Optimal Relay Selection using jellyfish Optimization Algorithm for Image Transmission over Multiuser Cooperative Communication Networks

A recent study and research have shown that the relay selection schemes for cooperative communication can achieve full cooperative diversity gains and still maintains energy efficiency. Multi-source and multi-relay networks frequently cooperate to transfer their own data to the destination, mainly the access point, in cooperative wireless networks. In this paper, we use a jellyfish optimizer to select the number of relays to transmit packets of the image depending on the order of the data in the image according to its importance and at a constant rate. First, the relationships between the number of relays, peak signal-to-noise ratio, and signal-to-noise ratio are analyzed. Second, the comparison between the performances of Equal Diversity (ED) and Unequal Diversity (UED) with Equal Error Protection(EEP) and Unequal Error Protection(UEP) is introduced using the set partitioning in hierarchical trees (SPIHT) image coder as a source coding. The jellyfish algorithm, as an efficient optimization technique, is applied for solving the problem of optimal relay selection method to reduce the bit error rate and to improve the transmitted image quality. Many useful and important results in the proposed work can be used in the enhancement of image transmission over cooperative networks. Relative to the traditional methods, the proposed method achieves better results for the transmission of images with high quality through cooperative communication networks

Adaptive relaying protocol multiple-input multiple-output orthogonal frequency division multiplexing systems

In wireless broadband communications, orthogonal frequency division multiplexing (OFDM) has been adopted as a promising technique to mitigate multi-path fading and provide high spectral efficiency. In addition, cooperative communication can explore spatial diversity where several users or nodes share their resources and cooperate through distributed transmission. The concatenation of the OFDM technique with relaying systems can enhance the overall performance in terms of spectral efficiency and improve robustness against the detrimental effects of fading. Hybrid relay selection is proposed to overcome the drawbacks of conventional forwarding schemes. However, exciting hybrid relay protocols may suffer some limitations when used for transmission over frequency-selective channels. The combination of cooperative protocols with OFDM systems has been extensively utilized in current wireless networks, and have become a promising solution for future high data rate broadband communication systems including 3D video transmission. This thesis covers two areas of high data rate networks. In the first part, several techniques using cooperative OFDM systems are presented including relay selection, space time block codes, resource allocation and adaptive bit and power allocation to introduce diversity. Four (4) selective OFDM relaying schemes are studied over wireless networks; selective OFDM; selective OFDMA; selective block OFDM and selective unequal block OFDM. The closed-form expression of these schemes is derived. By exploiting the broadcast nature, it is demonstrated that spatial diversity can be improved. The upper bound of outage probability for the protocols is derived. A new strategy for hybrid relay selection is proposed to improve the system performance by removing the sub-carriers that experience deep fading. The per subcarrier basis selection is considered with respect to the predefined threshold signal-to-noise ratio. The closed-form expressions of the proposed protocol in terms of bit error probability and outage probability are derived and compared with conventional hybrid relay selection. Adaptive bit and power allocation is also discussed to improve the system performance. Distributed space frequency coding applied to hybrid relay selection to obtain full spatial and full data rate transmission is explored. Two strategies, single cluster and multiple clusters, are considered for the Alamouti code at the destination by using a hybrid relay protocol. The power allocation with and without sub-carrier pairing is also investigated to mitigate the effect of multipath error propagation in frequency-selective channels. The second part of this thesis investigates the application of cooperative OFDM systems to high data rate transmission. Recently, there has been growing attention paid to 3D video transmission over broadband wireless channels. Two strategies for relay selection hybrid relay selection and first best second best are proposed to implement unequal error protection in the physical layer over error prone channels. The closed-form expressions of bit error probability and outage probability for both strategies are examined. The peak signal-to-noise ratio is presented to show the quality of reconstruction of the left and right views

