Second-order SM approach to SISO time-delay system output tracking

A fully linearizable single-input-single-output relative-degree n system with an output time delay is considered in this paper. Using the approach of Pade approximation, system center approach, and second-order sliding-mode (SM) control, we have obtained good output tracking results. The Smith predictor is used to compensate the difference between the actual delayed output and its approximation. A second-order supertwisting SM observer observes the disturbance in the plant. A nonlinear example is studied to show the effect of this methodology

Switching frequency regulation in sliding mode control by a hysteresis band controller

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksFixing the switching frequency is a key issue in sliding mode control implementations. This paper presents a hysteresis band controller capable of setting a constant value for the steady-state switching frequency of a sliding mode controller in regulation and tracking tasks. The proposed architecture relies on a piecewise linear modeling of the switching function behavior within the hysteresis band, and consists of a discrete-time integral-type controller that modifies the amplitude of the hysteresis band of the comparator in accordance with the error between the desired and the actually measured switching period. For tracking purposes, an additional feedforward action is introduced to compensate the time variation of the switching function derivatives at either sides of the switching hyperplane in the steady state. Stability proofs are provided, and a design criterion for the control parameters to guarantee closed-loop stability is subsequently derived. Numerical simulations and experimental results validate the proposal.Accepted versio

Wind turbines controllers design based on the super-twisting algorithm

The continuous increase in the size of wind turbines (WTs) has led to new challenges in the design of novel torque and pitch controllers. Today’s WT control design must fulfill numerous specifications to assure effective electrical energy production and to hold the tower vibrations inside acceptable levels of operation. Hence, this paper presents modern torque and pitch control developments based on the super-twisting algorithm (STA) by using feedback of the fore- aft and side-to-side acceleration signals of the WT tower. According to numerical experiments realized using FAST, these controllers mitigate vibrations in the tower without affecting the quality of electrical power production. Moreover, the proposed controllers’ performance is better than the baseline controllers used for comparison.Postprint (author's final draft

Hybrid fuzzy sliding mode control for motorised space tether spin-up when coupled with axial and torsional oscillation

A specialised hybrid controller is applied to the control of a motorised space tether spin-up space coupled with an axial and a torsional oscillation phenomenon. A seven-degree-of-freedom (7-DOF) dynamic model of a motorised momentum exchange tether is used as the basis for interplanetary payload exchange in the context of control. The tether comprises a symmetrical double payload configuration, with an outrigger counter inertia and massive central facility. It is shown that including axial and torsional elasticity permits an enhanced level of performance prediction accuracy and a useful departure from the usual rigid body representations, particularly for accurate payload positioning at strategic points. A simulation with given initial condition data has been devised in a connecting programme between control code written in MATLAB and dynamics simulation code constructed within MATHEMATICA. It is shown that there is an enhanced level of spin-up control for the 7-DOF motorised momentum exchange tether system using the specialised hybrid controller. hybrid controller

Fault tolerant control design of floating offshore wind turbines

This work is concerned with active vibration mitigation in wind turbines (WT) but not through the use of specifically tailored devices. Instead, a general control scheme is designed for torque and pitch controllers based on a super-twisting algorithm, which uses additional feedback of the fore-aft and side-to-side acceleration signals at the top of the WT tower to mitigate the vibrational behavior. In general, proposed methods to improve damping through pitch and torque control suffer from increased blade pitch actuator usage. However, in this work the blade pitch angle is smoothed leading to a decrease of the pitch actuator effort, among other benefits evidenced through numerical experiments. The most frequent faults induce vibrations in the corresponding WT subsystems. In fact, vibration monitoring has been recently used for fault diagnosis Thus, by means of vibration mitigation, different faulty conditions can be alleviated leading to a passive fault tolerant control. In this work, coupled non-linear aero-hydro- servo-elastic simulations of a floating offshore wind turbine are carried out for one of the most common pitch actuator faults.Postprint (published version

Design, analysis, and control of a cable-driven parallel platform with a pneumatic muscle active support

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The neck is an important part of the body that connects the head to the torso, supporting the weight and generating the movement of the head. In this paper, a cable-driven parallel platform with a pneumatic muscle active support (CPPPMS) is presented for imitating human necks, where cable actuators imitate neck muscles and a pneumatic muscle actuator imitates spinal muscles, respectively. Analyzing the stiffness of the mechanism is carried out based on screw theory, and this mechanism is optimized according to the stiffness characteristics. While taking the dynamics of the pneumatic muscle active support into consideration as well as the cable dynamics and the dynamics of the Up-platform, a dynamic modeling approach to the CPPPMS is established. In order to overcome the flexibility and uncertainties amid the dynamic model, a sliding mode controller is investigated for trajectory tracking, and the stability of the control system is verified by a Lyapunov function. Moreover, a PD controller is proposed for a comparative study. The results of the simulation indicate that the sliding mode controller is more effective than the PD controller for the CPPPMS, and the CPPPMS provides feasible performances for operations under the sliding mode control