Jitter requirements of the sampling clock in software radio receivers

The effective number of bits of an analog-to-digital converter (ADC) is not only limited by the quantization step inaccuracy but also by sampling time uncertainty. According to a commonly used model, the error caused by timing jitter, integrated over the whole bandwidth, should not be bigger than the quantization noise, for a full swing input signals at the maximum input frequency. This results in unfeasible phase noise requirements for the sampling clock in software radio receivers with direct RF sampling. However, for a radio receiver not the total integrated error is relevant, but only the error signal in the channel bandwidth. This paper explores the clock jitter requirements for a software radio application, using a more realistic model and taking into account the power spectrum of both the input signal and the spectrum of the sampling clock jitter. Using this model, we show that the clock jitter requirements are very similar to reciprocal mixing requirements of superheterodyne receivers

Energy efficiency of mmWave massive MIMO precoding with low-resolution DACs

With the congestion of the sub-6 GHz spectrum, the interest in massive multiple-input multiple-output (MIMO) systems operating on millimeter wave spectrum grows. In order to reduce the power consumption of such massive MIMO systems, hybrid analog/digital transceivers and application of low-resolution digital-to-analog/analog-to-digital converters have been recently proposed. In this work, we investigate the energy efficiency of quantized hybrid transmitters equipped with a fully/partially-connected phase-shifting network composed of active/passive phase-shifters and compare it to that of quantized digital precoders. We introduce a quantized single-user MIMO system model based on an additive quantization noise approximation considering realistic power consumption and loss models to evaluate the spectral and energy efficiencies of the transmit precoding methods. Simulation results show that partially-connected hybrid precoders can be more energy-efficient compared to digital precoders, while fully-connected hybrid precoders exhibit poor energy efficiency in general. Also, the topology of phase-shifting components offers an energy-spectral efficiency trade-off: active phase-shifters provide higher data rates, while passive phase-shifters maintain better energy efficiency.Comment: Published in IEEE Journal of Selected Topics in Signal Processin

Metodologia Per la Caratterizzazione di amplificatori a basso rumore per UMTS

In questo lavoro si presenta una metodologia di progettazione elettronica a livello di sistema, affrontando il problema della caratterizzazione dello spazio di progetto dell' amplificatore a basso rumore costituente il primo stadio di un front end a conversione diretta per UMTS realizzato in tecnologia CMOS con lunghezza di canale .18u. La metodologia è sviluppata al fine di valutare in modo quantititativo le specifiche ottime di sistema per il front-end stesso e si basa sul concetto di Piattaforma Analogica, che prevede la costruzione di un modello di prestazioni per il blocco analogico basato su campionamento statistico di indici di prestazioni del blocco stesso, misurati tramite simulazione di dimensionamenti dei componenti attivi e passivi soddisfacenti un set di equazioni specifico della topologia circuitale. Gli indici di prestazioni vengono successivamente ulizzati per parametrizzare modelli comportamentali utilizzati nelle fasi di ottimizzazione a livello di sistema. Modelli comportamentali atti a rappresentare i sistemi RF sono stati pertanto studiati per ottimizzare la scelta delle metriche di prestazioni. L'ottimizzazione dei set di equazioni atti a selezionare le configurazione di interesse per il campionamento ha al tempo stesso richiesto l'approfondimento dei modelli di dispositivi attivi validi in tutte le regioni di funzionamento, e lo studio dettagliato della progettazione degli amplificatori a basso rumore basati su degenerazione induttiva. Inoltre, il problema della modellizzazione a livello di sistema degli effetti della comunicazione tra LNA e Mixer è stato affrontato proponendo e analizzando diverse soluzioni. Il lavoro ha permesso di condurre un'ottimizzazione del front-end UMTS, giungendo a specifiche ottime a livello di sistema per l'amplificatore stesso

Direct Digital Synthesis: A Flexible Architecture for Advanced Signals Research for Future Satellite Navigation Payloads

In legacy Global Positioning System (GPS) Satellite Navigation (SatNav) payloads, the architecture does not provide the flexibility to adapt to changing circumstances and environments. GPS SatNav payloads have largely remained unchanged since the system became fully operational in April 1995. Since then, the use of GPS has become ubiquitous in our day-to-day lives. GPS availability is now a basic assumption for distributed infrastructure; it has become inextricably tied to our national power grids, cellular networks, and global financial systems. Emerging advancements of easy to use radio technologies, such as software-defined radios (SDRs), have greatly lowered the difficulty of discovery and exploitation of vulnerabilities to these systems. The promise of a Direct Digital Synthesis (DDS) architecture provides the flexibility of incorporating countermeasures to emerging threats while maintaining backward capability with existing GPS signals. The objective of the proposed research is to determine if DDS architecture is a viable replacement for legacy GPS SatNav payloads. The overall performance of several architectures is analyzed and evaluated. The architecture with the best performance is chosen and implemented onto a programmable logic device, and GPS signals are generated. The advantages and disadvantages of using the DDS model are discussed and an end-to-end numerical and mathematical models are developed. The end-to-end mathematical model analyzes the quantization effects of the DDS architecture, and it predicts the location and power levels of the desired signal and spurious content present in the spectrum. The spurious content may potentially cause intermodulation distortion to the desired signal. The appropriate DDS architecture and resources are selected by the information gained from the mathematical model