Cooperative Transmission Techniques in Wireless Communication Networks

Cooperative communication networks have received significant interests from both academia and industry in the past decade due to its ability to provide spatial diversity without the need of implementing multiple transmit and/or receive antennas at the end-user terminals. These new communication networks have inspired novel ideas and approaches to find out what and how performance improvement can be provided with cooperative communications. The objective of this thesis is to design and analyze various cooperative transmission techniques under the two common relaying signal processing methods, namely decode-and-forward (DF) and amplify-and-forward (AF). For the DF method, the thesis focuses on providing performance improvement by mitigating detection errors at the relay(s). In particular, the relaying action is implemented adaptively to reduce the phenomenon of error propagation: whether or not a relay’s decision to retransmit depends on its decision variable and a predefined threshold. First, under the scenario that unequal error protection is employed to transmit different information classes at the source, a relaying protocol in a singlerelay network is proposed and its error performance is evaluated. It is shown that by setting the optimal signal-to-noise ratio (SNR) thresholds at the relay for different information classes, the overall error performance can be significantly improved. Second, for multiple-relay networks, a relay selection protocol, also based on SNR thresholds, is proposed and the optimal thresholds are also provided. Third, an adaptive relaying protocol and a low-complexity receiver are proposed when binary frequency-shift-keying (FSK) modulation is employed and neither the receiver nor the transmitter knows the fading coefficients. It is demonstrated that large performance improvements are possible when the optimal thresholds are implemented at the relays and destination. Finally, under the scenario that there is information feedback from the destination to the relays, a novel protocol is developed to achieve the maximum transmission throughput over a multiple-relay network while the bit-error rate satisfies a given constraint. With the AF method, the thesis examines a fixed-gain multiple-relay network in which the channels are temporally-correlated Rayleigh flat fading. Developed is a general framework for maximum-ratio-combining detection when M-FSK modulation is used and no channel state information is available at the destination. In particular, an upper-bound expression on the system’s error performance is derived and used to verify that the system achieves the maximal diversity order. Simulation results demonstrate that the proposed scheme outperforms the existing schemes for the multiple-relay network under consideration

Detect-and-forward relaying aided cooperative spatial modulation for wireless networks

A novel detect-and-forward (DeF) relaying aided cooperative SM scheme is proposed, which is capable of striking a flexible tradeoff in terms of the achievable bit error ratio (BER), complexity and unequal error protection (UEP). More specifically, SM is invoked at the source node (SN) and the information bit stream is divided into two different sets: the antenna index-bits (AI-bits) as well as the amplitude and phase modulation-bits (APM-bits). By exploiting the different importance of the AI-bits and the APM-bits in SM detection, we propose three low-complexity, yet powerful relay protocols, namely the partial, the hybrid and the hierarchical modulation (HM) based DeF relaying schemes. These schemes determine the most appropriate number of bits to be re-modulated by carefully considering their potential benefits and then assigning a specific modulation scheme for relaying the message. As a further benefit, the employment of multiple radio frequency (RF) chains and the requirement of tight inter-relay synchronization (IRS) can be avoided. Moreover, by exploiting the benefits of our low-complexity relaying protocols and our inter-element interference (IEI) model, a low-complexity maximum-likelihood (ML) detector is proposed for jointly detecting the signal received both via the source-destination (SD) and relay-destination (RD) links. Additionally, an upper bound of the BER is derived for our DeF-SM scheme. Our numerical results show that the bound is asymptotically tight in the high-SNR region and the proposed schemes provide beneficial system performance improvements compared to the conventional MIMO schemes in an identical cooperative scenario.<br/

Joint Source-Channel Coding of JPEG 2000 Image Transmission Over Two-Way Multi-Relay Networks

In this paper, we develop a two-way multi-relay scheme for JPEG 2000 image transmission. We adopt a modified time-division broadcast (TDBC) cooperative protocol, and derive its power allocation and relay selection under a fairness constraint. The symbol error probability of the optimal system configuration is then derived. After that, a joint source-channel coding (JSCC) problem is formulated to find the optimal number of JPEG 2000 quality layers for the image and the number of channel coding packets for each JPEG 2000 codeblock that can minimize the reconstructed image distortion for the two users, subject to a rate constraint. Two fast algorithms based on dynamic programming (DP) and branch and bound (BB) are then developed. Simulation demonstrates that the proposed JSCC scheme achieves better performance and lower complexity than other similar transmission systems

Turbo trellis-coded hierarchical modulation assisted decode-and-forward cooperation

