of the current status an ongoing theoretical, simulations and some experimental researches of the novel plasma dynamical devices based on the axial-symmetric cylindrical electrostatic plasma lens (PL) configuration and the fundamental plasma-optical principles of magnetic electron isolation and equipotentialization magnetic field lines. The crossed electric and magnetic fields plasma lens configuration provides us with the attractive and suitable method for establishing stable plasma discharge at low-pressure. Using plasma lens configuration in this way some novel cost-effective, low-maintenance, high-reliability plasma devices using permanent magnets were developed. In part, it was proposed and created device for ion treatment and deposition of exotic coatings, device for filtering dense plasma flow from micro-droplets, electrostatic plasma lens for focusing and manipulating wide aperture, high-current, low-energy, heavy metal ion plasma flow, and the effective lens was first proposed for manipulating high-current beams of negatively charged particles (negative ions and electrons). Here we mainly describe models and results of theoretical consideration and simulation of the novel generation cylindrical plasma devices

Perspectives of Nuclear Physics in Europe: NuPECC Long Range Plan 2010

The goal of this European Science Foundation Forward Look into the future of Nuclear Physics is to bring together the entire Nuclear Physics community in Europe to formulate a coherent plan of the best way to develop the field in the coming decade and beyond.<p></p> The primary aim of Nuclear Physics is to understand the origin, evolution, structure and phases of strongly interacting matter, which constitutes nearly 100% of the visible matter in the universe. This is an immensely important and challenging task that requires the concerted effort of scientists working in both theory and experiment, funding agencies, politicians and the public.<p></p> Nuclear Physics projects are often “big science”, which implies large investments and long lead times. They need careful forward planning and strong support from policy makers. This Forward Look provides an excellent tool to achieve this. It represents the outcome of detailed scrutiny by Europe’s leading experts and will help focus the views of the scientific community on the most promising directions in the field and create the basis for funding agencies to provide adequate support.<p></p> The current NuPECC Long Range Plan 2010 “Perspectives of Nuclear Physics in Europe” resulted from consultation with close to 6 000 scientists and engineers over a period of approximately one year. Its detailed recommendations are presented on the following pages. For the interested public, a short summary brochure has been produced to accompany the Forward Look.<p></p&gt

The International Linear Collider

In this article, we describe the key features of the recently completed technical design for the International Linear Collider (ILC), a 200-500 GeV linear electron-positron collider (expandable to 1 TeV) that is based on 1.3 GHz superconducting radio-frequency (SCRF) technology. The machine parameters and detector characteristics have been chosen to complement the Large Hadron Collider physics, including the discovery of the Higgs boson, and to further exploit this new particle physics energy frontier with a precision instrument. The linear collider design is the result of nearly twenty years of R&D, resulting in a mature conceptual design for the ILC project that reflects an international consensus. We summarize the physics goals and capability of the ILC, the enabling R&D and resulting accelerator design, as well as the concepts for two complementary detectors. The ILC is technically ready to be proposed and built as a next generation lepton collider, perhaps to be built in stages beginning as a Higgs factory.Comment: 41 page

A novel haptic model and environment for maxillofacial surgical operation planning and manipulation

This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone