4 research outputs found

    Design, Characterization And Compact Modeling Of Novel Silicon Controlled Rectifier (scr)-based Devices For Electrostatic Discha

    Get PDF
    Electrostatic Discharge (ESD), an event of a sudden transfer of electrons between two bodies at different potentials, happens commonly throughout nature. When such even occurs on integrated circuits (ICs), ICs will be damaged and failures result. As the evolution of semiconductor technologies, increasing usage of automated equipments and the emerging of more and more complex circuit applications, ICs are more sensitive to ESD strikes. Main ESD events occurring in semiconductor industry have been standardized as human body model (HBM), machine model (MM), charged device model (CDM) and international electrotechnical commission model (IEC) for control, monitor and test. In additional to the environmental control of ESD events during manufacturing, shipping and assembly, incorporating on-chip ESD protection circuits inside ICs is another effective solution to reduce the ESD-induced damage. This dissertation presents design, characterization, integration and compact modeling of novel silicon controlled rectifier (SCR)-based devices for on-chip ESD protection. The SCR-based device with a snapback characteristic has long been used to form a VSS-based protection scheme for on-chip ESD protection over a broad rang of technologies because of its low on-resistance, high failure current and the best area efficiency. The ESD design window of the snapback device is defined by the maximum power supply voltage as the low edge and the minimum internal circuitry breakdown voltage as the high edge. The downscaling of semiconductor technology keeps on squeezing the design window of on-chip ESD protection. For the submicron process and below, the turn-on voltage and sustain voltage of ESD protection cell should be lower than 10 V and higher than 5 V, respectively, to avoid core circuit damages and latch-up issue. This presents a big challenge to device/circuit engineers. Meanwhile, the high voltage technologies push the design window to another tough range whose sustain voltage, 45 V for instance, is hard for most snapback ESD devices to reach. Based on the in-depth elaborating on the principle of SCR-based devices, this dissertation first presents a novel unassisted, low trigger- and high holding-voltage SCR (uSCR) which can fit into the aforesaid ESD design window without involving any extra assistant circuitry to realize an area-efficient on-chip ESD protection for low voltage applications. The on-chip integration case is studied to verify the protection effectiveness of the design. Subsequently, this dissertation illustrate the development of a new high holding current SCR (HHC-SCR) device for high voltage ESD protection with increasing the sustain current, not the sustain voltage, of the SCR device to the latchup-immune level to avoid sacrificing the ESD protection robustness of the device. The ESD protection cells have been designed either by using technology computer aided design (TCAD) tools or through trial-and-error iterations, which is cost- or time-consuming or both. Also, the interaction of ESD protection cells and core circuits need to be identified and minimized at pre-silicon stage. It is highly desired to design and evaluate the ESD protection cell using simulation program with integrated circuit emphasis (SPICE)-like circuit simulation by employing compact models in circuit simulators. And the compact model also need to predict the response of ESD protection cells to very fast transient ESD events such as CDM event since it is a major ESD failure mode. The compact model for SCR-based device is not widely available. This dissertation develops a macromodeling approach to build a comprehensive SCR compact model for CDM ESD simulation of complete I/O circuit. This modeling approach offers simplicity, wide availability and compatibility with most commercial simulators by taking advantage of using the advanced BJT model, Vertical Bipolar Inter-Company (VBIC) model. SPICE Gummel-Poon (SGP) model has served the ICs industry well for over 20 years while it is not sufficiently accurate when using SGP model to build a compact model for ESD protection SCR. This dissertation seeks to compare the difference of SCR compact model built by using VBIC and conventional SGP in order to point out the important features of VBIC model for building an accurate and easy-CAD implement SCR model and explain why from device physics and model theory perspectives

    Design of Low-Capacitance Electrostatic Discharge (ESD) Protection Devices in Advanced Silicon Technologies.

    Get PDF
    Electrostatic discharge (ESD) related failure is a major IC reliability concern and this is particularly true as technology continues shrink to nano-metric dimensions. ESD design window research shows that ESD robustness of victim devices keep decreasing from 350nm bulk technology to 7nm FinFET technologies. In the meantime, parasitic capacitance of ESD diode with same It2 in FinFET technologies is approximately 3X compared with that in planar technologies. Thus transition from planar to FinFET technology requires more robust ESD protection however the large parasitic capacitance of ESD protection cell is problematic in high-speed interface design. To reduce the parasitic capacitance, a dual diode silicon controlled rectifier (DD-SCR) is presented in this dissertation. This design can exhibit good trade-offs between ESD robustness and parasitic capacitance characteristics. Besides, different bounding materials lead to performance variations in DD-SCRs are compared. Radio frequency (RF) technology is also demanded low capacitance ESD protection. To address this concern, a ?-network is presented, providing robust ESD protection for 10-60 GHz RF circuit. Like a low pass ? filter, the network can reflect high frequency RF signals and transmit low frequency ESD pulses. Given proper inductor value, networks can work as robust ESD solutions at a certain Giga Hertz frequency range, making this design suitable for broad band protection in RF input/outputs (I/Os). To increase the holding voltage and reduce snapback, a resistor assist triggering heterogeneous stacking structure is presented in this dissertation, which can increase the holding voltage and also keep the trigger voltage nearly as same as a single SCR device

    Modeling and simulation of full-component integrated circuits in transient ESD events

    Get PDF
    This thesis presents a methodology to model and simulate transient electrostatic discharge (ESD) responses of integrated circuits (IC). To obtain valid simulation results, the IC component must be represented by a circuit netlist composed of device models that are valid under the ESD conditions. Models of the nonlinear devices that make up the ESD protection network of the IC must have transient I-V responses calibrated against measurements that emulate ESD events. Interconnects, power distribution networks, and the silicon substrate on the chip die as well as on the IC package must be faithfully constructed to emulate the fact that ESD current flows in a distributed manner across the entire IC component. The resultant equivalent circuit model therefore contains a huge number of nodes and devices, and the simulation runtime may be prohibitively long. Techniques must be devised to make the numerical simulation process more efficient without sacrifice of accuracy. These techniques include reasonable abstraction of the distributed full-component circuit netlist, dynamic piecewise-linear device models, and customized efficient transient circuit simulator. With the simulation streamlining techniques set up properly, comprehensive and predictive transient ESD simulation can be carried out efficiently to investigate the weakest link in the target IC, and the design can be fine-tuned to achieve optimal performance in both functionality and ESD reliability

    Simulation and experimental comparison of GGNMOS and LVTSCR protection cells under ElectroStatic Discharges

    No full text
    International audienceTo assess the capabilities of the device simulation tool in the field of ElectroStatic Discharges (ESD), two protection structures were studied: a Grounded Gate NMOS transistor (GGNMOS) and a Low Voltage Threshold Silicon Controlled Rectifier (LVTSCR). Both compounds were tested with the Transmission Line Pulse test method and simulated with the software Dessis-ISE. Hence, checking the behaviour of each device in terms of ESD has been possible. (C) 2001 Elsevier Science Ltd. All rights reserved
    corecore