15,681 research outputs found
A methodological approach to BISDN signalling performance
Sophisticated signalling protocols are required to properly handle the complex multimedia, multiparty services supported by the forthcoming BISDN. The implementation feasibility of these protocols should be evaluated during their design phase, so that possible performance bottlenecks are identified and removed. In this paper we present a methodology for evaluating the performance of BISDN signalling systems under design. New performance parameters are introduced and their network-dependent values are extracted through a message flow model which has the capability to describe the impact of call and bearer control separation on the signalling performance. Signalling protocols are modelled through a modular decomposition of the seven OSI layers including the service user to three submodels. The workload model is user descriptive in the sense that it does not approximate the direct input traffic required for evaluating the performance of a layer protocol; instead, through a multi-level approach, it describes the actual implications of user signalling activity for the general signalling traffic. The signalling protocol model is derived from the global functional model of the signalling protocols and information flows using a network of queues incorporating synchronization and dependency functions. The same queueing approach is followed for the signalling transfer network which is used to define processing speed and signalling bandwidth requirements and to identify possible performance bottlenecks stemming from the realization of the related protocols
Recommended from our members
Survey of traffic control schemes and error control schemes for ATM networks
Among the techniques proposed for B-ISDN transfer mode, ATM concept is considered to be the most promising transfer technique because of its flexibility and efficiency. This paper surveys and reviews a number of topics related to ATM networks. Those topics cover congestion control, provision of multiple classes of traffic, and error control. Due to the nature of ATM networks, those issues are far more challenging than in conventional networks. Sorne of the more promising solutions to those issues are surveyed, and the corresponding results on performance are summarized. Future research problems in ATM protocol aspect are also presented
Matrix-geometric solution of infinite stochastic Petri nets
We characterize a class of stochastic Petri nets that can be solved using matrix geometric techniques. Advantages of such on approach are that very efficient mathematical technique become available for practical usage, as well as that the problem of large state spaces can be circumvented. We first characterize the class of stochastic Petri nets of interest by formally defining a number of constraints that have to be fulfilled. We then discuss the matrix geometric solution technique that can be employed and present some boundary conditions on tool support. We illustrate the practical usage of the class of stochastic Petri nets with two examples: a queueing system with delayed service and a model of connection management in ATM network
Performance of Bursty World Wide Web (WWW) Sources over ABR
We model World Wide Web (WWW) servers and clients running over an ATM network
using the ABR (available bit rate) service. The WWW servers are modeled using a
variant of the SPECweb96 benchmark, while the WWW clients are based on a model
by Mah. The traffic generated by this application is typically bursty, i.e., it
has active and idle periods in transmission. A timeout occurs after given
amount of idle period. During idle period the underlying TCP congestion windows
remain open until a timeout expires. These open windows may be used to send
data in a burst when the application becomes active again. This raises the
possibility of large switch queues if the source rates are not controlled by
ABR. We study this problem and show that ABR scales well with a large number of
bursty TCP sources in the system.Comment: Submitted to WebNet `97, Toronto, November 9
Recommended from our members
Survey of switching techniques in high-speed networks and their performance
One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (Asynchronous Transfer Mode). ATM can be characterized by very high speed transmission links and simple, hard wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks.A number of designs has been proposed for implementing ATM switches. While many differences exist among the proposals, the vast majority of them is based on self-routing multi-stage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routing capability and suitability for VLSI implementation.Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques has also been proposed to improve the performance of blocking and nonblocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues
An acceleration simulation method for power law priority traffic
A method for accelerated simulation for simulated self-similar processes is proposed. This technique simplifies
the simulation model and improves the efficiency by using excess packets instead of packet-by-packet source traffic for a FIFO and non-FIFO buffer scheduler. In this research is focusing on developing an equivalent model of the conventional packet buffer that can produce an output analysis (which in this case will be the steady state probability) much faster. This acceleration simulation method is a further development of the Traffic Aggregation technique, which had previously been applied to FIFO buffers only and applies the Generalized Ballot Theorem to calculate the waiting time for the low priority traffic (combined with prior work on traffic aggregation). This hybrid method is shown to provide a significant reduction in the process time, while maintaining queuing behavior in the buffer that is highly accurate when compared to results from a conventional simulatio
- âŠ