An Error Rate Comparison of Power Domain Non-orthogonal Multiple Access and Sparse Code Multiple Access

Non-orthogonal Multiple Access (NOMA) has been envisioned as one of the key enabling techniques to fulfill the requirements of future wireless networks. The primary benefit of NOMA is higher spectrum efficiency compared to Orthogonal Multiple Access (OMA). This paper presents an error rate comparison of two distinct NOMA schemes, i.e., power domain NOMA (PD-NOMA) and Sparse Code Multiple Access (SCMA). In a typical PD-NOMA system, successive interference cancellation (SIC) is utilized at the receiver, which however may lead to error propagation. In comparison, message passing decoding is employed in SCMA. To attain the best error rate performance of PD-NOMA, we optimize the power allocation with the aid of pairwise error probability and then carry out the decoding using generalized sphere decoder (GSD). Our extensive simulation results show that SCMA system with “5×10” setting (i.e., ten users communicate over five subcarriers, each active over two subcarriers) achieves better uncoded BER and coded BER performance than both typical “1×2” and “2×4” PD-NOMA systems in uplink Rayleigh fading channel. Finally, the impacts of channel estimation error on SCMA , SIC and GSD based PD-NOMA and the complexity of multiuser detection schemes are also discussed

Learning-based communication system design – autoencoder for (differential) block coded modulation designs and path loss predictions

Shannon’s channel coding theorem states the existence of long random codes that can make the error probability arbitrarily small. Recently, advanced error-correcting codes such as turbo and low-density parity-check codes have almost reached the theoretical Shannon limit for binary additive white Gaussian noise channels. However, designing optimal high-rate short-block codes with automatic bit-labeling for various wireless networks is still an unsolved problem. Deep-learning-based autoencoders (AE) have appeared as a potential near-optimal solution for designing wireless communications systems. We take a holistic approach that jointly optimizes all the components of the communication networks by performing data-driven end-to-end learning of the neural network-based transmitter and receiver together. Specifically, to tackle the fading channels, we show that AE frameworks can perform near-optimal block coded-modulation (BCM) and differential BCM (d-BCM) designs in the presence and absence of the channel state information knowledge. Moreover, we focus on AE-based designing of high-rate short block codes with automatic bit-labeling that are capable of outperforming conventional networks with larger margins as the rate R increases. We also investigate the BCM and d-BCM from an information-theoretic perspective. With the advent of internet-of-things (IoT) networks and the widespread use of small devices, we face the challenge of limited available bandwidth. Therefore, novel techniques need to be utilized, such as full-duplex (FD) mode transmission reception at the base station for the full utilization of the spectrum, and non-orthogonal multiple access (NOMA) at the user-end for serving multiple IoT devices while fulfilling their quality-of-service requirement. Furthermore, the deployment of relay nodes will play a pivotal role in improving network coverage, reliability, and spectral efficiency for the future 5G networks. Thus, we design and develop novel end-to-end-learning-based AE frameworks for BCM and d-BCM in various scenarios such as amplify-and-forward and decode-and-forward relaying networks, FD relaying networks, and multi-user downlink networks. We focus on interpretability and understand the AE-based BCM and d-BCM from an information-theoretic perspective, such as the AE’s estimated mutual information, convergence, loss optimization, and training principles. We also determine the distinct properties of AE-based (differential) coded-modulation designs in higher-dimensional space. Moreover, we also studied the reproducibility of the trained AE framework. In contrast, large bandwidth and worldwide spectrum availability at mm-wave bands have also shown a great potential for 5G and beyond, but the high path loss (PL) and significant scattering/absorption loss make the signal propagation challenging. Highly accurate PL prediction is fundamental for mm-wave network planning and optimization, whereas existing methods such as slope-intercept models and ray tracing fall short in capturing the large street-by-street variation seen in urban cities. We also exploited the potential benefits of AE framework-based compression capabilities in mm-wave PL prediction. Specifically, we employ extensive 28 GHz measurements from Manhattan Street canyons and model the street clutters via a LiDAR point cloud dataset and 3D-buildings by a mesh-grid building dataset. We aggressively compress 3D-building shape information using convolutional-AE frameworks to reduce overfitting and propose a machine learning (ML)-based PL prediction model for mm-wave propagation.EPSRC-UKRI fundin

Réduction d'interférence dans les systèmes de transmission sans fil

Wireless communications have known an exponential growth and a fast progress over the past few decades. Nowadays, wireless mobile communications have evolved over time starting with the first generation primarily developed for voice communications, and reaching the fourth generation referred to as long term evolution (LTE) that offers an increasing capacity and speed using a different radio interface together with core network improvements. Overall throughput and transmission reliability are among the essential measures of service quality in a wireless system. Such measures are mainly subjected to interference management constraint in a multi-user network. The interference management is at the heart of wireless regulation and is essential for maintaining a desirable throughput while avoiding the detrimental impact of interference at the undesired receivers. Our work is incorporated within the framework of interference network where each user is equipped with single or multiple antennas. The goal is to resolve the challenges that the communications face taking into account the achievable rate and the complexity cost. We propose several solutions for the precoding and decoding designs when transmitters have limited cooperation based on a technique called Interference Alignment. We also address the detection scheme in the absence of any precoding design and we introduce a low complexity detection scheme based on the sparse decomposition.Les communications mobiles sans fil ont connu un formidable essor au cours des dernières décennies. Tout a commencé avec les services vocaux offerts par les systèmes de la première génération en 1980, jusqu¿aux systèmes de la quatrième génération aujourd¿hui avec des services internet haut débit et un accroissement du nombre d¿utilisateurs. En effet, les caractéristiques essentielles qui définissent les services et la qualité de ces services dans les systèmes de communication sans fil sont: le débit, la fiabilité de transmission et le nombre d¿utilisateurs. Ces caractéristiques sont fortement liées entre elles et sont dépendantes de la gestion des interférences entre les différents utilisateurs. Les interférences entre-utilisateurs se produisent lorsque plusieurs émetteurs, dans une même zone, transmettent simultanément en utilisant la même bande de fréquence. Dans cette thèse, nous nous intéressons à la gestion d¿interférence entre utilisateurs par le biais de l¿approche d¿alignement d¿interférences où la coopération entre utilisateurs est réduite. Aussi, nous nous sommes intéressés au design d¿un récepteur où l¿alignement d¿interférences n¿est pas utilisé et où la gestion des interférences est réalisée par des techniques de décodage basées sur les décompositions parcimonieuses des signaux de communications. Ces approches ont conduit à des méthodes performantes et peu couteuses, exploitables dans les liens montant ou descendant

Journal of Telecommunications and Information Technology

kwartalni