Hierarchical modulation, which is also known as layered modulation, has been widely adopted across the telecommunication industry. Its strict backward compatibility with single-layer modems and its low complexity facilitate the seamless upgrading of wireless communication services. The potential employment of hierarchical modulation in cooperative communications has the promise of increasing the achievable throughput at a low power consumption. In this paper, we propose a single-relay aided hierarchical modulation based cooperative communication system. The source employs a pair of Turbo Trellis-Coded Modulation schemes relying on specially designed hierarchical modulation, while the relay invokes the Decode-and-Forward protocol. We have analysed the system’s achievable rate as well as its bit error ratio using Monte-Carlo simulations. The results demonstrate that the power consumption of the entire system is reduced to 3.62 dB per time slot by our scheme

Cooperative systems based signal processing techniques with applications to three-dimensional video transmission

Three-dimensional (3-D) video has recently emerged to offer an immersive multimedia experience that can not be offered by two-dimensional (2-D) video applications. Currently, both industry and academia are focused on delivering 3-D video services to wireless communication systems. Modern video communication systems currently adopt cooperative communication and orthogonal frequency division multiplexing (OFDM) as they are an attractive solution to combat fading in wireless communication systems and achieve high data-rates. However, this strong motivation to transmit the video signals over wireless systems faces many challenges. These are mainly channel bandwidth limitations, variations of signal-to-noise ratio (SNR) in wireless channels, and the impairments in the physical layer such as time varying phase noise (PHN), and carrier frequency offset (CFO). In response to these challenges, this thesis seeks to develop efficient 3-D video transmission methods and signal processing algorithms that can overcome the effects of error-prone wireless channels and impairments in the physical layer. In the first part of the thesis, an efficient unequal error protection (UEP) scheme, called video packet partitioning, and a new 3-D video transceiver structure are proposed. The proposed video transceiver uses switching operations between various UEP schemes based on the packet partitioning to achieve a trade- off between system complexity and performance. Experimental results show that the proposed system achieves significantly high video quality at different SNRs with the lowest possible bandwidth and system complexity compared to direct transmission schemes. The second part of the thesis proposes a new approach to joint source-channel coding (JSCC) that simultaneously assigns source code rates, the number of high and low priority packets, and channel code rates for the application, network, and physical layers, respectively. The proposed JSCC algorithm takes into account the rate budget constraint and the available instantaneous SNR of the best relay selection in cooperative systems. Experimental results show that the proposed JSCC algorithm outperforms existing algorithms in terms of peak signal-to-noise ratio (PSNR). In the third part of the thesis, a computationally efficient training based approach for joint channel, CFO, and PHN estimation in OFDM systems is pro- posed. The proposed estimator is based on an expectation conditional maximization (ECM) algorithm. To compare the estimation accuracy of the proposed estimator, the hybrid Cram´er-Rao lower bound (HCRB) of hybrid parameters of interest is derived. Next, to detect the signal in the presence of PHN, an iterative receiver based on the extended Kalman filter (EKF) for joint data detection and PHN mitigation is proposed. It is demonstrated by numerical simulations that, compared to existing algorithms, the performance of the proposed ECM-based estimator in terms of the mean square error (MSE) is closer to the derived HCRB and outperforms the existing estimation algorithms at moderate-to-high SNRs. Finally, this study extends the research on joint channel, PHN, and CFO estimation one step forward from OFDM systems to cooperative OFDM systems. An iterative algorithm based on the ECM in cooperative OFDM networks in the presence of unknown channel gains, PHNs and CFOs is applied. Moreover, the HCRB for the joint estimation problem in both decode-and-forward (DF) and amplify-and-forward (AF) relay systems is presented. An iterative algorithm based on the EKF for data detection and tracking the unknown time-varying PHN throughout the OFDM data packet is also used. For more efficient 3-D video transmission, the estimation algorithms and UEP schemes based packet portioning were combined to achieve a more robust video bit stream in the presence of PHNs. Applying this combination, simulation results demonstrate that promising bit-error-rate (BER) and PSNR performance can be achieved at the destination at different SNRs and PHN variance. The proposed schemes and algorithms offer solutions for existing problems in the techniques for applications to 3-D video transmission