The IPS fidelity scale as a guideline to implement Supported Employment

info:eu-repo/semantics/publishe

Placement-Driven Technology Mapping for LUT-Based FPGAs

In this paper, we study the problem of placement-driven technology mapping for table-lookup based FPGA architectures to optimize circuit performance. Early work on technology mapping for FPGAs such as Chortle-d[14] and Flowmap[3] aim to optimize the depth of the mapped solution without consideration of interconnect delay. Later works such as Flowmap-d[7], Bias-Clus[4] and EdgeMap consider interconnect delays during mapping, but do not take into consideration the effects of their mapping solution on the final placement. Our work focuses on the interaction between the mapping and placement stages. First, the interconnect delay information is estimated from the placement, and used during the labeling process. A placement-based mapping solution which considers both global cell congestion and local cell congestion is then developed. Finally, a legalization step and detailed placement is performed to realize the design. We have implemented our algorithm in a LUT based FPGA technology mapping package named PDM (Placement-Driven Mapping) and tested the implementation on a set of MCNC benchmarks. We use the tool VPR[1][2] for placement and routing of the mapped netlist. Experimental results show the longest path delay on a set of large MCNC benchmarks decreased by 12.3 % on the average

Placement and routing for reconfigurable systems.

Applications using reconfigurable logic have been widely demonstrated to offer better performance over software-based solutions. However, good performance rating is often destroyed by poor reconfiguration latency - time required to reconfigure hardware to perform the new task. Recent research focus on design automation techniques to address reconfiguration latency bottleneck. The contribution to novelty of this thesis is in new placement and routing techniques resulting in minimising reconfiguration latency of reconfigurable systems. This presents a part of design process concerned with positioning and connecting design blocks in a logic gate array. The aim of the research is to optimise the placement and interconnect strategy such that dynamic changes in system functionality can be achieved with minimum delay. A review of previous work in the field is given and the relevant theoretical framework developed. The dynamic reconfiguration problem is analysed for various reconfigurable technologies. Several algorithms are developed and evaluated using a representative set of problem domains to assess their effectiveness. Results obtained with novel placement and routing techniques demonstrate configuration data size reduction leading to significant reconfiguration latency improvements

A Parallel Hardware Architecture For Quantum Annealing Algorithm Acceleration

Quantum Annealing (QA) is an emerging technique, derived from Simulated Annealing, providing metaheuristics for multivariable optimisation problems. Studies have shown that it can be applied to solve NP-hard problems with faster convergence and better quality of result than other traditional heuristics, with potential applications in a variety of fields, from transport logistics to circuit synthesis and optimisation. In this paper, we present a hardware architecture implementing a QA-based solver for the Multidimensional Knapsack Problem, designed to improve the performance of the algorithm by exploiting parallelised computation. We synthesised the architecture using as a target an Altera FPGA board and simulated the execution for solving a set of benchmarks available in the literature. Simulation results show that the proposed implementation is about 100 times faster than a single-thread general-purpose CPU without impact on the accuracy of the solution

HARFLOW3D: A Latency-Oriented 3D-CNN Accelerator Toolflow for HAR on FPGA Devices

For Human Action Recognition tasks (HAR), 3D Convolutional Neural Networks have proven to be highly effective, achieving state-of-the-art results. This study introduces a novel streaming architecture based toolflow for mapping such models onto FPGAs considering the model's inherent characteristics and the features of the targeted FPGA device. The HARFLOW3D toolflow takes as input a 3D CNN in ONNX format and a description of the FPGA characteristics, generating a design that minimizes the latency of the computation. The toolflow is comprised of a number of parts, including i) a 3D CNN parser, ii) a performance and resource model, iii) a scheduling algorithm for executing 3D models on the generated hardware, iv) a resource-aware optimization engine tailored for 3D models, v) an automated mapping to synthesizable code for FPGAs. The ability of the toolflow to support a broad range of models and devices is shown through a number of experiments on various 3D CNN and FPGA system pairs. Furthermore, the toolflow has produced high-performing results for 3D CNN models that have not been mapped to FPGAs before, demonstrating the potential of FPGA-based systems in this space. Overall, HARFLOW3D has demonstrated its ability to deliver competitive latency compared to a range of state-of-the-art hand-tuned approaches being able to achieve up to 5$\times$ better performance compared to some of the existing works.Comment: 11 pages, 8 figures, 6 table